M2 Antenna Systems 300XP12 Manual de usuario

M2 Antenna Systems, Inc. 4402 N. Selland Ave. Fresno, CA 93722

Tel: (559) 432-8873 Fax: (559) 432-3059 Web: www.m2inc.com

Rev.00

Model .........................................300XP12

Frequency Range.......................280 To 320 mHz

*Gain ..........................................10.8 dBi

Front to back ..............................18.9 dB Typical

Beamwidth ...............................26° Typical

Feed type ...................................Folded Dipole

Feed Impedance........................50 Ohms Unbalanced

Maximum VSWR........................2:1

Input Connector..........................“N” Female

Power Handling..........................1.5 kW

Boom Length / Dia......................62” / 1”

Maximum Element Length..........21-.312”

Turning Radius:..........................59”

Stacking Distance.......................39”

Mast Size....................................2” Nom.

Wind area / Survival...................0.84 Sq. Ft. / 100MPH

Weight / Ship Wt.........................8 Lbs. / 13 Lbs.

M2 Antenna Systems, Inc.

Model No: 300XP12

FEATURES:

The 300XP12 is high performance circular polarized antenna with a remarkably clean pattern. The pattern is im-

portant in order to match the antenna’s noise temperature with modern low noise preamps. This antenna is ideal for satel-

lite work but is also excellent for terrestrial uses like ATV, repeater operation, and long haul tropo DX.

The CNC machined driven element module is O-ring sealed and weather tight for low maintenance and long-term

peak performance. Internal connected are encapsulated in a space-age silicone gel that seals out moisture and improves

power handling. The 1/2” 6061-T6 rod elements are centered to minimize interaction and maintain good ellipticity. Insula-

tors are UV stabilized and locked in place with stainless keepers. Rugged construction, uncompromising performance for

the boom length: that’s the M2300XP12!

SPECIFICATIONS:

*Subtract 2.14 from dBi for dBd

TOOL REQUIRED FOR ASSEMBLY: screwdriver, 11/32 nut driver or wrench, 7/16” and 1/2” socket or end

wrenches, measuring tape.

1. Assemble the boom using 8-32 X 1-1/4 screws and locknuts to join sections. (SEE DIMENSION SHEET).

2. Install Horizontal & Vertical Driven Element Assembly on to boom using 1/4-20 X 3” Bolt and lock nuts.

(SEE DIMENSION SHEET).

ASSEMBLING THE HORIZONTAL ELEMENTS

3. Layout the Horizontal elements by length and position as shown on the DIMENSION SHEET. Start with the

reflector (longest) element, install using a Screw, 6-32 X 1”,SS.

ASSEMBLING THE VERTICAL ELEMENTS

4. Layout the Vertical elements by length and position as shown on the DIMENSION SHEET. Start with the

reflector (longest) element, install using a Screw, 6-32 X 1”,SS. Note: The vertical element set is shifted

forward on the boom by 1/4 wave lengths. This increases isolation between element planes, improving

circularity and ease of phasing / matching the two element sets.

5. Install the boom to mast plate to the rear of the boom (SEE BOOM TO MAST DETAIL PAGE). Use two 1" U-

bolts and the stainless nuts and lock washers provided. DO NOT OVER TIGHTEN. 2” U-bolts (and stainless

steel nuts / lock washers) are provided for mounting the antenna to your NON-CONDUCTIVE mast or

crossboom. Other size u-bolts and cradles are available upon request.

M2ANTENNA SYSTEMS, INC.

4402 N. SELLAND AVE.

FRESNO, CA 93722

(559) 432-8873 FAX: 432-3059

www.m2inc.com Email: [email protected]

300XP12 ASSEMBLY MANUAL

300XP12 DIMENSION SHEET

1/4-20 X 3.0 BOLT

& LOCKING NUT

300XP12 BOOM TO MAST PLATE DETAIL

BOOM TO MAST PLATE

3”X 4” 125” WITH

1” CRADDLES

BOLT, 1/4-20 X 2.0”

& 1/4-20 NUTS AND

LOCKWASHERS

2” U-BOLT & CRADDLES

& 5/16-18 NUTS AND

LOCKWASHERS

300XP12 PARTS & HARDWARE

DESCRIPTION ..............................................................................QTY

BOOM SECTION # 1 W/STIFFNER, 1” X .058 X 48” SOE........... 1

BOOM SECTION # 2, 1” X .058 X 17”...........................................1

ELEMENTS, 5/16” ROD x DIM SHEET.........................................10

DRIVEN ELEMENT ASSEMBLY...................................................2

BOOM-TO-MAST PLATE, 3 X 4 X 0.125" (M2APT0019)............. 1

U-BOLT & CRADLE, 2” .................................................................2

CRADLE 1.0”, MACHINED (M2AMC0110)................................... 4

PENETROX / ZINC PASTE CUP..................................................1

ASSEMBLY MANUAL ...................................................................1

HARDWARE:

NUT, 5/16-18 SS............................................................................4

LOCKWASHER, 5/16 SS ..............................................................4

NUT LOCKING, 1/4-20 SS............................................................6

BOLT, 1/4-20 X 3.0 SS.................................................................. 2

BOLT, 1/4-20 X 2.0 SS.................................................................. 4

SCREW, 6-32 X 1.0 SS.................................................................12

LOCKWASHER, #6 SS .................................................................12

CABLE TIE, 8” NYLON..................................................................4

M2ANTENNA SYSTEMS, INC.

4402 N. SELLAND AVE.

FRESNO, CA 93722

(559) 432-8873 FAX: 432-3059

www.m2inc.com Email: [email protected]

Tabla de contenidos

Otros manuales de Antena de M2 Antenna Systems

M2 Antenna Systems

M2 Antenna Systems 222 HO LOOP Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 2M8WL Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 6M5XHG Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 40M4LLDD Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 25M4 Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 20M5-125 Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 40M2C Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 6M5XHP Manual de usuario

M2 Antenna Systems

M2 Antenna Systems Relay/Preamp Housing with MAP65 Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 30M3-125 Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 400-800-8 Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 40M3L Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 678-14 Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 10M4DX Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 440-6SX Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 6M HO LOOP Manual de usuario

M2 Antenna Systems

M2 Antenna Systems FGHM64 Manual de usuario

M2 Antenna Systems

M2 Antenna Systems FGSD-3.7DH Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 75-5AS Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 420-50-11 Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 440-18 Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 146CP8 Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 440-6SS Manual de usuario

M2 Antenna Systems

M2 Antenna Systems 80M2L Manual de usuario

Manuales populares de Antena de otras marcas

Alfa Network

Alfa Network APA-L01 Manual de usuario

Naval

Naval PR-422CA Manual de usuario

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manual de usuario

TERK Technologies

TERK Technologies TV44 Manual de usuario

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manual de usuario

HP J8999A Manual de usuario

MobilSat

MobilSat MSP-S Manual de usuario

Steren

Steren ANT-UHF 13 Manual de usuario

Novatel

Novatel 600-G Manual de operación

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manual de usuario

TRENDnet

TRENDnet TEW-AO12O Manual de usuario

Radio Shack

Radio Shack 15-1837 Manual de usuario

CommScope

CommScope CMAX-OMFX-43M-I53 Manual de usuario

Ramsey Electronics

Ramsey Electronics DAP25 Manual de usuario

COBHAM

COBHAM SAILOR 800 VSAT Manual de uso y cuidado

Trango Systems

Trango Systems AD900-9 Manual de usuario

Steren

Steren ANT-100 Manual de usuario

Proxim

Proxim 5054-PA-23 Manual de usuario