Maestro MR600 Manual de usuario
Сerticated in Ukraine
Виріб сертифіковано в Україні
Model/Модель: MR600
Owners manual. Vacuum cleaner
Руководство по эксплуатации. Пылесос
Керівництво з експлуатації. Пилосос
EN
UA
RU
091
2
A
B
C
D
EFHGI
J
L
K
M
3
Dear customer, we thank you for purchase of goods
Functionality, design and conformity to the quality standards
guarantee to you reliability and convenience in use of this device.
Please read and comply with these original instructions prior to the
initial operation of your appliance and store them for later use of
subsequent owners.
The cylinder vacuum cleaner is intended for home use only.
Under condition of observance of user regulations and a special-
purpose designation, a parts of appliance do not contain unhealthy
substances.
Technical specications
Model MR-601
Model: MR-600
Electrical supply:
Alternating current- AC;
Rated voltage 220-240V;
Rated frequency 50Hz;
Power consumption 1400W
Protective class II
Protection class IPX0
EN
4
Description of the appliance
Picture 1
А – Telescopic tube
В – Airow Control
С – hose handle
D – Hose
E – Hose Guider
F – top cover
G - Cord-rewinder Button
H – Light indicating the dust bag lling
I – power control
J - ON/OFF switch
К – power-line cord plug
L – crevice conductor
M - Universal nozzle “oor/carpet”
5
Safety instructions
When using your appliance, basic safety precautions
should always be followed, including the following:
ATTENTION!
- Do not immerse the appliance or power cord and plug in water or
other liquids, keep it away from rain and moisture.
- The appliance must always be unplugged before cleaning or
maintenance takes place.
- Never touch the plug with wet hands. Do not operate the appliance
outside or in rooms with a high level of humidity.
Failure to observe these rules may result in electric shock!
ATTENTION! Particularly prohibited:
- Use in the vicinity of explosive or highly-ammable substances.
There is a risk of re or explosion.
- To use the appliance outdoors. There is danger of rain or dirt
destroying the appliance.
- Sticking objects into the appliance’s openings. It could overheat.
- To modify or repair the appliance yourself.
- Vacuuming of:
- Persons, animals, plants, especially hair, ngers and other parts of
the body as well as articles of clothing on the body. These might be
drawn in. This could result in injuries.
- Water and other uids, especially damp carpet cleaners. Moisture
inside the appliance can cause a short-circuit.
- Toner (for laser printers, copying machines, etc.). There is danger
of re or explosion.
- Hot ash, burning cigarettes or matches. This could cause a re.
- Pointed objects, such as glass shards, nails, etc. They can
damage the appliance.
- Rubble, plaster, cement, ne drilling-dust, make-up, etc. These
might damage the appliance.
EN
6
- DO NOT leave the appliance unnecessarily plugged in. Disconnect
the plug from the mains when the appliance is not being used.
- DO NOT leave the appliance exposed to the weather (rain, sun,
etc.).
- In the interest of safety, regular periodic close checks should be
carried out on the supply cord to ensure no damage is evident.
Should there be any signs that the cord is damaged in the slightest
degree, the entire appliance should be returned to authorized
service engineer.
- This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
- Never carry the appliance by its power cord. It could be damaged.
- THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY. DO NOT
USE THE APPLIANCE FOR ANYTHING OTHER THAN INTENDED
USE.
Purchase industrial devices for commercial use.
Actions in extreme situations:
- If a device tumbled into water, immediately, unplug the device, not
touching to the device or water.
- In case of appearance from appliance of smoke, sparkling, strong
smell of a burn isolation, immediately stop use the device, unplug
the device, appeal to the nearest service center.
Operation
Before the rst use:
Remove packing and advertising materials and stickers.
Unwind the power line cord completely. Inspect the appliance and
make sure that there are no damages to the device, power line
cord, and plug.
7
ATTENTION! Do not pull out the power-line cord beyond the
red mark. A yellow mark indicates the working length of the
cord, a red one - maximum (Fig.2).
Fig. 2
Examine the vacuum cleaner, make sure that there are no
mechanical damages of the apparatus parts, of the power-line cord
and of the plug.
Insert the hose connector into the hole on the top cover of the
vacuum cleaner and keep pressing lightly until the lock clicks
(Fig. 3).
Fig.3
Fig.4
ATTENTION! To detach the hose from the vacuum cleaner, rst
press the release button, then pull out the hose ( Fig. 4).
EN
8
Attach the extension tube to the hose handle and the desired
conductor to the tube (Fig.5).
Fig.5
Powering on, handling
Set the power control to the minimum level, and plug the apparatus’
power plug into an electrical outlet.
Press the power button, to start the vacuum cleaner.
Set the power control to the required speed (power), depending
on the quality of the dust and the surface. For curtains and similar
surfaces it must be reduced.
To regulate the intake air ow during operation it is convenient to
do so with the help of the regulator mounted on the handle of the
apparatus (Fig. 6).
Fig.6
To open the regulator, pull upwards, press down to close it.
The following positions of regulator are recommended for dierent
items:
The regulator is fully open (suction force is minimal) for curtains,
and other light materials.
Mid-position(suction force is medium) for soft furniture, mattresses,
carpets.
The regulator is completely closed (maximum suction force) for
hard oor coverings and other hard and heavy objects.
9
After use, press the switch button when the vacuum cleaner
turns o, unplug the power cord.
Press the cord reel button and the cord will automatically enter
the vacuum cleaner body. While reeling on, gently hold the cord to
prevent the plug from hitting the vacuum cleaner body.
If the cord does not fully come or stopped, pull it out slightly and
press the button again. If the cord is still not completely reeled on, it
is recommended to pull it to the yellow mark and repeat the reeling
on procedure.
Select the conductor suitable for the surface.
ATTENTION! Before changing the conductors, the vacuum cleaner
should be switched o.
Universal conductor - “Floor-Carpet” brush
With its help, you can clean both hard and smooth oor surfaces
and objects, as well as eecy, such as carpets and similar
coverings.
The conductor has a switch with which the brush is pulled out or
retracted and can be easily and quickly adapted for the required
cleaning conditions.
For smooth oors, the use of a brush is eective, for cleaning
carpets, it is better to retracted the brush inside the conductor.
(Fig.7, Fig.8).
Fig.7 Fig.8
EN
10
Rimose conductor
Using this conductor, you can easily remove dust in such hard-to-
reach places as openings in heating batteries, creases in curtains,
corners, chandeliers, etc. (Fig. 9.
Fig.9
After use, press the switch button, unplug the power cord (Fig.10.
Fig. 10
Press the button for reeling on and the cord will automatically be
forvarded into the vacuum cleaner housing (Fig.11).
Fig.11
If the cord does not fully come or stopped, pull it out slightly and
press the button again. If the cord is still not completely reeled on, it
is recommended to pull it to the yellow mark and repeat the reeling
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Idiomas:
Otros manuales de Aspiradora de Maestro
