Marshall Electronics VS-PTC-150 Hoja de especificaciones
Quick Setup Tech-note using VS-PTC-150 (Controller) with CV620 (Ca era)
1. Unpack CV620 (Camera) and VS-PTC-150 (Controller) and plug in po er sources.
2. Use RS-232 Cable packed in VS-PTC-150 (Controller) box and plug in VGA-style comm cable ith thumb
scre s to (Controller) and plug round 8-pin connector to CV620 (Camera).
3. Confirm (Controller) is set to CAM: 001 on LCD Screen, or 002, 003, 004 atching ADDRESS of Camera.
Also confirm both Controller and Camera are set to VISCA or PROTOCOL V.
4. Or use RS-422 ire harness on VS-PTC-150 (Controller) and CV620 (Camera) and plug 2 ires into each
end using one ire to connect from Controller (position #1 – Ta) to Camera (position #6 RXD IN -), then
connect other ire to connect from Controller (position #2 – Tb) to Camera (position #7 RXD IN +).
VS-PTC-150 Controller
CV620 Ca era
5. Confirm (Camera) is set to ADDRESS SELECTOR (Camera-ID) #1 position on back panel, or #2 ~ #7.
6. Make sure to match either VISCA or PELCO-D protocols, depending on hich is being used on Camera and
Controller. If using PELCO-D make sure to set menu to SYSTEM > Protocol > Protocol V for Visca or
SYSTEM > Protocol > Protocol PD for Pelco-D and/or System S itch on bottom of camera DIP#1 to ON for
RS-422 or OFF for RS-232.
7. Use the follo ing buttons on VS-PTC-150 (Controller) to control Camera functions:
A. Joystick: controls Pan-Tilt (directional) - Zoom (t ist knob clock ise-zoom in, t ist knob counter
clock ise-zoom out) and navigates OSD Menu
B. Function Keys: controls certain functions on camera
C. Basic Co and Keys
- hen camera is set to Manual Focus these keys ill fine adjust Focus
- operates Lens Zoom IN+/OUT-
D. Preset & Recall PAN-TILT-ZOOM Locations: ability to PRESET certain shots on camera
i.) Choose location ith Pan-Tilt-Zoom controls to desired shot
ii.) Push PRESET button, then Number (1~127) Preset, and Enter to Save (and Esc)
vi.) to Recall location - Push SHOT then number key of saved location, and Enter
E. Other Functions & Operation of Controller can be found in VS-PTC-150 (Controller) Manual or
CV620 (Camera) can be found in CV620 Manual.
Otros manuales para VS-PTC-150
1
Tabla de contenidos
Otros manuales de Controladores de Marshall Electronics
Marshall Electronics
Marshall Electronics VS?TKC?100 Manual de usuario
Marshall Electronics
Marshall Electronics VS-PTC-50 Manual de usuario
Marshall Electronics
Marshall Electronics VS-PTC-150 Manual de usuario
Marshall Electronics
Marshall Electronics VS-PTC-50 Manual de usuario
Marshall Electronics
Marshall Electronics VS-PTC-50 Manual de usuario
Marshall Electronics
Marshall Electronics VS-PTC-200 Manual de usuario
Marshall Electronics
Marshall Electronics VS?TKC?100 Manual de usuario
