Malem MO25 Blue-T Alarm
iOS/i PHONE Setup and Operation
Installation and Setup
e) Set the ON/OFF switch to OFF
f) The password Input window
appears
g) Enter the password and touch
DONEtoconrm
h) Password successfully cancelled
i) Touch RETURN to go back to
the main menu
16 17
Operation
a) Touch the MALEM ALARM short
cut icon on the iPhone desktop
b) Power ON the alarm switch
under the water resistant cover
c) Wait until the alarm links up with
the App and the main menu is
activated
d) Set the MALEM ALARM App to
ON as in link up procedures
e) Don’t not close the App or lock
the phone when using the alarm
(See important notice on
page 21)
f) Clip the alarm to the top of
the underpants and the
Easy-Clip sensor to the
appropriate position on the
outside of the underwear
g) The Alarm will activate the
App when wetness is detected
h) The iPhone alarm will sound.
Touch STOP to silence.
i) After the alarm sounds, the
iPhone will display the number to
dial and waits until the user
touches “Call”
j) The App will also dial second
and third telephone numbers if
selected and touched by the user.
k) The alarm will not re-activate if
the Easy-Clip sensor is wet
l) The alarm will be activated after
10 minutes once the sensor is dry
m) If the alarm and App become
disconnected, the alarm will
sound and a pop-up window
showing “Scanning BLE……”
will appear on the screen
