Makita LD050P Manual de usuario

Makita LD050P 1

Table of Contents

Instrument Set-up- - - - - - - - - - - - - - - - - - - - - - -2

Introduction- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2

Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2

Display - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3

Insert batteries - - - - - - - - - - - - - - - - - - - - - - - - - - - -3

Operations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4

Switching ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - -4

Clear - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4

Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - -4

Adjusting measuring reference - - - - - - - - - - - - - - - - -4

Distance unit setting - - - - - - - - - - - - - - - - - - - - - - - - 4

Measuring Functions - - - - - - - - - - - - - - - - - - -5

Measuring single distance - - - - - - - - - - - - - - - - - - - -5

Permament measuring- - - - - - - - - - - - - - - - - - - - - - -5

Add / Subtract - - - - - - - - - - - - - - - - - - - - - - - - - - - - -5

Area- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -6

Volume- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -6

Pythagoras (2-point) - - - - - - - - - - - - - - - - - - - - - - - -7

Pythagoras (3-point) - - - - - - - - - - - - - - - - - - - - - - - -7

Memory (5 last results) - - - - - - - - - - - - - - - - - - - - - -8

Technical Data - - - - - - - - - - - - - - - - - - - - - - - - - -9

Message Codes - - - - - - - - - - - - - - - - - - - - - - - - 10

Care- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10

Safety Instructions - - - - - - - - - - - - - - - - - - - - - 10

Areas of responsibility - - - - - - - - - - - - - - - - - - - - - - 10

Permitted use - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11

Prohibited use- - - - - - - - - - - - - - - - - - - - - - - - - - - - 11

Hazards in use - - - - - - - - - - - - - - - - - - - - - - - - - - - 11

Limits of use - - - - - - - - - - - - - - - - - - - - - - - - - - - - -11

Disposal - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -11

Electromagnetic Compatibility (EMC)- - - - - - - - - - - -11

FCC statement (applicable in U.S.) - - - - - - - - - - - - -12

Laser classification- - - - - - - - - - - - - - - - - - - - - - - - -12

Labelling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -12

Makita LD050P

Instrument Set-up

Introduction

The safety instructions and the user manual should be

read through carefully before the product is used for the

first time.

The person responsible for the product must ensure that

all users understand these directions and adhere to them.

The symbols used have the following meanings:

WARNING

Indicates a potentially hazardous situation or an unintended use

which, if not avoided, will result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation or an unintended use

which, if not avoided, may result in minor injury and/or appreci-

able material, financial and environmental damage.

Important paragraphs which must be adhered to in practice

as they enable the product to be used in a technically

correct and efficient manner.

Overview

Display

On / Measure

Area /

Volume /

Pythagoras/

Memory

Clear / Off

Add /

Subtract

Measuring

reference /

Unit

Makita LD050P

Instrument Set-up

Display

Battery

Units

Area /

Volume

Min/Max

Measuring

reference

Info

Addition /

Subtraction

Pythagoras

Memory

Main line

Insert batteries

To ensure a reli-

able use, do not

use zinc-carbon

batteries.

Change batter-

ies when battery

symbol is flash-

ing.

Makita LD050P

Operations

Switching ON/OFF Clear Message Codes

2 sec

Device is

turned OFF.

Undo last action.

If the info icon appears with a

number, observe the instruc-

tions in section "Message

Codes".

Example:

Adjusting measuring reference

Distance is measured from the

front of the device.

Distance is measured from the rear

of the device (standard setting).

Distance unit setting

0.000m

0.00m

0.00ft

0‘00‘‘ 1/16

0.00in

0 1/16in

Switch between the

following units:

2 sec

Makita LD050P 5

Measuring Functions

Measuring single distance

Aim active laser at target.

8.532 m

Target surfaces: Measuring

errors can occur when meas-

uring to colourless liquids,

glass, styrofoam or semi-per-

meable surfaces or when

aiming at high gloss surfac-

es. Against dark surfaces the

measuring time increases.

Permament measuring

2 sec

8.532 m

Aim active laser at target.

The last value mea-

sured is displayed.

Stops permanent measur-

ing.

Add / Subtract

7.332 m

The next meas-

urement is added

to the previous

one.

1x 2x

The next meas-

urement is sub-

tracted from the

previous one.

5.515 m

12.847 m

The result is shown in the

main line and the measured

value above. This process

can be repeated as required.

The same process can be

used for adding or subtracting

areas or volumes.

Makita LD050P

Measuring Functions

Area

Aim laser at first

target point.

Aim laser at sec-

ond target point.

24.352 m

The result is shown in the

main line and the measured

value above.

Volume

Aim laser at first

target point.

Aim laser at sec-

ond target point.

Aim laser at third

target point.

78.694 m

The result is

shown in the

main line and

the measured

value above.

Makita LD050P

Measuring Functions

Pythagoras (2-point)

Aim laser at up-

per point.

Aim laser rectan-

gular at lower

point.

8.294 m

The result is shown

in the main line and

the measured dis-

tance above.

Pressing the meas-

uring key for 2 sec

in the function acti-

vates automatically

Minimum or Maxi-

mum measure-

ment.

Pythagoras (3-point)

Aim laser at up-

per point.

Aim laser at rec-

tangular point.

Aim laser at lower point.

8.294 m

The result is shown in the main

line and the measured distance

above.

Pressing the measuring key for 2

sec in the function activates auto-

matically Minimum or Maximum

measurement.

Makita LD050P

Measuring Functions

Memory (5 last results)

8.294 m

5 last results are

displayed.

8.294 m

Navigates trough

5 last results.

Makita LD050P 9

Technical Data

* favourable conditions are: white and diffuse

reflecting target (white painted wall), low background

illumination and moderate temperatures.

** unfavourable conditions are: targets with lower or

higher reflectivity or high background illumination or

temperatures at the upper or lower end of the speci-

fied temperature range.

*** Tolerances apply from 0.05 m to 10 m with a confi-

dence level of 95%.

With favourable conditions the tolerance may deterio-

rate by 0.10 mm/m for distances between 10 m to

30 m and by 0.15 mm/m for distances above 30 m.

With unfavourable conditions the tolerance may dete-

riorate by 0.15 mm/m for distances between 10 m to

30 m and by 0.20 mm/m for distances above 30 m.

Distance measurement (ISO 16331-1)

Accuracy with favourable

conditions *

± 2.0 mm / 0.08 in ***

Accuracy with unfavourable

conditions **

± 3.0 mm / 0.12 in ***

Range with favourable

conditions *

50 m / 164 ft

Range with unfavourable

conditions **

35 m / 115 ft

Smallest unit displayed 1 mm / 1/16 in

Ø laser point

at distances

6 / 30 mm

(10 / 50 m)

General

Laser class 2

Laser type 635 nm, < 1 mW

Protection class IP54 (dust- and splash

water protected)

Autom. laser switch off after 90 s

Autom. power switch-off after 180 s

Battery durability (2 x AAA) up to 5000 measure-

ments

Dimension (H x D x W) 116 x 45 x 29 mm

4.57 x 1.77 x 1.14 in

Weight (with batteries) 0.10 kg / 3.527 oz

Temperature range:

- Storage

- Operation

-25 to 70 °C

-13 to 158 °F

0 to 40 °C

32 to 104 °F

Functions

Distance measuring yes

Min/Max measuring yes

Permanent measuring yes

Addition/Subtraction yes

Area yes

Volume yes

Pythagoras 2-point, 3-point

Memory 5 results

Makita LD050P

Message Codes

If the message Error does not disappear

after switching on the device repeatedly,

contact the dealer.

If the message InFo appears with a

number, press the Clear button and

observe the following instructions:

Care

•Clean the device with a damp, soft cloth.

•Never immerse the device in water.

•Never use aggressive cleaning agents

or solvents.

Safety Instructions

The person responsible for the instrument

must ensure that all users understand

these directions and adhere to them.

Areas of responsibility

Responsibilities of the manufacturer

of the original equipment:

Makita Corporation Anjo,

Aichi 446-8502 Japan /

Makita, Jan-Baptist Vinkstraat 2, 3070,

Belgium

Internet: www.makita.com

The company above is responsible for

supplying the product, including the User

Manual in a completely safe condition.

The company above is not responsible for

third party accessories.

Responsibilities of the person in

charge of the instrument:

•To understand the safety instructions on

the product and the instructions in the

User Manual.

•To be familiar with local safety regula-

tions relating to accident prevention.

•Always prevent access to the product by

unauthorised personnel.

No. Cause Correction

204 Calculation error Perform measurement

again.

252 Temperature too

high

Let device cool down.

253 Temperature too

low

Warm device up.

255 Received signal too

weak, measuring

time too long

Change target surface

(e.g. white paper).

256 Received signal too

high

Change target surface

(e.g. white paper).

257 Too much back-

ground light

Shadow target area.

258 Measurement

outside of meas-

uring range

Correct range.

260 Laser beam inter-

rupted

Repeat measurement.

Tabla de contenidos

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario