Matelec FPC-11010 Manual de usuario

1P: 1800 281 282 |F: 1300 281 282 |E: info@matelecaustralia.com.au |W: www.matelecaustralia.com.au

QUICK START GUIDE

Low Level Pump Shut-Off Controller

Standard - FPC-11010

Introduction

MATelec Australia’s Low Level Pump Shut-Off Controller is designed to provided power supply to a pump, used to pump water from a

tank into a home or other application. Housed in a robust polycarbonate enclosure, the controller features status indicator lights, a

GPO for power supply to the pump and a 9006 Float Switch with quick plug connection.The controller shuts off power to the pump

when tank is empty, preventing the pump from running dry.

V1.1

Safety

This control panel has been designed and built for applications that are Commercial and/or Industrial in nature, operation,function

and location. If the control panel is to be used in Domestic/Residential applications, further consideration is required by the installer

to ensure its suitability. It is the responsibility of the installing electrician to ensure compliance with relevant standards.

• Prior to installation, ensure power supply is isolated.

• Electrical connection to the panel must be carried out in accordance with the following pages.

• Additions or modiﬁcations to the control panel are not permitted and will void warranty.

• The controller is not intended for use by children or inﬁrm persons without supervision.

• Repairs to the controller must only be carried out by a suitably qualiﬁed electrician.

This operation manual makes use of the following symbols to indicate warnings that must be paid speciﬁc attention to:

Damage to equipment or personal harm may occur if this instruction is not followed

Electrical risk (electrocution hazard) may occur if this instruction is not followed

POWER

TANK

EMPTY

Ball

Valve

Closed

Open

Low Level

Float Switch

Foot

Valve

Pump

240Vac

6Amp max

To House

Mains Water

2P: 1800 281 282 |F: 1300 281 282 |E: info@matelecaustralia.com.au |W: www.matelecaustralia.com.au

Warning: All electrical connections must be carried out by a suitably

qualiﬁed and registered electrician

Step 3 - Connections

Close and secure enclosure door, connect the power lead into RCD protected GPO and switch on mains power.The Low Level Pump

Shut-Off Controller is now set up and has begun operation.

Step 1 - Installation

• Use the supplied mounting brackets to install the control panel.

• Control panel enclosure must be mounted in a vertical position.

• Ensure mounting method does not compromise enclosure weatherproof rating.

• Ensure cables/conduits entering the panel have mechanical protection and that the penetrations are sealed and do not

compromise the weatherproof rating of the enclosure.

Front View Side View

Bottom

Mounting Frame/Wall

TopMounting Holes

Step 4 - Powerup

• Connect the ﬂoat switch to the quick plug socket on the underside of the panel.

• Connect the pump (6 Amp max) to the GPO on the underside of the panel.

Step 2 - Float Switch Installation

• Install the ﬂoat switch in the tank/pit using a suitable method.

• The included ﬂoat switch is wired to close on rise, so power to the pump will be shut off when the

ﬂoat switch opens. Ensure the ﬂoat is at the correct height in the tank/pit.

• Adjust the switching differential, if required, by moving the cable weight position relative to the ﬂoat

switch.

Tabla de contenidos

Otros manuales de Controladores de Matelec

Matelec

Matelec FPC-30040 Instrucciones de uso

Matelec

Matelec FPC-30000 Instrucciones de uso

Matelec

Matelec FPC-15007 Instrucciones de uso

Matelec

Matelec FPC-30030 Instrucciones de uso

Matelec

Matelec FPC-12724 Instrucciones de uso

Matelec

Matelec FPC-15207 Instrucciones de uso

Matelec

Matelec FPC-30010 Manual de usuario

Matelec

Matelec FPC-30020 Instrucciones de uso

Matelec

Matelec FPC-32020 Instrucciones de uso

Matelec

Matelec FPC-30020-CON Instrucciones de uso

Matelec

Matelec FPC-30240 Instrucciones de uso

Matelec

Matelec FPC-12720 Manual de usuario

Matelec

Matelec FPC-30002 Instrucciones de uso

Matelec

Matelec FPC-30040-CON Instrucciones de uso

Matelec

Matelec RPC-30030 Instrucciones de uso

Matelec

Matelec FPC-36040 Instrucciones de uso

Matelec

Matelec FPC-12725 Instrucciones de uso

Matelec

Matelec FPC-30010 Instrucciones de uso

Matelec

Matelec Hydrowhiz FPC-63X21 Manual de usuario

Matelec

Matelec FPC-15205 Instrucciones de uso

Matelec

Matelec FPC-30220 Instrucciones de uso

Matelec

Matelec FPC-15007-INT Instrucciones de uso

Matelec

Matelec FPC-15007-CON Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario