Marshall Electronics V-R151-4P Manual de usuario

MarshallElectronics

15” Rackmountable

LCD PANEL with

Quad-Splitter

V-R151-4P

Broadcast Multimedia Division

MarshallElectronics

El Segundo, California

www.LCDRacks.com

Page 11

1. Installation ....................................................................................3

1) Before Installation ......................................................................3

2) Components ..............................................................................3

3) Operation....................................................................................3

4) Tally ............................................................................................3

5) Mounting ....................................................................................3

6) Connections................................................................................4

2. Computer ......................................................................................5

1) Computer Mode Selection ........................................................5

2) Horizontal pan / Vertical Pan control ........................................5

3) Value Default ............................................................................5

4) Color Change ............................................................................5

5) Input Condition Control..............................................................5

3. Composite Video / S-VHS............................................................6

1) Composite Video / S-VHS Selection........................................6

2) Value Default............................................................................6

3) Video Mode ..............................................................................6

4) Color Change ..........................................................................6

4. Menu Tree ....................................................................................7

1) Computer ..................................................................................7

2) Video ........................................................................................7

3) OSD Control..............................................................................8

4) System Control Menu Tree........................................................8

5. Quad-Splitter ................................................................................9

6. Warranty........................................................................................10

Page 2

Table of Contents

Page 10

1. Installation

1) Before Installation

nBefore using your monitor, make sure to read this manual carefully. In case of any problems

with installation, contact Marshall Electronics.

nThe monitor should be handled with caution and not be exposed to impact or shock.

nThe display area is highly prone to scratches. Use cleaner suggested by the authorized

service center.

nDo not expose the monitor in high temperature or in high humidity.

nThere are no user serviceable parts inside your monitor. To avoid risk of electric shock, do not

open your monitor case!

2) Components

Rackmountable TFT LCD Monitor- 1 pc

DC Power Supply Adapter -1 pc

Power Cable 1- pc

Computer Cable 1 pc

3) Operation

Multiple Input Terminal Video Inputs

4) Tally

The V-R151-4P comes with four tally lights installed to correspond with the quad split screen.

The lights are operated by inserting a DB9 plug into the jack marked ‘TALLY’ on the rear of the

unit. The lights will come on by closing the two contacts together. DO NOT GIVE POWER TO

THIS PLUG IT IS SELF-POWERED. The pinout is as follows: Pin 1 is for Tally light 1; Pin 2

is for Tally light 2; Pin 3 is for Tally light 3; Pin 4 is for Tally light 4. Pins 6 - 9 are used as

common grounds for the system. Pin 5 is not used.

5) Mounting

The V-R151-4P is designed to fit in a

EIA standard 19” rack. It requires 6

rack units of vertical space and is

secured with eight screws. It may be

necessary to center the unit up or

down so that it does not touch any

adjacent units when the unit is tilted

up or down.

Page 3

6. Warranty

Marshall Electronics warranties to the first consumer, that this V-R151-4P rackmount monitor will,

under normal use, be free from defects in workmanship and materials, when received in its original

container, for a period of one year from the purchase date.

This warranty is extended to the first consumer only and proof of purchase is necessary to honor the

warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics

reserves the right, not to honor the warranty set forth above. Therefore, labor and parts may be

charged to you.

This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or han-

dling, improper alterations or modifications in design or construction, voids this warranty.

No sales personnel of the seller, nor any other person is authorized to make any warranties other

than those described above, or to extend the duration of any warranties on behalf of Marshall

Electronics, beyond the time period described above.

Due to constant effort to improve products and product features, specifications may change without

notice. 1 2 3 4 TALLY

MONITOR

INSTALLATION cont.

Page 4 Page 9

POWER SUPPLY

S-VHS

5. The Quad Splitter

The quad splitter buttons, located on the left of the unit, are dual function buttons, the functions are

indicated above and below each button. The four buttons on the right are used to select the video

channel, in the zoom mode and the setup mode, these buttons will be used to navigate around the

screen and will be explained later. The four buttons on the left are used to setup the quad splitter and

also to use the digital freeze, sequential switcher functions and setup menu. To access these func-

tions it is necessary to press the ALT button along with the desired function, ie. for the FREEZE func-

tion, press the ALT button and the FREEZE button together. The buttons on the left are used as fol-

lows:

Video Loss Detection: This unit is equipped with Video Loss Detection, “VLD”. Should any signal

get lost, the unit will automatically go into a Quad-Splitter mode and the letters “VLD” will blink in the

corresponding quadrant to indicate that a video signal has been lost.

ZOOM: Enters the 2X digital zoom mode at the single screen mode. Press once to zoom in, press

again to zoom out. the zoom mode is only available in the single screen mode and not in any of the

multi-screen modes. In the zoom mode, a boundary will appear in the center of the screen. The but-

tons with the arrows beneath them can now be used to move the boundary around the screen. To

make the boundary fill the entire screen, press the QUAD key, the arrow buttons can still be used to

move the zoomed portion around the screen. The zoom mode can be used in conjunction with the

FREEZE mode. The zoom mode can be exited by pressing the ZOOM button again.

FREEZE: The freeze mode is accessed by pressing the ALT button simultaneously with the FREEZE

button. This mode can be used either in full-screen mode or quad or PIP mode. The freeze function

can be toggled to other video channels by pressing the channel buttons. To release the freeze func-

tion, press the ALT and FREEZE buttons simultaneously again.

Picture-In-Picture, PIP: The PIP is a priority monitoring function. While the quad screen gives equal

priority, or size to each channel, the PIP gives one channel the full screen with the other three appear-

ing in smaller boxes within the screen. The PIP boxes can be arranged horizontally or vertically via

the SETUP menu. To change the priority of the four channels, simply press the PIP button as need-

ed.

Sequential Switcher, SEQN: The sequential switcher can be activated by pressing the ALT and

SEQN buttons simultaneously. The time delay for each channel can be set up in the SETUP menu.

To skip a channel in the sequence, set the dwell to 0.

Quad-Splitter, QUAD: By pressing the QUAD button, the screen will show all four video inputs simul-

taneously. Each of the screens can have a user designated ID which is done through the SETUP

menu. To exit the quad function, press any of the 4 video channels. The unit will also go into a quad

mode when a video signal loss is detected and the quadrant will have the letter ‘VLD’ signifying Video

Loss Detected.

Setup menu, MENU: The SETUP menu can be accessed by pressing ALT and MENU simultane-

ously. Any of the four sub-menus can be chosen by pressing the corresponding ‘CH’ button, ie sub-

menu 1 is accessed by pressing ‘CH 1’ button. When a sub-menu is selected, the number in the [ ]

will highlight and blink. The bottom of the screen will give any further instructions to navigate through

this menu.

Page 5Page 8

2. Computer

1) Computer Mode Selection

Press (INPUT) using the UP, DOWN keys press

(MONITOR) and than press select.

2). Horizontal Pan / Vertical Pan Control

Press (HORIZONTAL PAN ) or (VERTICAL PAN) control

(HORIZONTAL PAN) or (VERTICAL PAN) by pressing the UP, DOWN keys.

3) Value Default

Press (SYSTEM SETTING) press (VALUE

DEFAULT) press (System control values will be initialized as this

monitor is manufactured.)

4) Color Change

Press (COLOR CHANGE) one of 4 modes to set

you can control selected sub-menu with the UP, DOWN keys press

sub-menu (4 color mode) will appear repeat the above steps

until you have settled color change press when you press menu,

you will be asked whether (SAVE YES) or (SAVE NO) one of the

two options.

Color Change sub-menu will be limited to Brightness/Contrast only.

(If you press menu before selecting (SAVE YES), color will become invalid.)

5) Input Condition Control

Press (SYSTEM SETTING) (INPUT

CONDITION) one of the five modes to set.

Control the selected sub-menu with Select key

After tuning is settled, use key to escape from menu tree

3) OSD ( On Screen Display) control

Press Menu Select (System Setting) Select OSD U/D) or OSD L/R)

use the UP, DOWN keys

4) System Control Menu Tree

PC TV COMPOSITE S-VHS

HORIZONTAL PAN 0

VERTICAL PAN 0

VALUE DEFAULT 0 0 0 0

CHANNEL ADD / REMOVE 0

TV=AIR CH 0

MODE 0 0

INPUT CONDITION 0

VOLUME ADJUSTMENT 0 0 0

BRIGHTNESS 0 0 0 0

CONTRAST 0 0 0 0

HUE 0 0 0

COLOR 0 0 0

Page 6 Page 7

3. Composite Video / S-VHS

1) Composite Video / S-VHS Selection

Press (INPUT) using the UP, DOWN keys press (COMPOSITE) or

(S-VHS) and than press

2) Value Default

Press (MODE) press (NTSC) or (PAL) depends on manu-

factured country Video Mode will not work on (TV) and (Monitor)

3) Color Change

Press (COLOR CHANGE) one of 4 modes to set you can control

selected sub-menu with the UP, DOWN keys press sub-menu (4 color mode will

appear repeat the above steps until you have settled color change press when

you press , you will be asked whether (SAVE YES) or (SAVE NO) one of the

two options.

(If you press menu before selecting (SAVE, YES) color change will become invalid.)

4. Menu Tree

1) PC Monitor

2) VIDEO

Tabla de contenidos

Otros manuales de Monitor de Marshall Electronics

Marshall Electronics

Marshall Electronics V-R72P-2HDSDI Manual de usuario

Marshall Electronics

Marshall Electronics V-R573P Manual de usuario

Marshall Electronics

Marshall Electronics V-R241-IMD-3G Manual de usuario

Marshall Electronics

Marshall Electronics M-LYNX-702 Manual de usuario

Marshall Electronics

Marshall Electronics V-LCD70W-SH Manual de usuario

Marshall Electronics

Marshall Electronics V-R902DLW Manual de usuario

Marshall Electronics

Marshall Electronics V-LCD70XP-3GSDI Manual de usuario

Marshall Electronics

Marshall Electronics V-R72DP Manual de usuario

Marshall Electronics

Marshall Electronics M-CT7 Manual de usuario

Marshall Electronics

Marshall Electronics V-MD902 Manual de usuario

Marshall Electronics

Marshall Electronics AR-AM4 Manual de usuario

Marshall Electronics

Marshall Electronics V-LCD173HR Manual de usuario

Marshall Electronics

Marshall Electronics V-R1041DP-TE Manual de usuario

Marshall Electronics

Marshall Electronics V-LCD171MD Manual de usuario

Marshall Electronics

Marshall Electronics V-R104DP-HDA Manual de usuario

Marshall Electronics

Marshall Electronics M-LYNX-702W Manual de usuario

Marshall Electronics

Marshall Electronics V-LCD651STX-HDA Manual de usuario

Marshall Electronics

Marshall Electronics V-R84DP-HDSDI Manual de usuario

Marshall Electronics

Marshall Electronics V-R82DP-SD Manual de usuario

Marshall Electronics

Marshall Electronics TFT-MegaPixel Monitor V-R70P-SD Manual de usuario

Marshall Electronics

Marshall Electronics QV261A-HDSDI Manual de usuario

Marshall Electronics

Marshall Electronics V-R842DP-DVI Manual de usuario

Marshall Electronics

Marshall Electronics M-CT710 Manual de usuario

Marshall Electronics

Marshall Electronics 8.4-inch TFT/LCD Monitor V-R84DP-SD Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación