Malatech AMMOLITE Manual de usuario
SOLAR SECURITY SMART CAMERA
AMMOLITE / IOLITE
USER MANUAL
MANUFACTURER/IMPORTER:
MALATECH WATER, LTD.
1/E Vanyi way, Alsonemedi,
2351 Hungary
+36 30 377 8089
info@malatechsolar.com
Solar panel: 3 W Monocrystalline Silicone solar panel
with 3 m cable
Li-battery: Panasonic 10 Ah Lithium battery
Charging methods: By solar energy or USB cable
Charging time:
Discharged battery can be charged in 18
hours by solar panel, and in 12-15 hours by
USB cable (assuming the camera is not in
use during charging)
Discharging time with 1 full-charge:
Up to 100 days (depending on use), all-year
with ecient solar re-charging (depending
on use)
Battery stand-by time: 6 months
Expected battery lifetime: > 500 cycles
Image sensor: 1/3*2 MP CMOS sensor
Chip set: Hi3518EV300
Lens: 3.2 mm at F1.6
Visual angle: 120 degrees
IR compensation: up to 30 m
Microphone: Built-in 38 dB microphone with 5 m eective
distance
Speaker: Built-in speaker (2 W, 8 Ω)
On-board storage:
External up to 128 GB micro SD card
supported (SD card is not the part of the
package)
Cloud storage: Available (paid service)
Connection mode: Wi-Fi (802.1 b/g/n at 2.4 GHz)
Transmission distance: Outdoor: 100 m, Indoor: 50 m (depending
on environment & obstacles)
Antenna: 5 dbi
Motion detection method: Human body infrared induction
PIR sensing distance: Up to 8 m
Time delay: 5 seconds
Power consumption:
At standby mode: 200 uAh, daytime
operation: 130 mAh, night operation:
400 mAh
Monitoring options: By pressing the button on the device / by
motion detection / by Remote Live View
Application for smart phones &
tablets: TUYA Smart for iOS and Android systems
Smart home support: Google Home, Amazon Alexa (paid services)
Waterproof IP rating: IP66
Warranty period: 1 year
Product weight: 900 g
Product size: 212X90X70mm
Product box length: 217 mm
Product box width: 135 mm
Product box height: 127 mm
Solar panel: 2 W Monocrystalline Silicone
solar panel
Li-battery: Panasonic NCR 18650B 3.4 Ah*2 pcs (Li-ion)
Charging methods: By solar energy or USB cable
Charging time:
Discharged battery can be charged in 20
hours by solar panel, and in 12-15 hours by
USB cable (assuming the camera is not in use
during charging)
Discharging time with 1 full-
charge:
Up to 90 days (depending on use), all-year
with ecient solar re-charging (depending
on use)
Battery stand-by time: 6 months
Expected battery lifetime: > 500 cycles
Image sensor: 1/3*2 MP CMOS sensor
Chip set: HI3518EV300
Lens: 3.2 mm at F1.6
Visual angle: 120 degrees
IR compensation: up to 30 m
Microphone: Built-in 38 dB microphone with 5 m eective
distance
Speaker: Built-in speaker (2 W, 8 Ω)
On-board storage:
External up to 128 GB micro SD card
supported (SD card is not the part of the
package)
Cloud storage: Available (paid service)
Connection mode: Wi-Fi (802.1 b/g/n at 2.4 GHz)
Transmission distance: Outdoor: 100 m, Indoor: 50 m (depending on
environment & obstacles)
Antenna: 5 dbi
Motion detection method: Human body infrared induction
PIR sensing distance: Up to 8m
Time delay: 5 seconds
Power consumption:
At standby mode: 200 uAh, daytime
operation: 130 mAh, night operation: 400
mAh
Monitoring options: By pressing the button on the device / by
motion detection / by Remote Live View
Application for smart phones
& tablets: TUYA Smart for iOS and Android systems
Smart home support: Google Home, Amazon Alexa (paid services)
Waterproof IP rating: IP65
Warranty period: 1 year
Product weight: 800 g
Product size: 210X135X67 mm
Product box length: 220 mm
Product box width: 154 mm
Product box height: 113 mm
AMMOLITE
2
Solar panel: 2 W Monocrystalline Silicone
solar panel
Li-battery: Panasonic NCR 18650B 3.4 Ah*2 pcs (Li-ion)
Charging methods: By solar energy or USB cable
Charging time:
Discharged battery can be charged in 20
hours by solar panel, and in 12-15 hours by
USB cable (assuming the camera is not in use
during charging)
Discharging time with 1 full-
charge:
Up to 90 days (depending on use), all-year
with ecient solar re-charging (depending
on use)
Battery stand-by time: 6 months
Expected battery lifetime: > 500 cycles
Image sensor: 1/3*2 MP CMOS sensor
Chip set: HI3518EV300
Lens: 3.2 mm at F1.6
Visual angle: 120 degrees
IR compensation: up to 30 m
Microphone: Built-in 38 dB microphone with 5 m eective
distance
Speaker: Built-in speaker (2 W, 8 Ω)
On-board storage:
External up to 128 GB micro SD card
supported (SD card is not the part of the
package)
Cloud storage: Available (paid service)
Connection mode: Wi-Fi (802.1 b/g/n at 2.4 GHz)
Transmission distance: Outdoor: 100 m, Indoor: 50 m (depending on
environment & obstacles)
Antenna: 5 dbi
Motion detection method: Human body infrared induction
PIR sensing distance: Up to 8m
Time delay: 5 seconds
Power consumption:
At standby mode: 200 uAh, daytime
operation: 130 mAh, night operation: 400
mAh
Monitoring options: By pressing the button on the device / by
motion detection / by Remote Live View
Application for smart phones
& tablets: TUYA Smart for iOS and Android systems
Smart home support: Google Home, Amazon Alexa (paid services)
Waterproof IP rating: IP65
Warranty period: 1 year
Product weight: 800 g
Product size: 210X135X67 mm
Product box length: 220 mm
Product box width: 154 mm
Product box height: 113 mm
IOLITE
3
CAMERA STRUCTURE, CONTENT OF THE BOX
ATTENTION! IF YOU INTEND TO CHANGE YOUR SMARTPHONE OR
TABLET, PLEASE DO NOT FORGET TO REMOVE YOUR CAMERA(S) FROM
THE APPLICATION ON YOUR OLD DEVICE/ PLEASE READ THIS MANUAL
CAREFULLY, YOU FIND DETAILED DESCRIPTION ABOUT HOW TO REMOVE
YOUR DEVICES FROM THE APP BELOW!
ATTENTION! The life span of the battery depends on you as well! Please
use the camera correctly as described in this manual. If you intend to use
the solar panel eciently for recharging the battery, install the camera
in a sunny place where sucient sunlight is provided for charging the
battery every day. Adjust the solar panel’s vertical angle correctly (ideal
is app. 45 degrees), horizontally it should face towards the midday sun.
Please pay attention to place your camera in a non-shaded place with
sucient sunshine provided for the solar panel operating eciently.
If you prefer to charge the camera battery by grid power with the USB
cable, please care about charging your camera when the battery level
runs low.
If you intend to turn o your camera, and you do not want to use it for a
while, please make sure that the battery has sucient charge, and it is
not totally discharged. If you would like to store the camera instead of
using it, please turn o the camera with the ON/OFF button. In case of
a longer storage, please turn on the camera once every month, and full-
charge the battery. It may decrease the life span of the battery if the
camera is stored for a longer period with a totally discharged battery,
moreover it can damage the battery!
4
CAMERA STRUCTURE, CONTENT OF THE BOX
Content of the box:
Iolite:
1. Iolite solar smart camera
2. Mounting template
3. Screwdriver
4. USB cable
5. Li-ion batteries (2 pcs)
6. Screws, anchors
Ammolite:
1. Ammolite solar smart camera
2. Solar panel
3. Screwdriver
4. USB cable
5. Li-ion battery (1 pc)
6. Screws, anchors
1 1
2 2
4 4
3 3
5 5
6 6
5
Solar panel
5 dbi antenna
Metal housing
Indicator lights (red: power, blue:
record, green: battery charging)
Vertical adjustment (120 deg)
Horizontal adjustment (355 deg)
Microphone
HD lens
PIR motion sensor
Night vision
Camera structure:
ATTENTION! Both Ammolite, and Iolite camera series are produced with
2 type of housing depending on market (HF-S4, HF-S5). Images below
show the structure of the Iolite cameras with the 2 housing types. In
case of Ammolite the dierence is that the solar panel is not integrated,
but supplied as a separate item, and can be connected to the camera by
a cable with a plug.
HF-S4 housing:
Reset button
Speaker
ON/OFF button
DC 5V port
Micro-SD card slot
BOTTOM OF
THE CAMERA
CAMERA STRUCTURE, CONTENT OF THE BOX
6
Solar panel
5 dbi antenna
Metal
housing
Indicator lights
(red: power,
blue: record,
green: battery charging)
Vertical adjustment (120 deg)
Horizontal adjustment (355 deg)
Microphone
HD lens
PIR motion sensor
Night vision
HF-S5 housing:
Reset button
Speaker
ON/OFF button
DC 5V port Micro-SD card slot
BOTT OM OF THE CAMERA
CAMERA STRUCTURE, CONTENT OF THE BOX
7
HF-S4 HF-S5
USER INSTRUCTIONS
First use - Start-up of the camera:
1. Remove the bottom cover of the camera by removing the screws with
the screwdriver.
2. Insert the Micro-SD card correctly in the slot (ATTENTION! The Micro-SD
card is not the part of the package! The camera supports Micro-SD cards
up to 128 GB storage space)
3. Press the ON/OFF button for 2-3 seconds.
4. Red indicator light shows that the operation has been executed
successfully.
12
4
3
8
HF-S5
HF-S4
USER INSTRUCTIONS
Battery charging:
ATTENTION! Full-charge the battery before rst use by grid power using
the supplied USB cable! Full-charge will require 10-18 hours! The green
indicator light shows that the battery is charging.
Restoring factory settings:
In case your camera does not connect to your smartphone or tablet, or
you would like to connect it to a new router, restoring the factory settings
can be a quick solution.
1. If you see the blue indicator light ashing, please turn OFF, and turn
ON the camera.
2. Right after, keep pressing the RESET button (for app. 5 seconds) until you
hear a sound which means that the factory settings have been restored.
Following a successful operation, the red indicator light shines again.
1
MUST DO
HF-S5
HF-S4
2
9
Downloading the application:
Search for Tuya Smart app in App Store or Google Play. Download it to your
device, and install the application on your device.
Pair your device:
Before downloading and installing the application please check whether
your smartphone or tablet is connected to your Wi-Fi system.
1. Open “Tuya Smart ” App Register and tap +
2. Tap Video Surveillance then Smart Camera
3. Tap on “next step”
4. Select your router, enter your password then tap “Conrm”
ATTENTION! Only 2.4 GHz is supported in case of routers!
1 2 3 4
USER INSTRUCTIONS
10
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cámara de seguridad de Malatech
