Making Memories Slice Manual de usuario
3
ENGLISH
CONTENTS
License Agreement 4
Safety Information 7
Package Contents 8
Slice™ Unit Diagram 9
Basic Operations
Charging the Slice™ 10
Prepping the cutting mat 10
Positioning the paper 11
Turning on the Slice™ 11
Inserting the design card 12
Homing the blade (for initial use) 13
Selecting the design 14
Cutting the design 15
Removing the paper design 15
Basic Care
Replacing blades 16
Cleaning the Slice™ unit 18
Care and cleaning of the glass cutting mat 18
Additional tips 18
Frequently Asked Questions 19
Troubleshooting
Issue: The Slice™ unit is not cutting all the way through paper 20
Issue: The design cut is distorted 20
Issue: The Slice™ unit does not turn on 20
Issue: The paper gets wrinkled during cutting process 20
Français 21
Español 39
Deutsch 57
4
ENGLISH
END USER LICENSE AGREEMENT
IMPORTANT—READ CAREFULLY:
MAKING MEMORIES WHOLESALE, INC. (“OWNER”) IS WILLING TO LICENSE THE HARDWARE,
FIRMWARE, SOFTWARE (IN MACHINE READABLE FORM ONLY) AND ANY EMBEDDED CONTENT
OF THE SLICE™ HANDHELD CUTTING SYSTEM (THE “LICENSED PRODUCTS”) TO YOU ONLY
UPON THE CONDITION THAT YOU ACCEPT ALL OF THE TERMS AND CONDITIONS CONTAINED
IN THIS END USER LICENSE AGREEMENT (THE “AGREEMENT”). YOU SHOULD CAREFULLY READ
THE FOLLOWING TERMS AND CONDITIONS BEFORE USING ANY OF THE LICENSED PRODUCTS.
USING ANY OF THE LICENSED PRODUCTS MEANS YOU ACCEPT THESE TERMS AND
CONDITIONS AND UNDERSTAND THAT THEY WILL BE LEGALLY BINDING ON YOU AND ANY
END USER. IF YOU DO NOT AGREE WITH THESE TERMS AND CONDITIONS, OR DO NOT WANT
THEM TO BE BINDING ON YOU, YOU SHOULD PROMPTLY CONTACT OWNER AT 1-800-286-5263
FOR INSTRUCTIONS ON HOW TO RETURN THE UNUSED LICENSED PRODUCTS.
1. License. Subject to the terms of this Agreement and payment of the applicable license fee, which is a
percentage of the price paid by you for the Licensed Products, Owner hereby grants you a limited,
nonexclusive, personal, and nontransferable license for use of the Licensed Products. A separate license
is required for each additional user of the Licensed Products.
2. Confidentiality and Limitations of Use.
2.1 The Licensed Products constitute trade secrets and confidential information of Owner and its licensors.
The foregoing license is for non-business purposes only and ends upon termination of this Agreement. Upon
termination of this Agreement, you shall discontinue use of the Licensed Products and return them to Owner.
2.2 Except as expressly set forth in this Agreement, you may not under any circumstances (1) copy the
Licensed Products; (2) sublicense, distribute, modify, adapt, translate, reverse engineer, decompile,
disassemble, or prepare derivative works, as applicable, based upon the Licensed Products; (3) use or
allow use of the Licensed Products after the termination or expiration of this Agreement (except pursuant
to another valid license); (4) allow others to use, copy, or access the Licensed Products; (5) access, use,
or disclose the Software source code; (6) remove or alter any copyright, patent or other proprietary rights
notices included in or affixed to the Licensed Products; (7) sell, license, disclose, or distribute any product
designed or intended for use with the Licensed Products; or (8) use the Licensed Products in applications
or systems when performance of the Licensed Products or failure of the Licensed Products to perform could
reasonably be expected to result in serious physical injury, loss of life, or material damage to property.
2.3 You may permanently transfer all of your rights under this Agreement only as part of a sale or transfer
of the Licensed Products, provided that you retain no copies of any part or component of the Licensed
Products, you transfer all of the Licensed Products (including all component parts, hardware, software and
upgrades thereof, and documentation), and the recipient agrees to the terms of this Agreement.
3. Ownership.
3.1 The Licensed products are solely owned by Owner and Owner’s licensors. The Licensed Products are
licensed, not sold. The Licensed Products are protected by U.S. and international patent and copyright laws
and treaties, as well as other intellectual property laws and treaties.
5
ENGLISH
3.2 All right, title and interest in the Licensed Products, including any updates or revisions thereto, is and
shall remain the sole and exclusive property of Owner, its licensors, and their successors and assigns.
Other than the limited license explicitly set forth in this Agreement, no interest in or rights or licenses to the
Licensed Products are granted to you, and no interest in or rights or licenses to the Licensed Products shall
inure in or accrue to you, whether by implication, estoppel, or otherwise. All rights of any kind in the Licensed
Products that are not expressly granted in this Agreement are entirely and exclusively reserved to and by
Owner, its licensors, and their successors and assigns.
3.3 No right, title or interest in or to any trademark, service mark, logo or trade name of Owner or its
licensors (“Owner’s Marks”) is granted under this Agreement. You shall not use Owner’s Marks for any
purpose without the express written consent of Owner. Any such authorized use of Owner’s Marks inures
to Owner’s benefit.
4. Updates; Support. Except as provided below, Owner is not obligated to provide any updates, revisions,
new versions, bug fixes, maintenance, or support for the Licensed Products. Any such materials or services
must be obtained pursuant to a separate agreement.
5. Remedies and Limited Warranty. Owner warrants the Licensed Products will conform to the
manufacturer’s specifications and will be free from defects for twelve (12) months following the original
purchase date (the “Warranty Period”) as set forth in Owner’s Statement of Limited Liability, which is
expressly incorporated herein by reference.
6. Term and Termination.
6.1 This Agreement is effective until terminated. Owner may terminate this Agreement immediately without
notice from Owner if you fail to comply with any provision of this Agreement. Either party may terminate this
Agreement immediately should any of the Licensed Products become, or in either party’s opinion be likely
to become, the subject of a claim of infringement of any intellectual property right.
6.2 Upon termination of this Agreement for any reason, you shall immediately cease all use of the Licensed
Products in any form and immediately return all Licensed Products in your possession or control.
6.3 Except as otherwise stated herein, any provisions in this Agreement that by their sense and context are
intended to survive the termination of this Agreement shall survive such termination. Notwithstanding the
foregoing, any cause of action that Owner may have against you for breach of this Agreement before the
date of termination shall survive such termination.
7. Export Laws. The Licensed Products are subject to U.S. export control laws and may be subject to export
or import regulations in other countries. You agree to comply strictly with all such laws and regulations in
other countries. You agree to comply strictly with all such laws and regulations and acknowledge that you
have the responsibility to obtain such licenses to export, re-export, or import as may be required after delivery
to you.
8. U.S. Government Restricted Rights. The Licensed Products are “commercial items”, as that term is
defined at 48 C.F.R. § 2.101, consisting of “commercial computer software” and “commercial computer
software documentation,” as such terms are used in 48 C.F.R. § 12.212 or 48 C.F.R. § 227.7202, as
applicable. Consistent with 48 C.F.R. § 12.212 or 48 C.F.R. §§ 227.7202-1 through 227.7202-4, as
applicable, the commercial computer software and commercial computer’s software documentation are
licensed to U.S. government end users (1) only as commercial items and (2) with only the same rights as
are granted to all other end users pursuant to the terms and conditions set forth in this Agreement.
Unpublished rights are reserved under the copyright laws of the United States.
END USER LICENSE AGREEMENT
6
ENGLISH
9. General.
9.1 Waiver. No waiver of any violation or nonperformance of this Agreement in one instance shall be deemed
to be a waiver of any subsequent violation or nonperformance. All waivers must be in writing.
9.2 Severability. If any term or provision of this Agreement is to any extent held invalid, illegal, or unenforceable
by any court of competent jurisdiction, the remainder of this Agreement shall not be affected thereby, and each
term and provision of this Agreement shall be valid and enforced to the fullest extent permitted by law.
9.3 Notice. Any notice or report hereunder shall be deemed given if delivered or sent by first-class mail,
postage prepaid, addressed to the other party at that party’s current address, or at such other address as
designated by the party by written notice. If notice is given by mail and the notice affects other parties’ rights
hereunder, the effective date of the notice shall be seven (7) days after the date of mailing or the date the
notice is received, whichever is earlier.
9.4 Applicable Law; Disputes. This Agreement shall be governed by and construed in accordance with the
laws of the state of Utah without regard to the Utah conflict-of- laws principles. The parties expressly disclaim
the United Nations Convention on Contracts for the International Sale of Goods, and the provisions thereof
will not govern this Agreement. The parties agree that any claim asserted in any legal proceeding by one party
against the other shall be commenced and maintained exclusively in state or federal court located within Salt
Lake County, Utah. Both parties hereby submit to the jurisdiction of such courts over each of them personally
in connection with such litigation, and waive any objection to venue in such courts and any claim that such
forum is an inconvenient forum.
9.5 Injunctive and Other Equitable Relief. You agree that the remedy at law for any breach or threatened
breach of this Agreement by you would, by its nature, be inadequate, and that in such case Owner shall be
entitled, in addition to damages, to a restraining order, temporary and permanent injunctive relief, specific
performance, and other appropriate equitable relief, without showing or providing that any monetary damage
has been sustained.
9.6 Entire Agreement. This Agreement and Owner’s Statement of Limited Warranty are the entire agreement
between the parties with respect to the subject matter hereof. It supersedes all prior or contemporaneous
agreements, understandings, or representations with respect to the Licensed Products. This Agreement may
not be modified or amended except in writing signed by both parties. Any preprinted terms on your purchase
order are expressly rejected by Owner and shall be given no force or effect.
YOU HEREBY ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT AND
AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS.
END USER LICENSE AGREEMENT
7
ENGLISH
Safety Information
Always follow basic safety precautions when using this product to reduce risk of injury.
1. Read all instructions that come with the unit.
2. Use only a grounded electrical outlet when connecting this product to a power source.
If you do not know whether the outlet is grounded, check with a qualified electrician.
3. Use only the power cord provided with the unit.
4. Unplug the unit from electrical outlets before cleaning.
5. Do not replace blades while the unit is plugged in or turned on.
6. Do not remove or replace unit blades with your fingers.
7. To avoid choking hazards, keep replacement blades out of reach of children.
8. Do not use this unit near water or when you are wet.
9. Use the unit in a safe location where no one can step on it, or trip over
the electrical cord if it is charging.
10. If you have trouble operating the unit, see “Troubleshooting.”
11. Do not remove battery cover.
m WARNING
Use only authorized Making Memories®Slice™ Design Cards.
Use of unauthorized cards may disable Slice™ unit.
8
ENGLISH
PACKAGE CONTENTS
1 Slice™ Cordless Design Cutter™
2 6 x 6 tempered glass cutting mat
3 Power cord
4 Repositionable adhesive
5 Foam brush
6 5 replacement blades w/ blade replacement tool
7 Blade adjustment wrench
8 Basics 1 Design Card
9 Basics 1 Design Card Booklet
10 User manual
0
1
01234
0
1
12345
1 2 3 4 5
1
2
3
4 5 6 7
CO R D L E S S DE S I G N CU T T E R ™
U s e r M a n u a l
en g l i s h | f r a n ç a i s | e s p a ñ o l | d e u t s c h
M a n u e l d ’ U t i l i s a t e u r
M a n u a l d e U s u a r i o
B e d i e n u n g s a n l e i t u n g
8
9 10
en g l i s h | f r a n ç a i s | e s p a ñ o l | d e u t s c h
B A SICS 1
design card booklet
livret de cartes dessin
folleto de la tarjeta de diseño
design broschüret
9
ENGLISH
SLICE™ UNIT DIAGRAM
0
1
2
3
4
0
1
3
2
0
1
4
4
4
FRONT
BACK
handle
start button
ruled base
screen
keypad
design card slot
power button battery cover
(do not remove)
power cord port
base cover
10
ENGLISH
BASIC OPERATIONS
STEP 1
Charging the Slice™
To charge the Slice™ Cordless Design Cutter™:
1. Plug the power adapter into the Slice™, as shown below.
2. Plug the power cord into a grounded electrical outlet.
3. Leave the Slice™ plugged in for approximately 1 hour to fully charge it.
Note: You can also use the Slice™ while it is plugged in, if desired.
3
STEP 2
Prepping the cutting mat
To prep the cutting mat:
1. Apply a line of repositionable adhesive on one end of the glass mat.
2. Spread thin coat evenly across the glass mat with a foam brush, until it coats
the mat completely, as shown below.
3. Allow the adhesive to dry for at least 2 minutes.
Note: The adhesive remains white while it is wet and becomes clear once it is dry.
Note: Make sure the adhesive has dried properly before placing the paper on the cutting mat.
Tip: Before applying a new coat of repositionable adhesive, ensure the mat is clean and old
adhesive has been removed (see Basic Care p.18).
Step 1 Step 2
11
ENGLISH
BASIC OPERATIONS
SELECT
MENU
Please
Insert
Design
Card
STEP 3
Positioning the paper
To position the paper on the mat:
1. Place the paper directly on the cutting mat after the adhesive has dried.
2. Make sure the desired side of paper is facing up.
3. Gently smooth the paper across the cutting mat with your hand
or with the Slice™ Brayer (sold separately).
4. Make sure the paper is completely flat.
STEP 4
Turning on the Slice™
To turn on the Slice™ design cutter:
1. Push small button on back panel as shown below.
2. The Slice™ screen illuminates on the top of the unit as shown below.
3. Remove the protective cover from the base.
Note: The unit shuts off automatically after approximately 15 minutes when not in use,
whether it is plugged in or not.
Step 4 #1 Step 4 #2
12
ENGLISH
BASIC OPERATIONS
STEP 5
Inserting the design card
To insert the design card:
1. Insert the card with the label-side up into the back slot of the unit. The side of the card
with the notched corner should slide into the slot first, as shown below.
2. The card clicks when inserted properly. The menu screen also changes to display
the Slice™ logo, as shown below.
3. To remove the design card, push it in and allow it to pop out automatically.
SELECT
MENU
by
Tinnus T e chnology
powered by
2
1 1
Tabla de contenidos
Manuales populares de Cortador de otras marcas
Milwaukee
Milwaukee HEAVY DUTY M12 FCOT Manual de usuario
Makita
Makita DCS552 Manual de usuario
SignWarehouse.com
SignWarehouse.com Bobcat BA-60 Manual de usuario
Makita
Makita 4112HS Manual de usuario
GEISMAR STUMEC
GEISMAR STUMEC MTZ 350S Manual de usuario
Hitachi
Hitachi CM 4SB2 Guía de solución de problemas
