Marantz VP-12S3 Manual de usuario

RS232C Control Spec.

for

VP-12S3

Marantz America, Inc.

Nov. 22, 2003

Rev. 1.00

RS232C Control Specification for VP-12S3

1. PC Control

Interface

* RS-232C(Straight Cable)

* Baud rate:.....................................9600 bps

* Data length:..................................8 bits

* Parity:...........................................None

* Stop bit: ........................................1 bit

* Flow Control: ................................RTS/CTS

* Communication procedure:...........Full duplex

2. PC Control Command Reference

2.1. Command Communications Sequence

Projector returns ACK, NAK, or Status after reception of Command within 1 second.

An ASCII code is used for data. It is discriminated whether transmitting character sequences are a capital

letter and a small letter.

Although there is no distinction of a capital letter small letter, let a capital letter be a standard.

Command transmission and Status reply add Start Character and End Character as follows.

Start Character : ’@’

End Character : 0x0D

Command Sample : "@PWR?", 0x0D (Request Power Status)

Feedback Sample : "@PWR1", 0x0D, 0x0A (Power Status = On)

ACK and NAK use the following control code.

ACK(Reception success) :0x06, 0x0D, 0x0A

NAK(Reception failure) :0x15, 0x0D, 0x0A

A reception side cancels data before '@'. When 0x0D comes, with '@' not coming, NAK (reception failure) is

returned.

That which made Hex the ASCII code is used for transmission and reception of digital data.

Between a command and a numerical value, '/' is inserted as a delimiter.

For Example: When 26(decimal) of the number is expressed

'1', 'A'→0x31, 0x41

2.2. Normal Command

It is Command which demands processing.

In data other than an appointed command, or the state where '@' does not come, when 0x0D comes, it

becomes reception failure, and NAK is returned.

RS232C Control Specification for VP-12S3

Commands, such as Power On Command at the time of notes Standby (Fan operation), return only ACK,

when processing is not carried out.

For example: When Power On is sent to Projector.

Command transmission from PC.

"@PWR", 0x0D

After Command processing end and from a projector to a reply

0x06, 0x0D, 0x0A (ACK reception success)

or 0x15, 0x0D, 0x0A (NAK reception failure)

2.3. Request Status Command

It is Command which demands Status.

Projector returns Status or NAK.

In data other than an appointed command, or the state where '@' does not come, when 0x0D comes, it

becomes reception failure, and NAK is returned.

For Example: When Power Status is requested to Projector.

Command transmission from PC.

"@PWR?", 0x0D

After Command processing end and from a projector to a reply

"@PWR1", 0x0D, 0x0A (Power On)

or "@PWR0", 0x0D, 0x0A (Standby)

or 0x15, 0x0D, 0x0A (NAK reception failure)

RS232C Control Specification for VP-12S3

2.4. Normal Command List

Command Character Sample

Power On PWR1 "@PWR1",0x0D

Power Standby PWR0 "@PWR0",0x0D

Component 1 CMP1 "@CMP1",0x0D

Component 2 CMP2 "@CMP2",0x0D

S-Video SVD "@SVD",0x0D

Video VDO "@VDO",0x0D

RGB RGB "@RGB",0x0D

Source

AUX AUX "@AUX",0x0D

Theater 1 THE1 "@THE1",0x0D

Theater 2 THE2 "@THE2",0x0D

Theater 3 THE3 "@THE3",0x0D

Theater Default THED "@THED",0x0D

Standard 1 STD1 "@STD1",0x0D

Standard 2 STD2 "@STD2",0x0D

Standard 3 STD3 "@STD3",0x0D

Standard Default STDD "@STDD",0x0D

Dynamic 1 DYN1 "@DYN1",0x0D

Dynamic 2 DYN2 "@DYN2",0x0D

Dynamic 3 DYN3 "@DYN3",0x0D

Dynamic Default DYND "@DYND",0x0D

User A 1 USRA1 "@USRA1",0x0D

User A 2 USRA2 "@USRA2",0x0D

User A 3 USRA3 "@USRA3",0x0D

User B 1 USRB1 "@USRB1",0x0D

User B 2 USRB2 "@USRB2",0x0D

User B 3 USRB3 "@USRB3",0x0D

User C 1 USRC1 "@USRC1",0x0D

User C 2 USRC2 "@USRC2",0x0D

Preset

User C 3 USRC3 "@USRC3",0x0D

Normal NML "@NML",0x0D

Through THRH "@THRH",0x0D

Full FULL "@FULL",0x0D

Aspect

Zoom ZOOM "@ZOOM",0x0D

V-Mute On MUT1 "@MUT1",0x0D

V-Mute V-Mute Off MUT0 "@MUT0",0x0D

Keystone V + KEYV+ "@KEYV+",0x0D

Keystone V - KEYV- "@KEYV-",0x0D

Keystone V Keystone V +- ## KEYV/+-## "@KEYV/+0F",0x0D

Keystone H + KEYH+ "@KEYH+",0x0D

Keystone H - KEYH- "@KEYH-",0x0D

Keystone H Keystone H +- ## KEYH/+-## "@KEYH/+0F",0x0D

Focus On FOC1 "@FOC1",0x0D

Focus Focus Off FOC0 "@FOC0",0x0D

RS232C Control Specification for VP-12S3

Adjustment range

Command Minimum Center Maximum

Keystone V -1E (-30) 0 (0) +1E (+30)

Keystone H -14 (-20) 0 (0) +14 (+20)

Command Character Sample

Black Setup 0IRE BSET0 "@BSET0",0x0D

Black Setup Black Setup 7.5IRE BSET7 "@BSET7",0x0D

Lamp Mode High LMODEH "@LMODEH",0x0D

Lamp Mode Lamp Mode Low LMODEL "@LMODEL",0x0D

IRIS On IRIS1 "@IRIS1",0x0D

IRIS IRIS Off IRIS0 "@IRIS0",0x0D

Auto Power Off Enable APO1 "@APO1",0x0D

Auto Power Off Auto Power Off Disable APO0 "@APO0",0x0D

Cinema Auto CINEMA1 "@CINEMA1",0x0D

Cinema Cinema Off CINEMA0 "@CINEMA0",0x0D

Cursor Up UP "@UP", 0x0D

Cursor Down DOWN "@DOWN", 0x0D

Cursor Right RIGHT "@RIGHT", 0x0D

Cursor Left LEFT "@LEFT", 0x0D

Cursor Enter ENTER "@ENTER", 0x0D

Menu MENU "@MENU", 0x0D

Remote Control

Information INFO "

INFO"

0x0D

RS232C Control Specification for VP-12S3

2.5. Request Status Command List

Request

Status Request Command Answer Sample

On "@PWR1",0x0D, 0x0a

Power "@PWR?",0x0D Standby "@PWR0",0x0D, 0x0a

Component 1 "@CMP1",0x0D, 0x0a

Component 2 "@CMP2",0x0D, 0x0a

S-Video "@SVD",0x0D, 0x0a

Video "@VDO",0x0D, 0x0a

RGB "@RGB",0x0D, 0x0a

Source "@SRC?",0x0D

AUX "@AUX",0x0D, 0x0a

Theater 1 "THE1",0x0D, 0x0a

Theater 2 "THE2",0x0D, 0x0a

Theater 3 "THE3",0x0D, 0x0a

Theater Default "THED",0x0D, 0x0a

Standard 1 "STD1",0x0D, 0x0a

Standard 2 "STD2",0x0D, 0x0a

Standard 3 "STD3",0x0D, 0x0a

Standard Default "STDD",0x0D, 0x0a

Dynamic 1 "DYN1",0x0D, 0x0a

Dynamic 2 "DYN2",0x0D, 0x0a

Dynamic 3 "DYN3",0x0D, 0x0a

Dynamic Default "DYND",0x0D, 0x0a

User A 1 "USRA1",0x0D, 0x0a

User A 2 "USRA2",0x0D, 0x0a

User A 3 "USRA3",0x0D, 0x0a

User B 1 "USRB1",0x0D, 0x0a

User B 2 "USRB2",0x0D, 0x0a

User B 3 "USRB3",0x0D, 0x0a

User C 1 "USRC1",0x0D, 0x0a

User C 2 "USRC2",0x0D, 0x0a

Memory "@MEM?",0x0D

User C 3 "USRC3",0x0D, 0x0a

Normal "@NML",0x0D

Through "@THRH",0x0D

Full "@FULL",0x0D

Aspect "@ASP?",0x0D

Zoom "@ZOOM",0x0D

On "@MUT1",0x0D

V-Mute "@MUT?", 0x0D Off "@MUT0",0x0D

Keystone V "@KEYV?", 0x0D 12 "@KEYV/+0C",0x0D, 0x0a

Keystone H "@KEYH?", 0x0D -20 "@KEYH/-14",0x0D, 0x0a

On "@FOC1",0x0D, 0x0a

Focus "@FOC?", 0x0D Off "@FOC0",0x0D, 0x0a

RS232C Control Specification for VP-12S3

*1The contents of Error are indicated separately.

*2Version number shows Version of a RC-232C Command group.

Request

Status Request Command Answer Sample

0IRE "@BSET0",0x0D, 0x0a

Black Setup "@BSET?", 0x0D 7.5IRE "@BSET7",0x0D, 0x0a

High "LMODEH",0x0D, 0x0a

Lamp Mode "@LMODE?", 0x0D Low "LMODEL",0x0D, 0x0a

On "IRIS1",0x0D, 0x0a

IRIS "@IRIS?", 0x0D

Off "IRIS0",0x0D, 0x0a

Auto "@APO1",0x0D, 0x0a

Auto Power

Off "@APO?", 0x0D Off "@APO0",0x0D, 0x0a

Auto "@CINEMA1",0x0D, 0x0a

Cinema "@CNEMA?", 0x0D

Off "@CINEMA0",0x0D, 0x0a

RS232C Control Specification for VP-12S3

2.6. Special Command List

Request Status Request Command Answer Sample

Order Number "@ORDER", 0x0D 07AV "@07AV",0x0D, 0x0a

Main u-com Build

Num. "@BUILD_MAIN?",

0x0D Build 0025 "0025",0x0D, 0x0a

Sub u-com Build Num. "@BUILD SUB?", 0x0D Build 0025 "0025",0x0D, 0x0a

Sub Boot Version "@VER_BOOT?", 0x0D Ver 0.10 "0010",0x0D, 0x0a

Sub u-com Version "@VER_SUB?", 0x0xD Ver 0.10 "0010",0x0D, 0x0a

Main u-com Version "@VER_MAIN?", 0x0D Ver 1.00 "0100",0x0D, 0x0a

Gui Version "@VER_GUI?", 0x0D Ver 1.00 "0100",0x0D, 0x0a

Lamp Life "@LAMPLIFE?",0x0D Lamp Life

100hour "@LAMPLIFE/00000064",

0x0D, 0x0a

Total Lamp Life "@TOTALLIFE?", 0x0D Total Lamp Life

2000hour "@TOTALLIFE/000007d0

",0x0D, 0x0a

Standby "@STBY",0x0D, 0x0a

Wait "@WAIT",0x0D, 0x0a

Power On "@PWON",0x0D, 0x0a

Cooling "@COOL",0x0D, 0x0a

VP Status "@POW?", 0x0D

Error "@EROR",0x0D, 0x0a

RS232C Control Specification for VP-12S3

It is asked for frequency by the following formulas from the return value of V Sync. In addition, since

return value is Hex, be careful.

][

10288.12 8

Hzfrequency

valuereturn

Build Number expresses the thing of a sub microcomputer.

Boot Program Version number the thing of a sub microcomputer.

Firmware Program Version number the thing of a sub microcomputer.

・

Otros manuales de Proyector de Marantz

Marantz

Marantz VP8600 Manual de usuario

Marantz

Marantz VP-12S1 Manual de usuario

Marantz

Marantz VP-12S4 Manual de usuario

Marantz

Marantz VP15S1 SERIES Manual de usuario

Marantz

Marantz VP-12S4 Manual de usuario

Marantz

Marantz VP8600BL Manual de usuario

Marantz

Marantz VP15S1 SERIES Manual de usuario

Marantz

Marantz VP-12S1s Manual de usuario

Marantz

Marantz VP8100 Manual de usuario

Marantz

Marantz VP15S1 SERIES Manual de usuario

Marantz

Marantz VP-11S2 Manual de usuario

Marantz

Marantz VP-11S1 Manual de usuario

Marantz

Marantz VP4001 Manual de usuario

Marantz

Marantz VP-12S3L Guía de instalación

Marantz

Marantz VP8600 Manual de usuario

Marantz

Marantz VP-11S1 Manual de usuario

Marantz

Marantz VP-10S1 Manual de usuario

Marantz

Marantz VP-11S1 Manual de usuario

Marantz

Marantz VP15S1 SERIES Manual de instrucciones

Marantz

Marantz VP4001 Manual de usuario

Marantz

Marantz VP15S1 SERIES Manual de usuario

Marantz

Marantz VP-12S1 Manual de usuario

Marantz

Marantz VP-11S2 Manual de usuario

Marantz

Marantz DLPTM VP-12S3/VP-12S3L Manual de usuario

Manuales populares de Proyector de otras marcas

iEmmet

iEmmet MP-312 Manual de usuario

Epson

Epson VS400 Manual de usuario

Sony

Sony VPL-HS10 Marketing Specifications & Features Manual de usuario

Sony

Sony VPL-HW65ES Manual de servicio

Toshiba

Toshiba TLP-791U Manual de usuario

Philips

Philips LC1341 Guía de referencia

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manual de usuario

NEC

NEC NP600S EDU Manual de usuario

BenQ

BenQ SH753P Manual de usuario

Eiki

Eiki EK-623U series Manual de usuario

Epson

Epson PowerLite Pro Cinema 6020UB Manual de usuario

Epson

Epson PowerLite Home Cinema 705HD Manual de usuario

Christie

Christie LHD700 Manual de usuario

Navitar

Navitar FX Manual de usuario

InFocus

InFocus LitePro 560 Manual de usuario

Sony

Sony SRX-R815P Manual de usuario

Vivitar

Vivitar DP1500 X Manual de usuario

Acer

Acer C20 Series Manual de usuario