Lynx CLS-28 Manual de usuario
USER MANUAL
V.21.01
Lynx Pro Audio S.L.
CLS-28
CLS-118S
CLS-218S
Manufacturer
CE CERTIFICACTION, EUROPEAN PRODUCT
CLS-28
LYNX Pro Audio S.L.
Calle 1 - Pol. Ind. Picassent
E-46220 Picassent (Valencia)
This user guide is property of Lynx Pro Audio S.L. Any reproduction of this manual, by any means is strictly prohibited.
Copyright 2020. All rights reserved.
CLS-118S
CLS-218S
CLS Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 3
INTRODUCTION
This manual describes the recommended installation procedure for the Coaxial Line Source cabinets CLS-28 in
combination with the subwoofers CLS-118S and CLS-218S.
The CLS series is Lynx Pro Audio’s answer to scalable line array systems.
Extreme care has been taken to select and customize the most advanced components on the market, including coaxial
Mid/high drivers together with full electronic synergy through the coupling of the system amplication & integrated
DSP technology.
Total system control is also achieved through our 3D prediction software (Rainbow 3D) working together with our
remote system management platform (OCS). These cutting edge softwares together with the CLS technology provides
the most optimum and precise listening experience to every ear in the audience.
CONTENTS
• SAFETY PRECAUTIONS 4
• SYSTEM OVERVIEW
CLS-28 5
CLS-118S 7
CLS-218S 9
BACK PANEL 11
CONNECTORS AND CONNECTIONS 13
• CONFIGURING THE DIGITAL SIGNAL PROCESSOR
FIR FILTERS 15
CONFIGURING THE DSP OPTIONS 15
CONFIGURATION PANEL 15
• ONLINE CONTROL SYSTEM 17
• RAINBOW 3D ACOUSTIC SIMULATION SOFTWARE 18
• HARDWARE AND ACCESSORIES 19
• CLS-28 RIGGING HARDWARE 20
• CLS-28 HOW TO FIX CABINETS 21
• HOW TO USE THE FLYING FRAME ON CLS-28 23
• CLS-118S RIGGING HARDWARE 25
• HOW TO USE THE FLYING FRAME ON CLS-118S 26
• FLOWN CONFIGURATION ON CLS-118S 27
• STACK CONFIGURATION ON CLS-118S 31
• APPLICATION EXAMPLES FOR CLS-118S 36
• APPLICATION EXAMPLES FOR CLS-218S 37
• CERTIFICATIONS AND GUARANTEE 41
CLS Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 4
Before starting to use this device, please read this instruction manual carefully.
Keep these instructions in the place where the equipment will be used and with easy access to them.
• Electrical appliance
The exclamation mark within a triangle identies the presence of electricity. Use the system carefully without wet
hands or feet. Avoid installing the speaker in wet or excesivelly humid places. Do not place material that contains
liquid on or near the unit. Avoid dripping or splashing water or any liquid over the unit. Regularly check the condition
of the cables and make sure these are not being walked on or pinched. Connect the speaker to bipolar, earthed
mains. The mains plug must be connected to the appropriate protection (fuse or breaker). Connection to any other
type of mains could result in an electrical shock and violate local electrical codes.
CAUTION: DO NOT CONNECT OR DISCONNECT THE AC POWER CONNECTORS UNDER LOAD.
•Heavy equipment
Apply back protection when using the system. Avoid loading and unloading at heights.
•Electrical shock risk
The diagonal mark within a triangle identies the presence of dangerous voltage.
Do not open or handle the interior of the box. These parts are not to be adjusted by the user. For maintenance and/
or repair please go to an authorized service centre.In order to reduce the risk of electric shock, disconnect from
AC before plug in or unplugging Audio signal cables. Reconnect to AC only if all signal connections are made and
secured. Never manipulate the ground type plug provided.
The AC mains plugs should always remain accessible for operation.
Unplug the loudspeaker during storms or when it’s being used for a long time.
•Hearing damage risk
These systems can reproduce large quantities of sound pressure which can damage hearing. Take precautions if
you are going to be near them for extended amounts of time and do not get too close.
•Hanging / Flying
Do not hang the cabinets from the handles or from any other part other than the designated hanging point. When
ying this system please observe the technical and “Rainbow” software data carefully. Never exceed the maximum
safe working loads or ignore the instructions included within this manual. Use Only ying accessories provided by
Lynx Pro Audio S.L. Rigging must be always carried out by professionals.
•Delicate Material
Please ensure no foreign object or water enters the speaker. Only clean the unit with dry cloths. Do not use solvents.
•Overheating / Fire risk
To reduce the risk of the speaker over heating, avoid direct contact with sunlight. Avoid placing the unit close to heat
inducing objects such as radiators. Do not cover the equipment in use and do not block any ventilation openings.
Do not put naked ame, such as lighted candles, close or on top of the unit.
•Electromagnetic and interferente emissions
Avoid placing objects which through electromagnetic waves can damage the unit, such as mobile phones, lap tops,
magnetic strip cards etc.
This system complies with normatives EN 55103-1 (1)
EN 55103-2 (2)
(1) This device may not cause harmful interferences.
(2) This device may receive interference including interferences that may cause undesired working.
•IMPORTANT NOTE
This Equipment must be used in accordance with these instructions and by trained professional personnel only.
This equipment should not be used in places with extreme tropical climates. Don’t expose this apparatus to extreme
humidity and or temperature values.
CLS Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 5
SYSTEM OVERVIEW
• Technical Data:
Frequency range: 65 Hz - 22 KHz ( - 6 dB)
Horizontal coverage: 100º
Vertical coverage: Single element 10º
Max SPL / Peak: 135 dB / 141 dB
Components:
• LF: LF: 2 x 8” (2.5” DUO double layer in/out copper voice coil), waterproof cone
treated on both sides, neodymium magnet. 1000 W AES
• MF/HF: 8” dual diaphragm coaxial planar wave driver.
- Mid: 3.5” (90 mm) voice coil, 150 W (AES)
- High: 1.5” (44.4 mm) voice coil, 80 W (AES)
Power amplier: 2800W Class D with switching power supply & PFC
LF amplier: 1 x 1400 W
MF/ HF amplier: 1 x 1400 W
DSP: Internal Lynx Processor DSPB-FL.
96 KHz / 64 bit double-precision, DSP with FIR lter linear phase
High performance 32 bit 96 KHz AD/DA converters
Crossover: Digital, FIR lter 550Hz
Passive, 6.3 KHz
Control: User control interface with 2.8” IPS and multifunction joystick controller
Control connections: USB (DSP programming)
Dual Ethernet port, Online Control System
Input: BAL/ UNBAL XLR connectors analog input
AES3 digital input optional
Nominal voltage: 100 - 240V AC @ 50-60 Hz
Operating voltage: 85 - 264V AC
AC Connectors: 16A Neutrik powercon true1 TOP with looping output
Finish: Polyurea coating, high grade resistant paint
Material: 15 mm Premium birch plywood
Dimensions: 254.5 x 600 x 480 mm (H x W x D) / with pins 613.5 mm (W)
Weight: 27 Kg (59.5 lbs)
•CLS-28
Extremely compact & powerful 3-way, self-powered (2800 W Class-D with PFC), DSP integrated
coaxial line array element. Dual high power 8” neodymium transducers and a unique 8” dual diaphragm
coaxial planar wave driver.
•Key features
• Extraordinary power-to-size ratio
• Unique 6.5” dual diaphragm planar wave driver
• Perfect acoustical coupling of individual units providing continuous line source & excellent phase coherence
• Extended bandwith (65 Hz – 22 KHz)
• Integrated Digital processor (64 bit / 96 KHz) with FIR linear phase ltering
• Perfect Time Alignment avoiding Multi-Source Interference problems
• Ergonomic design in premium birch plywood & nished in polyurea
• 2.8” IPS display with multifunction joystick control
CLS Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 6
• CLS-28 measurements
613.5
480
254.5
10º
CLS Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 7
• Technical Data:
Frequency range: 30 Hz - 100 Hz ( preset 100 Hz)
Coverage: Quasi omnidirectional
Max SPL / Peak: 131 dB / 137 dB
Components:
• LF: 18” Neodymiun magnet transducer. 4.5” split winding copper voice coil,
Waterproof cone with treatment for both sides. Aluminium demodulating ring
for very low distortion. 1700 W (AES)
Power amplier: 3000W Class D with switching power supply & PFC
DSP: Internal Lynx Processor DSPB-FL. 96 KHz / 64 bit double-precision
High performance 32 bit 96 KHz AD/DA converters 120dB
Conguration: Bass-reex direct radiation enclosure
Control: User control interface with 2.8” IPS and multifunction joystick controller
Control connections: USB (DSP programming)
Dual Ethernet port, Online Control System
Input: BAL/ UNBAL XLR connectors analog input + loop
AES3 digital input + loop
Nominal voltage: 100 - 240V AC @ 50-60 Hz
Operating voltage: 85 - 264V AC
AC Connectors: 16A Neutrik powercon true1 TOP with looping output
Finish: Polyurea coating, high grade resistant paint
Material: 15 mm / 18 mm premium birch plywood
Dimensions: 600 x 613 x 770 mm (H x W x D) / with pins 609 x 613 mm (H x W)
Weight: 58 Kg (127.8 lbs)
• CLS-118S
Compact & extremely powerful, self-powered (3000W Class-D with PFC), DSP integrated subwoofer
unit in direct radiation conguration. 21” (4” voice coil) neodymium transducer.
• Key features
• Extraordinary high power output
• Integrated Digital processor (64 bit / 96 KHz)
• Front & rear audio and power connectors for cardioid applications
• Ergonomic design in premium birch plywood & nished in polyurea
• 2.8” TFT display with multifunction joystick control
• Stackable and yable standard and/on cardioid conguration
CLS Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 8
600
613
770
600
609
770
• CLS-118S measurements
CLS Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 9
• CLS-218S
This is an extremely compact & powerful sub-bass unit in direct radiation conguration. The CLS-218S is
self-powered (6000 W Class-D) with DSP integrated. It uses dual 18” neodymium transducers (4.5” voice coil).
• Technical Data:
Frequency range: 30 Hz - 100 Hz ( preset 100 Hz)
Coverage: Quasi omnidirectional
Max SPL / Peak: 136 dB / 142 dB
Components:
• LF: Dual 18” Neodymium magnet transducer. 4.5” split winding copper voice coil.
waterproof cone treated on both sides. Aluminium demodulating ring for very
low distortion. 1700 W (AES)
Power amplier: 6000W Class D with switching power supply & PFC
DSP: Internal Lynx Processor DSPB-FL. 96 KHz / 64 bit double-precision
High performance 32 bit 96 KHz AD/DA converters 120dB
Conguration: Bass-reex direct radiation enclosure
Control: User control interface with 2.8” IPS and multifunction joystick controller
Control connections: USB (DSP programming)
Dual Ethernet port, Online Control System
Input: BAL/ UNBAL XLR connectors analog input + loop
AES3 digital input + loop
Nominal voltage: 100 - 240V AC @ 50-60 Hz
Operating voltage: 85 - 264V AC
AC Connectors: 16A Neutrik powercon true1 TOP with looping output
Finish: Polyurea coating, high grade resistant paint
Material: 15 mm / 18 mm premium birch plywood
Dimensions: 600 x 1200 x 770 mm (H x W x D)
Weight: 81 Kg (178.5 lbs)
• Key features
• Extraordinary high power output and sonic linearity
• Integrated Digital processor (64 bit / 96 KHz)
• Front & rear audio and power connectors for cardioid applications
• Ergonomic design in premium birch plywood & nished in polyurea
• 2.8” IPS display with multifunction joystick control
• Stackable and yable standard and/on cardioid conguration
CLS Series User Manual
Lynx Pro Audio S.L www.lynxproaudio.com 10
• CLS-218S measurements
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Sistema de altavoces de Lynx
Lynx
Lynx CLS-212 Manual de usuario
Lynx
Lynx ADP-215 Manual de usuario
Lynx
Lynx ionic-100 Manual de instrucciones
Lynx
Lynx ADP Series Manual de usuario
Lynx
Lynx LX-F6 Manual de usuario
Lynx
Lynx ionic-100 Manual de instrucciones
Lynx
Lynx LX-318C Manual de usuario
Lynx
Lynx GXR-LA10A Manual de usuario
Lynx
Lynx GXR-12 Manual de usuario
Lynx
Lynx yellobrik PDM 1284 D Manual de usuario
