Lumos Networks DSL Modem Manual técnico
Broadband DSL
Quick Start
Set Up Guide
What’s in the box? ............................. 1
Applying the DSL lters ......................... 2
What devices must be ltered.................... 3
Connecng the DSL modem ...................3 - 5
Connecng a computer ......................... 5
Seng up a computer ........................6 - 8
Troubleshoong ............................9 - 10
Notes ........................................11
Index
• 2 DSL Filters • 1 Phone Cord
• 1 DSL Modem • 1 Power Adaptor
• 1 Ethernet Cable
.
DSL Modem
Ethernet Cable
Phone Cord
DSL Filters
Power Adapter
The following items are not included and must be provided by you:
PC with XP/Vista/7 installed
-or– Apple Macintosh with OS 8/9/ OSX
-or– An Ethernet capable OS, router, or gaming plaorm
1
What’s In The Box
• Internet Browser (ie. Internet Explorer, Mozilla Firefox, Safari or
Google Chrome)
• TCP/IP Installed
• An Ethernet card must be installed in your computer prior to DSL
Modem installaon and computer conguraon unless you plan to
use a USB connecon. Please see secon ‘Connecng a Computer’
for USB System requirements and installaon instrucons.
If you are missing any of the above items, please call
Lumos Networks Customer Care at 888-553-6454
Install the DSL lters on every device that shares the same number as
the DSL Modem (example below). The lter is designed
to remove the DSL signal from whatever device it is aached.
Do not lter the DSL Modem.
Wall Jack
DSL Filter
2
Applying the DSL Filters
Phone Cord
Phone
Phones (*See below for wall phones) • Dial-up Modems
• Cordless Phone Base Staons • Satellite TV/Tivo®Systems
• Caller ID Units • Meter Readers
• Answering Machines • All other devices that
• Security System use the same number as
• Fax Machines the DSL Modem
If you need a wall mount lter call
Lumos Networks Customer Care at 888-553-6454.
The wall mount lter may need to be installed
by security provider/professional.
Steps to install the DSL Filters.
1. Disconnect the phone cord from the wall jack
2. Connect the DSL lter to the wall jack
3. Connect the phone cord into the DSL lter
4. Repeat steps 1-3 for addional devices that must be ltered
(see above)
* DO NOT FILTER THE DSL MODEM *
If you need addional DSL lters call
Lumos Networks Customer Care at 888-553-6454.
Connect the DSL Modem directly to a working wall jack on the DSL
line using the phone cord included with the DSL Modem. Avoid us-
ing a standard phone cord that is longer than 8 feet.
3
What devices must be ltered?
Connecng the DSL Modem
Plug the power supply into the DSL Modem and into a working
electrical outlet. To avoid possible damage to the DSL Modem, use a
surge protector between the DSL Modem and outlet. Do not connect
the DSL Phone cord to the surge protector as it may cancel out the
DSL signal.
The DSL light will blink a few mes to indicate it is connecng or
“training up”. This process can take a few moments. The DSL light
must go solid (as shown below) to indicate a successful DSL connec-
on through your line.
A solid DSL light
indicates
a successful
DSL connecon
4
DSL Modem
Phone Cord
Wall Jack
1. Plug one end of the Ethernet cable into your computer’s Ethernet
port and the other end into the DSL Modem’s Ethernet port.
2. The phone cord should already be plugged into the DSL modem
(page 3). If not, plug the phone cord into the DSL Modem and into
your wall jack.
3. The power supply should already be plugged into the DSL
Modem (page 4). If not, plug the power supply into a working
electrical outlet and into your modem. Turn the modem on.
If the DSL light connues to blink, the DSL is not connected, please
recheck the connecon of the DSL lters. Refer to pages 2 - 3:
‘Applying the DSL Filters’ for ‘What devices must be ltered?’
Please avoid passing the DSL Phone cord through a splier or surge
protector.
If the DSL light does not come on check the phone cord connecon
between the DSL modem and wall jack. If the problem sll exists, try
another jack on the same phone line.
Connecng a computer using the Ethernet cable is highly
recommended
Connecng a computer using the ethernet cable.
5
Connecng the DSL Modem
Connecng a computer using the USB cable.
To connect your computer to the DSL modem using a USB cable,
please contact Lumos Networks Customer Technical Support at
1-888-553-6454 for detailed instrucons
If you are unable to browse aer ‘Connecng a Computer’ the
following steps are necessary.
On Windows All Versions
• Open Internet Explorer
• Click Cancel if your computer is trying to use a
Dial-Up connecon
• Open Tools
• Click ‘Internet Opons’
• Click the ‘Connecons Tab’
• Ensure that ‘Never Dial a Connecon’ is selected
• Click ok
On Windows XP
• Open the Start menu in the boom le of your screen
• Open Control Panel
• Click the “switch to classic view” buon on the
upper le of the control panel
• Open the Network Connecons
• Right click Local Area Connecon
• Click Properes
• Select Internet Protocol TCP/IP
• Click Properes
• Ensure that “obtain DNS address automacally”
and “obtain ip address automacally” are selected
• Click ok
• Click ok
6
Seng up a Computer
On Windows Vista
• Open the Start menu in the boom le of your screen
• Open Control Panel
• Click the ‘classic view’ buon on the upper le of
the control panel.
• Click on the Network and Sharing Center. On the
le hand side under ’
Tasks’ click ‘manage network connecons’
• Right click your Local Area Connecon properes
• Select Internet protocol version 4 (tcp/ipv4)
• Click properes
• Make sure that “obtain DNS address automacally”
and “obtain ip address automacally” are selected
• Click ok
• Click ok
On Windows 7
• Open the Start Menu in the boom le of your screen
• Click Control Panel
• Click on the Network and Sharing Center. On the
le hand side click ‘change adapter sengs’
• Right click your Local Area Connecon properes
• Select Internet protocol version 4 (tcp/ipv4)
• Click properes
• Make sure that “obtain DNS address automacally”
and “obtain ip address automacally” are selected
• Click ok
• Click ok
7
On Mac OS 8/9
• Open the Apple Menu in the top le of your screen
• Click ‘Control Panels’
• Select TCP/IP
• Connect via should be set to ‘Built in Ethernet’
• Congure should be set to ‘Using DHCP Server’
• Close the window
• Reboot
On Mac OSX
• Open the Apple Menu in the top le of your screen
• Click ‘System Preferences’
• Select Network
• Select show ‘Built in Ethernet’
• Ensure ‘Using DHCP’ is select in Congure IPv4
• Click Show
• Click Network Port Conguraon
• Drag Built in Ethernet to the top
• Click Apply Now or Close the window
• Reboot
8
Tabla de contenidos
Manuales populares de Módem de otras marcas
US Robotics
US Robotics 3453C Manual de usuario
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario
Zte
Zte MF823 Manual de usuario
Four-Faith
Four-Faith F1403 Manual de usuario
Sierra Wireless
Sierra Wireless AIRLINK MP595W Manual de usuario
Gemtek
Gemtek WiMAX WIXFBR-103 Manual de usuario