Major tech MT95 Manual de usuario
MT95
MINI SOUND LEVEL METER
INSTRUCTION MANUAL
1. Safety Information
Read the following safety information carefully before attempting to operate or service the
meter, and please use the meter as specified in this manual.
Environmental conditions
· Altitude below 2000 meters
· Relatively humidity 90% max.
· Operation Ambient 0-40°C
Maintenance & Clearing
· Repairs or servicing not covered in this manual should only be performed by qualified
personnel.
· Periodically wipe the case with a dry cloth. Do not use abrasives or solvents on this
instruments.
2. General Description
This Mini Sound Level Meter is designed to meet the measurement requirements of Noise
engineering, sound quality control, health, industrial safety offices in various environments.
Such as factory, school, office and traffic lines.
· MAX/MIN measurement
· Over range indicate
· Low range indicate
· A & C weighting selection
· Bluetooth communication
4. Button Discription
Power on/off, Auto-power off:
Power on: Press “ ” button to power on, system default auto power off. Hold down the
button to power on and disable auto power off function. Hold the button again to enable the
auto power off function
Power off: Press “ ” button to power off.
Auto-power off: Auto-power off signal " " displays in the left corner of the LCD and the
instrument will auto-power off in 10 minutes of being inactive.
Press the power on/off button for over 1 minute, it will be recognized as faulty operation and
the instrument will auto power off.
3. Meter Description
1 - LCD Display
2 - Body of Meter
3 - Microphone
4 - HOLD/ button
5 - MAX/MIN button
6 - Power on/off button
7 - UNITS button
8 - Bluetooth button
5. Display Layout
: Bluetooth symbol
: Low battery indicate
: Timing power off symbol
MAX: Maximum hold
MIN: Minimum hold
Two smaller digits at upper left of display: Minimum range
Three smaller digits at upper right of display: Maximum range
UNDER: under range
OVER: over range
dBA, dBC: A-weighting, C-weighting
AUTO: Auto range selection
HOLD: Data hold function
Four larger digits in middle of display: Measurement data
Measurement Operation
· Turn on the instrument by pressing power on/off button.
· Press button "RANGE" and select suitable measurement range based on no "UNDER" or
"OVER" display on LCD.
· Select 'dBA' for general noise sound level and 'dBC' for measuring sound level of acoustic
material.
· Hold the instrument in hand or fix it on tripod, take measure at a distance of 1-1.5m
between microphone and source.
Data Hold
Press hold button to freeze the readings and "HOLD" symbol displays LCD. Press hold
button again to return normal measurement.
MAX/MIN reading
· Press MAX/MIN button for the first time, the instrument will enter Max tracking mode,
the tracked max reading will display on the LCD.
· Press MAX/MIN button for the second time, the instrument will enter Min tracking mode,
the tracked min reading will display on the LCD.
· Press MAX/MIN button for the third time, the current reading will display on the LCD.
Bluetooth communication
Download “Meterbox Pro” on iOS & Android devices to use bluetooth feature. Hold the
Bluetooth button to activate Bluetooth function, it communicates after connecting with the
software. The instrument can transmit measured dates and instrument status to software
and the software can control the instrument.
Battery Replacement
The instrument will automatically turn off in order to lengthen the battery working life.
When symbol appears on the LCD. Please replace the old battery with new ones.
· Open the battery compartment with a suitable screwdriver and replace 9V battery.
· Mount the battery compartment again.
RANGE/(A/C) button: Press to switch range gear; hold to switch unit.
button: Hold to activate or deactivate Bluetooth.
HOLD/ if button: Press to hold the current data; hold to activate or deactivate backlight
MAX/MIN button: Press to record Maximum, Minimum
Note: MAX/MIN button, range button and A/C button will be deactivated when hold the
current readings and the instrument will exit MAX/MIN recording function when switch range
gear
Specifications
31.5HZ-8KHZ
Frequency range:
3dB (under reference condition of 94dB, 1kHz)
Accuracy:
A and C
Frequency weighting:
1/2 inch electret condenser microphone
Microphone:
35 - 130dB
Range:
LO: 35dB-80dB Med: 50dB-100dB
HI: 80dB-130dB Auto: 35dB-130dB
Measuring range:
4 digits LCD display with a resolution: 0.1dB
Digital display:
2 times / sec
Display Update:
Meter automatically shuts down after approx. 10 minutes
of inactivity.
Auto power off:
One 9V battery
Power supply:
The low battery signal " " flash when battery voltage
drops below 7.2V;
The backlight and low battery signal " " flash twice IE
battery voltage drops below 6.5V, then auto power off.
Low battery indication:
0°C to 40°C, 10%RH to 90%RH
Operation temperature and humidity:
-10°C to +60°C, 10%RH to75%RH Storage temperature and temperature:
184g
Weight:
185mm x 54mm x 36mm
Dimensions:
6. Notice
ŸDo not store or operate the instrument at high temperature and high humidity environment.
ŸWhen not in use for a long period of time, please take out the battery to avoid battery liquid
leakage in the instrument.
ŸWhen using the instrument outdoors, please mount the background noise absorber on the
microphone in order to not pick up undesirable signals.
ŸKeep microphone dry and avoid severe vibration.
www.major-tech.com www.majortech.com.au
MAJOR TECH (PTY) LTD
South Africa Australia
Tabla de contenidos
Otros manuales de Instrumento de medición de Major tech
Major tech
Major tech MT713 Manual de usuario
Major tech
Major tech MT943 Manual de usuario
Major tech
Major tech MT930 Manual de usuario
Major tech
Major tech MT930 Manual de usuario
Major tech
Major tech MT975 Manual de usuario
Major tech
Major tech MT745 Manual de usuario
Major tech
Major tech MT784 Manual de usuario
Major tech
Major tech MT775 Manual de usuario
Major tech
Major tech MT 770 Manual de usuario
Major tech
Major tech MT91 Manual de usuario
Major tech
Major tech MT123 Manual de usuario
Major tech
Major tech MT775 Manual de usuario
Major tech
Major tech MT740 Manual de usuario
Major tech
Major tech MT785 Manual de usuario
Major tech
Major tech MT960 Manual de usuario
Major tech
Major tech MT730 Manual de usuario
Major tech
Major tech TrueRMS MT765 Manual de usuario
Major tech
Major tech MT940 Manual de usuario
Major tech
Major tech TRUERMS MTD80 Manual de usuario
Major tech
Major tech K2007R Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario