M-Audio MobilePre USB Manual de usuario

MobilePre USB

User’s Guide

Quick Start Guide

This Quick Start Guide is a very short, step-by-step guide to getting you

started right away at using your new M-Audio MobilePre USB.

Step 1: Run the Installer

Insert the included Install CD-ROM into your CD or DVD drive and

double-click the install program. Follow the onscreen instructions.

Depending on your operating system, you may be prompted to restart

your computer at the end of the installation procedure. If the installer

instructs you to restart, you must restart your computer.

Step 2: Connect the Audio Cables

Atypical system using the MobilePre USB has its two outputs connected

to a mixer or a pair of powered speakers. Connect a Microphone to the

Channel 1 XLR Input on the rear panel of the MobilePre USB.

Step 3: Connect the USB Cable

Connect the supplied USB cable to an open USB porton your computer.

Step 4: Test your Installation

Set your computer’s output to play out of the MobilePre USB and play and

audio file to test your connections. Launch an audio recording program,

arm one of the channels, and try recording some audio from a microphone

connected to the MobilePre USB’s inputs.

Still need more info? The following pages will walk you through the setup

and use of your MobilePre USB, in much greater detail.

Introduction

Thank you for purchasing the MobilePre USB by M-Audio. MobilePre USB

is your audio upgrade for any PC or Macintosh computer*, utilizing the

convenience of your computer’s USB port—no tools, computer

disassembly, or power supply is needed; In fact, the MobilePre USB is also

class-compliant on Windows XP & Mac OS X 10.2.6 & higher, so no driver

installation is necessary—just Plug and Play.The MobilePre USB brings you

two high-quality line or microphone/instrument inputs and stereo outputs,

making it the perfect compact recording solution for any computer.

Please take the time to read this User Guide. It will tell you how to install

the MobilePre USB on your particular computer and instruct you on how

to get the most from your MobilePre USB audio interface.

*Must meet minimum system requirements

Package Contents

Your MobilePreUSB was carefullypacked at the factory, and the shipping

carton was designed to protect the unit during shipping. Please retain this

container in the unlikely event that you need to return your MobilePre

USB for service.

The following items are included with your MobilePre USB:

• MobilePre USB audio interface

• One (1) high-quality USB cable

• M-Audio Driver CD (includes driver installation software)

• Additional software installation CDs

• This Product Manual

• Warranty Card

Features of the MobilePre USB

• Portable 16-bit/48kHz audio upgrade for laptops and desktops

• Supports professional two-channel recording and playback

•Supports common sampling frequencies (see T

echnical Spec section)

• Extremely wide dynamic range and low signal-to-noise (see Technical

Spec section) for ultra-quiet, professional-quality recording

•Analog 1/4” unbalanced outputs for powered speakers or stereo receiver

• Completely USB-powered (no power supply required)

•Class-compliancy onWindows XP & Mac OS X (10.2.6 & higher) systems

•One-year warranty

System Requirements

The MobilePre USB has been designed to work with Windows 98SE, ME,

2000, or XP and Mac OS 9.2.2 or OS X 10.1.5 and Jaguar (10.2.2). Specific

requirements include:

Windows PC:

Minimum Required—

• 350 MHz Pentium II

• 64MB RAM

• CD-ROM Drive

• Native USB 1.1 Port, on motherboard

• Windows® 98SE, 2000 (SP2), ME, or XP (SP1) Home or Pro (128 MB

RAM required for XP Pro)

Recommended—

• 700 MHz Pentium III

• 128MB RAM

• DVD-ROM Drive

• Windows 2000 (SP2) or XP (SP1) Home or Pro

Macintosh:

Minimum Required—

• Apple Macintosh® G3, 300MHz*; Apple Macintosh® G4, 350MHz*

• CD-ROM Drive

• Available built-in USB port

•Mac OS 9.2.2 or later with 128MB RAM; Mac OS X version 10.1.5,

10.2.6 or later with 256MB RAM

*CPU Accelerator cards not supported

Recommended—

• Apple Macintosh® G4, 500MHz*

• DVD-ROM Drive

• Mac OS X version 10.1.5, 10.2.6 or later with 512MB RAM

• Available built-in USB port

*CPU Accelerator cards not supported

Software Setup

Your MobilePre USB comes with driver software that allows it to

communicate with your computer’s operating system: Windows or Mac

OS. Please skip to your computer’s operating system in this section and

follow those instructions.

IMPORTANT NOTE: Your MobilePre USB provides a USB connector

which accepts the standardUSB cable supplied with the unit. You

should install the software drivers, as described below, BEFORE

connecting the MobilePre USB to your computer. After installing the

included drivers, plug the “computer end” of the cable into your

computer’s USB port. When you are asked to connect your MobilePre

USB during the driver software installation, simply plug the “device

end” of the USB cable into your MobilePre USB (the “computer end”

and “device end” will be easily identifiable by their size and shape).

Windows XP

1. Place the M-Audio Drivers Software CD in your CD-ROM Drive.

2. Launch the MobilePre USB Installer.exe installation program.

3. The MobilePre USB install screen will appear. Click “Next” to continue.

4. Click “Continue Anyway” on the next screen.

5. The CD performance enhancements page will then appear. Click

“Next.”

6. The installation program will now prompt you of a successful hardware

installation. Click “Finish” and restart your computer.

7. After restarting your computer, Windows will tell you that your

hardwarehas not passed Windows Logo testing. Go ahead and click

“ContinueAnyway,” to finish the installation.

8. Please refer to the HardwareInstallation section of this manual for

assistance in hooking up the MobilePre USB to your computer.

Windows 2000

1. Place the M-Audio Drivers Software CD in your CD-ROM Drive.

2. Launch the MobilePre USB Installer.exe program.

3. Close all other running applications, as directed by the first screen

that appears.

4. Direct X 8.1 or greater must be installed on your computer. If this

software has not been previously installed, the installer program will

prompt you to do so.If you have been presented with this request, click

“Next” to install or upgrade Direct X now.

5. Your MobilePre USB must be disconnected from your computer’s USB

bus, before continuing (if you just finished installing Direct X, your

computer will have restarted, and a reminder to disconnect the

MobilePre USB will follow).If it is currently connected, disconnect it now.

6. The MobilePre USB install screen will now appear.Click“Next” to continue.

7. Click “Yes” to continue.

8. Click “Next,” twice.

9. Click “Finish” on the next screen appearing.This will cause Windows to

restart your computer.

10. You may now connect the MobilePre USB to your computer (refer to

the Hardware Installation section of this manual for instructions).

11. After your computer restarts, you will be prompted with a note about

“Digital Signature not found.” Click “Yes” to continue.

Windows ME

1. Place the M-Audio Drivers Software CD in your CD-ROM Drive.

2. Launch the MobilePre USB Installer.exe program.

3. Close all other running applications,as directed by the first screen that appears.

4. Direct X 8.1 or greater must be installed on your computer. If this

software has not been previously installed, the installer program will

prompt you to do so.If you have been presented with this request, click

“Next” to install or upgrade Direct X now.

5. Your MobilePre USB must be disconnected from your computer’s USB

bus, before continuing (if you just finished installing Direct X, your

computer will have restarted, and a reminder to disconnect the

MobilePre USB will follow).If it is currently connected, disconnect it now.

6. The MobilePre USB install screen will now appear.Click“Next” to continue.

7. A screen appears that displays checked boxes for Digital Audio and

DMA transfer. Click “Next” to continue.

Otros manuales para MobilePre USB

Tabla de contenidos

Otros manuales de Equipo de grabación de M-Audio

M-Audio

M-Audio GuitarBox PRO Manual de usuario

M-Audio

M-Audio FireWire 410 Manual de usuario

M-Audio

M-Audio ProjectMix I/O Manual de usuario

M-Audio

M-Audio CODE 25 Manual de usuario

M-Audio

M-Audio KS49-051501 Manual de usuario

M-Audio

M-Audio CTRL49 Manual de usuario

M-Audio

M-Audio Fast Track Pro 4 x 4 Mobile USB Audio/MIDI Interface with... Manual de usuario

M-Audio

M-Audio Oxygen 49 Manual de usuario

M-Audio

M-Audio MacMan Manual de usuario

M-Audio

M-Audio Trigger Finger Manual de usuario

M-Audio

M-Audio Groove Lab Manual de usuario

M-Audio

M-Audio OXYGEN PRO49 Manual de usuario

M-Audio

M-Audio USB OMNISTUDIO Manual de usuario

M-Audio

M-Audio Evolution UC-33e Manual de usuario

M-Audio

M-Audio USB OMNISTUDIO Manual de usuario

M-Audio

M-Audio M-Track Eight Manual de usuario

M-Audio

M-Audio Recording Equipment Manual de usuario

M-Audio

M-Audio Audiosport Quattro Mac Manual de usuario

M-Audio

M-Audio FireWire 410 Manual de usuario

M-Audio

M-Audio Black Box Manual de usuario

M-Audio

M-Audio USB OMNISTUDIO Manual de usuario

M-Audio

M-Audio Fast Track Manual de usuario

M-Audio

M-Audio PROFIRE 2626 Manual de usuario

M-Audio

M-Audio Digital Recording Interface Delta 44 Manual de usuario

Manuales populares de Equipo de grabación de otras marcas

KV2 Audio

KV2 Audio 500 Series Manual de usuario

Robotics Technologies

Robotics Technologies microBus-Cam II Manual de usuario

Seca

Seca 460 Manual de usuario

Cognex

Cognex MVS-8000 Series Manual de usuario

Mect

Mect MPNC006 Series Manual de usuario

Bad Caf

Bad Caf THE LEASH Manual de usuario

Strymon

Strymon NIGHTSKY Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manual de usuario

Tews Technologies

Tews Technologies TPMC465 Manual de usuario

Honeywell

Honeywell Excel 50 Manual de usuario

SeaLevel

SeaLevel COMM+8.LPCI Manual de usuario

Arturia

Arturia AUDIOFUSE STUDIO Manual de usuario

Rukra

Rukra RK-1240 Manual de usuario

Samson

Samson SCOM Manual de usuario

Dynacord

Dynacord DPS260 Manual de usuario

Nice

Nice Core Manual de usuario

Pyle Pro

Pyle Pro PSS8 Manual de usuario

RF-System

RF-System TinyGate Manual de uso y cuidado