Lutron Electronics Stanza Instrucciones de funcionamiento

StanzaTM

wiring and

programming

guide

Page 1

StanzaTM Wiring and Programming Guide

Stanza Drives are available for control of Draperies and Roller Shades. Stanza Shades and Drapes

can be controlled as part of a Stanza Integrated System, incorporating Stanza lighting controls, or

as a Stanza Standalone System, without lighting controls. This Stanza Wiring and Programming

Guide describes how to set up Stanza shades and drapes in both applications.

Both the Stanza Integrated System and Stanza Standalone System utilize the same Contact

Closure Drive to motorize the shade or drape. The Drives are powered from a 24 V--- power

supply and can be controlled via two contact closure inputs, one for open and one for close.

Drives that are part of the Stanza Integrated System receive these contact closures from a

Stanza Contact Closure Interface, SZ-IO. Drives that are part of a Stanza Standalone System

receive these contact closures from a Stanza Standalone keypad. Two types of keypads are

available: one for a single Shade or Drape application and one for a dual Shade or Drape

application.

The Shade or Drape can also be operated via an infrared Hand-Held Remote Control.

These can be used in either a Stanza Integrated System or Stanza Standalone System. Each

Drive that is being controlled, must have its own IR receiver. Two types of IR Remotes are

available: one for a single Group application and one for a Two Group application. The IR remotes

can move the Shade or Drape to the open and close limit. They also provide the additional

functions of storing and recalling a favorite preset, and setting open and close limits remotely.

Page 2

StanzaTM Wiring and Programming Guide

Table of Contents Page

Basic Operation

Keypad Functions

IR Remote Functions

Wiring

Infrared Receiver

Stanza Standalone System

Stanza Integrated System

Contact Closure

Contact Closure Speciﬁcation

Setting Limits

From the Drive

From an Infrared Remote

Programming

Assigning Drive to Remote Control

Storing Favorite Preset

Programming Lock Out

Restoring Default Settings

Diagnostics

SZ-IO Diagnostics Mode

Troubleshooting

Troubleshooting Chart

4-5

7-8

9-10

13-16

18-19

1.1

StanzaTM Keypads Functions

Page 3

StanzaTM Wiring and Programming Guide

Open

Single Group Keypad

Provides control of one group of Shades or Drapes

Dual Two Group Keypad

Provides control of two groups of Shades or Drapes

Open

Tap Open Button

Shade or Drape goes to

open limit

Tap Close Button

Shade or Drape goes to

close limit

Tap Open Button

Shade or Drape goes to open limit

Tap Close Button

Shade or Drape goes to close limit

Group 1

Group 2

Same functions as above

•Stanza Standalone System Keypads are available in Single Group and Dual

Group styles.

•Each Shade or Drape in the system must be wired directly to the keypad to allow

it to be controlled via the keypad. No additional programming steps are required

to assign keypads to the Shade or Drape.

•A maximum of 4 Shades or Drapes can be wired to any keypad output:

daisy chained or homerun

•Stanza Standalone System Keypads provide contact closures to the Shade or Drape,

and require no input power.

Tapping any button while

Shade or Drape is moving

will cause it to stop.

Tapping any button while

Shade or Drape is moving

will cause it to stop.

Infrared Hand Held Remote Controls | Functions

2.1

Page 4

StanzaTM Wiring and Programming Guide

•The Single Shade or Drape Remote can only be used in applications to control one group

of Shades or Drapes

•Each Drive in the system requires its own IR Remote to allow it to be controlled via IR.

•Open and Close limits can be set via IR Remote

•Tapping any button while Shade or Drape is moving will cause it to stop

•All Shades or Drapes with an IR receiver will respond to the Single Group IR Remote as shipped,

without any additional programming

Single Group IR Remote

Provides control of one Group of Shades or Drapes

Open

Press Raise Button

Shade or drape goes toward

open limit

Press Lower Button

Shade or drape goes toward

close limit

Tap Favorite Preset Button

Shade or drape goes to stored preset

Tap Open Button

Shade or drape goes

to open limit

Tap Close Button

Shade or drape goes

to close limit

Page 5

StanzaTM Wiring and Programming Guide

Infrared Hand Held Remote Controls | Functions

(continued)

•All Stanza Drives with an IR receiver will respond to the Top Group of buttons without any

programming

•Shade or Drape Group Assignment is required to allow the Bottom Group of buttons to

control Shades or Drapes. Refer to Section 11, Assigning Drive to IR Remote.

•The Dual Group Remote provides independent control of two Groups of shades or drapes

typically one Sheer Group and one Blackout Group.

•Each Drive in the system requires its own IR Receiver to allow it to be controlled via IR.

•Open and Close limits can be set via IR Remote

•Tapping any button while Shade or Drape is moving will cause it to stop

Dual Group IR Remote

Provides control of two Groups of Shades or Drapes

Open

Sheer

Open

Blackout

Press Raise Button

Shade or Drape goes toward

open limit

Press Lower Button

Shade or Drape goes toward

close limit

Tap Favorite Preset Button

Shade or Drape goes to stored preset

Tap Open Button

Shade or Drape goes

to open limit

Tap Close Button

Shade or Drape goes

to close limit

Top Group

Bottom Group

Same Functions as above

2.2

Remote IR Eye

Lutron®offers a remote infrared eye for Stanza. It is a small dome connected to the Drive by a

22 in (560 mm) cable.

The remote infrared eye plugs into a dedicated IR connector on the Drive. Ten foot extensions are

available if the layout requires the IR eye to be located further from the Drive. The IR eye may be

located up to 50 ft (15 m) away from the Drive. Unobtrusive mounting clips and adhesive tape are

also provided.

Note: Each Stanza Drives must have its own remote IR eye to be controlled via infrared remote.

StanzaTM | Infrared Receivers

3.1

StanzaTM Wiring and Programming Guide

SV-IR-EXT-10

Up to 5 can be connected end to end

for a 50 ft (15,250 mm) extension.

10 ft (3050 mm)

SV-IR Infrared remote eye, available in white

and royal plum. SV-IR connects to optional

extension cable (SV-IR-EXT-10) or directly

to the Drive

Page 6

Page 7

StanzaTM Wiring and Programming Guide

4StanzaTM Standalone System |Single Drive Wiring

Terminal block of

Drive controlling single

Shade or Drape

Com

24 V---

Com

24 V---

Open

SZ-PS-1-50

Power Supply

Single Group

Keypad

Wiring types Purpose Wire options

AContact Closure Input/Output 18-22 AWG (1.00-0.50 mm²)

per contact closure - 250 ft (75 m) max

BDrive power (power supply to Drive) 12 AWG (4 mm²) - 250 ft (75 m) max

16 AWG (1.5 mm²) - 100 ft (30 m) max

18 AWG (1 mm²) - 50 ft (17 m) max

Wire Type A

Wire Type B

Stanza Drapery or

Roller Shade Drive

Notes:

•Standalone shade or drapery drives can be controlled with a keypad, IR remote, or both.

•Pressing any button on any keypad or IR remote while the shade or drape is moving will

cause the shades or drapes in the group to stop.

•Secondary wiring must be of type CL2, CL2P, CL2R, CL2X or other cable with equivalent

or better electrical, mechanical, and ﬂammability ratings in accordance with local and national

electric code.

Single group

IR Transmitter

IR Receiver

Page 8

StanzaTM Wiring and Programming Guide

5StanzaTM Standalone System |Dual Drive Wiring

Com

24 V

Open

Com

24 V

Open

Com

24 V---

Open

Terminal block of

Drive controlled by

Group 1 buttons

Com

24 V---

Com

24 V---

Com

24 V---

Open

Terminal block of

Drive controlled by

Group 2 buttons

Stanza Drapery or

Roller Shade Drive

SZ-PS-1-50

Power Supply

Dual Group Keypad

SZ-PS-1-50

Power Supply

Wiring types Purpose Wire options

AContact Closure Input/Output 18-22 AWG (1.00-0.50 mm²)

per contact closure - 250 ft (75 m) max

BDrive power (power supply to Drive) 12 AWG (4 mm²) - 250 ft (75 m) max

16 AWG (1.5 mm²) - 100 ft (30 m) max

18 AWG (1 mm²) - 50 ft (17 m) max

Wire Type B

Wire Type A

Stanza Drapery or

Roller Shade Drive

Optional IR

Receiver

Optional IR

Receiver

Notes:

•Standalone shade or drapery drives can be controlled with a keypad, IR remote, or both.

•Pressing any button on any keypad or IR remote while the shade or drape is moving will

cause the shades or drapes in the group to stop.

•Secondary wiring must be of type CL2, CL2P, CL2R, CL2X or other cable with equivalent

or better electrical, mechanical, and ﬂammability ratings in accordance with local and national

electric code.

Dual group

IR Transmitter

Page 9

StanzaTM Wiring and Programming Guide

CCO 1 NC

CCO 1 NO

1-2 COM

CCO 2 NC

CCO 2 NO

CCO 3 NC

CCO 3 NO

3-4 COM

CCO 4 NC

CCO 4 NO

CCO 5 NC

CCO 5 NO

5 COM

CCI 1

CCI 2

CCI 3

CCI 4

CCI 5

COM

+PWR

COM

Contact Closure Outputs (CCO)

Contact Closure Inputs (CCI)

6StanzaTM Integrated System |Single Drive Wiring

Com

24 V---

Open

Terminal block of

Drive controlling

single Shade or

Drape

Com

24 V---

SZ-PS-1-50

Power Supply

SZ-IO

Contact Closure

Interface

Wiring types Purpose Wire options

AContact Closure Input/Output 18-22 AWG (1.00-0.50 mm²)

per contact closure - 250 ft (75 m) max

BDrive power (power supply to Drive) 12 AWG (4 mm²) - 250 ft (75 m) max

16 AWG (1.5 mm²) - 100 ft (30 m) max

18 AWG (1 mm²) - 50 ft (17 m) max

Wire Type A

Wire Type B

Notes:

•SZ-IO outputs programmed as a 0.25 second momentary contact closure output

•Activating Open or Close while the shade or drape is moving will cause it to stop

•If a Stop function is required, program the SZ-IO to activate both Open and Close contacts

simultaneously (within 50 ms of each other)

•Secondary wiring must be of type CL2, CL2P, CL2R, CL2X or other cable with equivalent

or better electrical, mechanical, and ﬂammability ratings in accordance with local and national

electric code.

Stanza Drapery or

Roller Shade Drive

Otros manuales para Stanza

Tabla de contenidos

Otros manuales de Mobiliario de interior de Lutron Electronics

Lutron Electronics

Lutron Electronics Serena CS-EDU3-SYJ Manual de usuario

Lutron Electronics

Lutron Electronics Roller 20 Instrucciones de funcionamiento y mantenimiento

Lutron Electronics

Lutron Electronics Sivoia QS Manual de usuario

Lutron Electronics

Lutron Electronics PALLADIOM LMR-C Manual de usuario

Lutron Electronics

Lutron Electronics PALLADIOM WIN-BC-LWC Series Manual de usuario

Lutron Electronics

Lutron Electronics Sivoia QS Instrucciones de funcionamiento

Lutron Electronics

Lutron Electronics Sivoia QS Manual de usuario

Lutron Electronics

Lutron Electronics VIMCO SIVOIA SV-MDU-20-KIT Manual

Lutron Electronics

Lutron Electronics Sivoia QS roller 100 Manual de usuario

Lutron Electronics

Lutron Electronics Sivoia QED Manual de servicio

Lutron Electronics

Lutron Electronics Sivoia QS Triathlon Guía de configuración

Lutron Electronics

Lutron Electronics Sivoia QED Manual de usuario

Lutron Electronics

Lutron Electronics Sivoia QED Roller 64 Manual de usuario

Lutron Electronics

Lutron Electronics SIVOIA Manual de usuario

Lutron Electronics

Lutron Electronics Serena Manual de usuario

Lutron Electronics

Lutron Electronics Sivoia QED Manual de usuario

Lutron Electronics

Lutron Electronics Sivoia QS roller 100 Manual de usuario

Manuales populares de Mobiliario de interior de otras marcas

Homelegance

Homelegance California 1662PEK-1CK Manual de usuario

Osmond Ergonomics

Osmond Ergonomics FLO Manual de usuario

OVE

OVE ELOISE 42 Manual de usuario

overstock

overstock MF286255 Manual de usuario

Sonoma

Sonoma 160-801 Manual de usuario

BOLERO

BOLERO Wicker Side Chair CF158 Guía de instalación

Coaster

Coaster 4799N Manual de usuario

Stor-It-All

Stor-It-All WS39MP Manual de programación

Lexicon

Lexicon 194840161868 Manual de usuario

Next AMELIA NEW 462947 Manual de usuario

Furinno

Furinno 18089 Manual de usuario

Munchkin

Munchkin Push to Close MK0001 Manual de usuario

impekk

impekk Manual II Manual de usuario

Elements

Elements Ember Nightstand CEB700NSE Manual de usuario

JWA

JWA CARY 68429 Manual de usuario

VIPACK

VIPACK AMORI AMKB9014 Manual de usuario

Anthro

Anthro GT03 Series Manual de usuario

Rowico

Rowico SANNA Manual de usuario