Marshall Electronics V-RD151-4 Manual de usuario

V-RD151-

Users Guide

Product Overview

Features

Electrical Specifications

Mechanical Specifications

Installation

Input Connectors

Switch Settings and Indicators

Primary Menu Functions

Alternate Menu Functions

Analog PC Menu Functions

Warranty

Volume adjustment does not function •

Displayed source selection •

MODE adjustment does not function •

System Functions •

System Reset •

OSD Timeout •

OSD Position •

System Info •

Contrast, Color, Brightness Adjust •

System Menu in Analog PC Mode •

PC Display Position Adjust (Not available in Composite or S-Video mode) •

PC Input Automatic Configuration •

Marshall Electronics warranties to the first consumer, that this V-RD151-4 rackmount monitor will, under normal use, be free from defects in workmanship

and materials, when received in its original container, for a period of one year from the purchase date.

This warranty is extended to the first consumer only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with

a warranty claim, Marshall Electronics reserves the right, not to honor the warranty set forth above. Therefore, labor and parts may be charged to you.

This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications in design or con-

struction, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than those described above,

or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.

Due to constant effort to improve products and product features, specifications may change without notice.

Warranty

Alternate Menu Functions

Menu is shown by holding down ALT and then pressing the

MENU button. (ALT+MENU). Function selection and cursor

movement is performed with the source selection buttons.

CH1 - ID Input 5 character

label for each source

CH2 - Date/Time Setup

CH3 - Sequence (Off to30 Second) Changes displayed image at programmed

intervals when SEQN function is selected

CH4 - Miscellany. PIP FORMAT- position and number of PIP windows.

DATE/TIME-CH DISPLAY - Characters are displayed on the screen over video images.

* NOTE: Date/Time and Channel Display overlay is not available in PC ANALOG or S-VIDEO modes

Analog PC Menu Functions

System Menu in Analog PC Mode

* Note: When in PC Analog mode to change the source press the SELECT

button with no OSD is displayed on screen

Menu Selected

System Display in Pixels and Frequency

PC Display Position Adjust

(Not available in Composite or S-Video mode)

PC Image Phase and Clock Adjust

(Not available in Composite or S-Video mode)

PC Input Automatic Configuration

(Auto config requires signal to be present

on VGA connector)

Marshall Electronics

1910 East Maple Ave.

El Segundo, CA 90245

Tel.: 800-800-6608 • Fax: 310-333-0688

www.LCDRacks.com

Email: [email protected]

Product Overview

The V-RD151P-4 is space saving monitor in a drawer with a high-resolution 1024 × 768 pixel 15” display.

This model also features a Quad Split and Sequential Switcher for composite video signals. The Quad Split

feature allows any mix of the four composite video channels to appear on the monitor as real time picture-

in-picture images. For added flexibility, this unit can accommodate composite video, Y/C (S-Video) or XGA

computer signals for monitoring (S-Video and XGA inputs are only available in full screen mode). All con-

nections are accessed from the rear of the drawer enclosure and include a loop through for each signal.

When the display is closed into the drawer, the monitor will automatically be placed into standby mode and

a keyed lock is provided for secure transport. V-PS12-5V-1 Power supply and owners manual are included.

Display (Viewing Area) 15.1” (11.69”H × 9.12”V) (29.7cm × 23.1cm)

Viewing Angle 1700In any direction

Resolution (Dots) 1280H × 768V / 2.95 million pixels

Dot Pitch 0.297mm × 0.302mm

Number of Colors 16.7 Million

Brightness (in cd/m²) 250 cd/m²

Contrast Ratio 500:1

System NTSC - V-RD151-4

PAL - V-RD151-4-PAL

Inputs Composite-BNC 75W, Y/C (S-Video)-4 Pin Mini-din Female,

Scalable XGA HD-15 Female,

12VDC-Conxall Female

Outputs Composite Active Loop-BNC, SDI Active Loop-BNC,

Y/C (S-video) Active Loop-4 Pin Mini-din Female, 10-bit D/A out-BNC

Power required 12VDC, 5.0Amps peak

V-RD151-4 Dimensions 19.12”W × 1.75 “H × 22”D (48.5cm × 4.5cm × 55.8cm)

V-RD151-4 Approx. Weight 24.15 lbs (10.94kg)

V-PS12-5V-1Power Supply Weight 1 lbs (0.45kg)

 High Resolution 1024 × 768 pixels, 786,432 total

 Bright 250 candle luminance

 4 Video inputs with 75Ωtermination and active loop through feature

 Ultra-compact design fits in EIA standard rack 1U high

 Built-in Quad Splitter/Sequential Switcher

 Available in NTSC or PAL format

 Key lock for secure transportation

V-RD151-4 USERS GUIDE

Features

Electrical Specifications

Mechanical Specifications

Installation

MODE adjustment does not function

System Functions

RESET - resets the monitor to factory defaults.

TV - does not function on this model

OSD TIMEOUT- Adjust timeout of menu display. OSD - (On Screen Display)

OSD POSITION- adjust placement of OSD

SYSTEM INFO- Displays system conﬁguration information

OSD Position

SELECT

Menu Control

System Reset

SELECT

Menu Control

OSD Timeout

SELECT

Menu Control

SELECT

Menu Control

System Info

SELECT

Menu Control

SELECT

Menu Control

Contrast Color Brightness No Function

Contrast, Color, Brightness Adjust

1. The V-RD151-4 includes the following items:

2. 2. Unpack the V-RD151-4, mounting hardware and accompanying V-PS12-5V1 power supply.

Physically inspect for any damage that may have occurred during shipping. Should there be any dam-

age, immediately contact Marshall Electronics at 800-800-6608. If you are not located within the conti-

nental united states call +1 310-333-0606.

1. V-RD151-4 Drawer Monitor Assembly

2. 2 Drawer Lock Keys

3. 2 Adjustable Rear Support Brackets

4. 4 Rear Bracket Thumb Screws

Marshall Electronics

3. After inspection, attach adjustable rear support brackets using the supplied thumbscrews and install the

V-RD151-4 in your desired location of a standard EIA 19-inch equipment rack. Adequate ventilation is

required when installed to prevent possible damage to the internal components.

S-Video IN

4 Pin Din

(Female)

Pin1 - GND

Pin2 - GND

Pin3 – Y in

Pin4 – C in

VGA IN

HD-15

(FEMALE)

Pin1-Red IN

Pin2-Grn IN

Pin3-Blu IN

Pin4-

Pin5-

Pin6-Gnd

Pin7-Gnd

Pin8-Gnd

Pin 9-

Pin10-

Pin11-

Pin12-

Pin13-

Pin14-HSync

Pin15-VSync

Composite

Video IN 1 to 4

Attached bracketThumbscrews and

rear support bracket

Input Connectors

Active Composite

Video out 1 to 4

12 VDC from

V-PS12-5V1 power

supply

Left Pin - Pos

Right Pin- Neg

S-Video OUT

4 Pin Din (Female)

Pin1 - GND

Pin2 - GND

Pin3 – Y in

Pin4 – C in

* All Outputs Require Power to be applied for activation

4. Connect required cables for signal input and output.

5. Plug the V-PS12-5V1 power supply into the A.C. source.

6. Attach the twist lock Conxal power connection from V-PS12-5V1 power supply to the back of the drawer.

7. Completely Slide the V-RD151-4 out from the drawer and tilt to your desired viewing angle.

8. Turn on the V-RD151-4 by depressing the power switch located on the front of the unit.

Note: All BNC connectors should be rated for 75Ω.

Note: Power must be applied to the V-RD151-4 to activate loop through video connections

Marshall Electronics

C. Primary Menu Controls

Power On/Off selection switch illuminates when monitor is switched on.

Primary menu functions are accessed by pressing the MENU button.

Volume adjustment

does not function

Switch Settings and Indicators

Drawer close interlock micro-switch places

monitor into standby mode when in stored position

A. Digital Process Controls

(DPC)-not available in PC or S-Video Modes

Quad - 4 channels displayed simultaneously on the screen.

PIP - Picture in Picture menu selected display of 2 to 4 channels.

Zoom - expands a selected portion of the display

Freeze - of full screen image

SEQN - menu selected channel display for 2 to 4 channels of full screen

image. Sequence switching can be set for 1 to 30 second intervals.

MENU - enables alternate menu

ALT - shift control for selection of highlighted functions

B. Composite Video Controls

Selection for full frame viewing of composite video channels 1 to 4.

Also used for Cursor controls of alternate menu functions.

Illuminates when channel is selected.

* NOTE: Digital Process Control is not available in PC ANALOG or S-VIDEO modes

Displayed source selection

SELECT

Menu Control

PC Analog - Selects input from the HD15 VGA IN connector.

Image is full screen. No DPC functions

Composite - Selects input of composite video 1 to 4 plus DPC functions

S-VHS - Selects input from the

S-VIDEO IN connector. Image is

full screen. No DPC functions

Television - does not function on this model

Primary Menu Functions

V-RD151-4 USERS GUIDE

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Monitor de Marshall Electronics

Marshall Electronics

Marshall Electronics M-CT7 Manual de usuario

Marshall Electronics

Marshall Electronics V-R185-DLW Manual de usuario

Marshall Electronics

Marshall Electronics V-R82P Manual de usuario

Marshall Electronics

Marshall Electronics V-R44P-DVI Manual de usuario

Marshall Electronics

Marshall Electronics V-MD151 Manual de usuario

Marshall Electronics

Marshall Electronics V-ASL7070 Manual de usuario

Marshall Electronics

Marshall Electronics V-R65P-HD Manual de usuario

Marshall Electronics

Marshall Electronics V-R231-IMD-HDSDI Manual de usuario

Marshall Electronics

Marshall Electronics V-R842DP-DVI Manual de usuario

Marshall Electronics

Marshall Electronics M-Lynx-15 Manual de usuario

Marshall Electronics

Marshall Electronics QV171-HDSDI Manual de usuario

Marshall Electronics

Marshall Electronics V-MD902 Manual de usuario

Marshall Electronics

Marshall Electronics V-R1042DP-AFHD Manual de usuario

Marshall Electronics

Marshall Electronics V-R261P-AFHD Manual de usuario

Marshall Electronics

Marshall Electronics V-R261-IMD-HDSDI Manual de usuario

Marshall Electronics

Marshall Electronics M-Lynx-10 Manual de usuario

Marshall Electronics

Marshall Electronics V-R151DP-AFSD Manual de usuario

Marshall Electronics

Marshall Electronics V-R653SB-IMD Manual de usuario

Marshall Electronics

Marshall Electronics Dual 10.4-inch LCD Rack Mounted Monitor... Manual de usuario

Marshall Electronics

Marshall Electronics V-R84DP-HDSDI Manual de usuario

Marshall Electronics

Marshall Electronics V-MD1012 Manual de usuario

Marshall Electronics

Marshall Electronics V-R1042DP-TE4U Manual de usuario

Marshall Electronics

Marshall Electronics V-R901DP-AFHD Manual de usuario

Marshall Electronics

Marshall Electronics V-R72DP Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación