GB - 5
High Pressure Cleaner
item-no. 12982
CE This tool is interference-suppressed according to
CE EN 55014 + EN 61000
INSTRUCTION-MANUAL
Before using electric power-tools, please read
and understand the attached safety-instructions
Additional safety-hints for High Pressure cleaner:
The High Pressure Cleaner is used for cleaning
outdoor objects and areas (tools, vehicles, boats,
terraces, fassades, etc.). This product should not be
used for professional use. Vehicles and their engines
may only be cleaned at locations, which are
equipped with appropriate oil-separator.
•Unit is intended for outdoor-use only!
•Before starting your work, you have to check the
power-cable and the pressure-hose carefully for
damages. A damaged power-cable has to be
replaced by an authorized customer service. A
damaged pressure-hose has to be replaced by
the user. Only use original spare-parts,
•Never touch the mains plug with wet hands.
•Only use splash-protected extension-cables and
pay attention, that the connection does not lie in
the water.
•All connecting hoses must have properly sealed
joints.
•Make sure, that neither the water-supply hose
nor the pressure-hose are not kinked.
•Never direct the water jet at people, animals,
electric components or the cleaner itself.
•Vehicle tyres and tyre valves may only be
cleaned from a minimum distance of 30 cm.
•Never draw-in solvent-containing liquids,
undiluted acids or solvents (petrol paint-thinners,
heating oil, etc.) RISK OF EXPLOSION!
•When using any detergents, comply with the
application, disposal- and warning- instructions of
the detergent manufacturer.
•No objects must be sprayed containing
substances, which are hazardous for your health
(e.g. asbestos).
•The High Pressure Cleaner must not be operated
by children or juveniles.
Discription
1. Main switch (I=ON / 0=OFF)
2. Water connection with filter
3. Hose coupling
4. High pressure outlet
5. High pressure hose
6. Spay gun
7. Safety lock
8. Spray lance
9. Detergent nozzle with bottle
10. Power cable
11. Cleaning needle
Technical specifications
Voltage 230 V~/ 50 Hz
Rated power 1400 W
Supply tempearture max. 40° C
Supply volume, min. 5 l/min
Supply pressure, max. 5 bar
Operating pressure, max. 150 bar
Flow rate 5,3 l/min
Sound pressure level (LPA) 82,3 dB(A)
Sound power Level (LWA) < 85 dB(A)
Vibration 1,6 m/s²
Protection class / II / IPX5
Always wear ear-protection, when machine in use!
Automatic Motor Stop
This High pressure cleaner is equipped with an
automatic motor-stop. As soon as the trigger of the
spray-gun is released during operation, the motor will
stop immediately. When pulling the trigger again, the
motor will re-start. During breaks in work, the trigger
has to be locked by the safety-lock, in order to avoid
accidentally start of the motor. For longer breaks (> 5
min.) the main switch has to be pushed OFF (= "0")
Before use
•Fasten the pressure-hose to the high-pressure
outlet.
•Fasten the water-supply hose to the water
connection or connect with the hose-coupling. Be
sure the filter is mounted correctly.
•Screw the spray-lance into the spray-gun.
•Insert the plug into a sufficiently grounded outlet.
•Turn open the water-supply. When working with
the high-pressure-cleaner with closed or inter-
rupted water-supply, the motor may be damaged.
Operation
•Press "I" (= ON) on the main-switch.
•Let the spray-lance show in the direction to the
ground.
•Release the safety-lock of the spray-gun and
press trigger completely.
