Lukup Player X Manual de usuario
s
Quick Start Guide
Lukup Player X
What’s in the Box?
Composite Video Cable
Lukup Player X
Power Supply Unit
Lukup Remote
(Supplied outside box)
Understanding the Lukup Player X
You can control the device using Lukup Player app or Lukup Remote. Lukup Player app is a
Smartphone mobile app that can be downloaded free from Google Play store or Apple App Store
(search for ‘Lukup Player’)
Technical Specifications
1.3 GHz processor
1 GB RAM, 512 MB NAND flash
1080p60, 3D output, Multiple HD decode
Ethernet 10/100, Wi-Fi 802.11 b/g/n, Bluetooth
4.0
USB, Infra Red
HDMI in, HDMI out, Composite-Video in/out
9W power adapter (12V, 1.5A)
If you have purchased Lukup Player from our local partner for IP-Television (IPTV) services, you are
advised to raise an installation request through customer care helpline. Our representative will help
you setup the product and activate the services for you. If you have purchased the Player from local
stores or on-line for availing our Over-The-Top (OTT) services, you shall connect it to your 3rd party
broadband provider and setup yourself.
Please refer to instructions on handling Lukup Player and accessories towards the end of this guide
If you have registered as an IPTV customer through CAF (Customer Application Form), you should
have received your email address (to be used as username) and password and a link for verification
through email.
If you are an OTT subscriber, please create a subscriber account on the Lukup website if you have
not done already. Refer to steps below:
On your laptop, open a web browser and go to http://www.lukup.com
Go to ‘SUBSCRIBE’ tab on top right corner
Click on ‘Not Registered?’
Enter your email (to be used as username) and set password. Note down the registered
username and password
Select ‘Subscriber’ option from ‘Who are You?’ drop down menu
How to install the Lukup Player
Step 1:
Registration
Select “I agree to the terms and conditions” checkbox and click Register
A mail confirmation with a link to verify your registered email id will be sent to you. Click
on the link to complete your registration
Connect the Ethernet cable (RJ45) from Lukup network (IPTV) or 3rd party broadband provider (OTT)
to ‘ETHERNET’ port.
Connect Lukup Player Video output to TV. Use an HDMI cable (gives better clarity) or
CVBS/Composite video cable. Connect one end of HDMI cable to ‘HDMI OUT’ on Lukup Player and
the other end to the ‘HDMI IN’on TV. For Composite Video, connect one end to ‘VIDEO OUT’ on
Lukup Player and other end to CVBS/Composite Video IN on TV.
Connect the Power Supply Unit. Insert DC jack to ‘POWER’ on Lukup Player and the other end to the
wall socket. If the Power Supply Unit does not fit properly on wall socket, you may need to buy a
power plug converter.
Step 2:
Connect Player
Switch ON the power and select the Input/Source on TV to either of HDMI or CVBS, depending on
what you have chosen.
TV will display Lukup splash screen followed by Lukup logo with messages to prompt the status of
connectivity and actions.
You may use your Lukup Player app or TV remote to activate Lukup Player
Using Lukup Player app
On your Smartphone, open Wi-Fi settings and select ‘LUKUP’. Default password is 12345678.
To set up Lukup Player, launch Lukup Player app on your mobile phone. Launch Settings and follow
these steps in sequence
Click on ‘Settings’ ‘Connect to Lukup Player’’Connect’
Step 3:
Activate Lukup Player
T
V
You need to set up WAN network. Use mobile back button to go back to Settings.
Click on ‘Setup Network’ ‘Broadband’ ‘Auto Detect Network’
Alternately, Lukup network may require Lukup Player to have manual settings. Note, this is for
advanced users. Use option ‘Select network manually’.
To activate services on Lukup Player,
From ‘Settings’, Click on ‘Authenticate’ and enter your registered username and
password. If you have entered your credentials correctly, a message ‘Login successful’
appears on mobile app.
Click on ‘Finish’ button. Wait for 5 minutes for activation of services to complete
Open ‘Settings’‘Account Information’page to view your subscriber ID, Account
balance, Distributor ID and Account status. You may match these with what is shown in
your account page on Lukup website. Please note down the Subscriber ID for future
reference.
Using TV Remote
Setup can be done using TV Remote. Point the TV remote to Lukup Player.
On the TV remote, click on ‘Settings’‘Set Up network’ ‘Auto’
To activate services on Lukup Player,
From ‘Settings’, Click on ‘Authentication’. Submit your registered username and
password. Wait for 5 minutes for activation of services to complete.
On successful completion of activation, the home page of the Player will be displayed on TV. The
player is ready to be used with the services you have subscribed to.
Before you start using Lukup services, you need to recharge your account. If your account is already
recharged by Lukup sales representative, you will see your account page reflecting the amount.
Verify by logging in to website (http://www.lukup.com). If not, proceed to below steps:
After logging in, click on Recharge button and enter an amount equal to or more than
the plan that you wish to subscribe to, plus taxes. Available plans are listed under
https://www.lukup.com/subscribe.Click on ‘Proceed’ to Recharge. You will be directed
through a payment gateway for online transfer.
Your transaction will be available in ‘My Accounts’tab on ‘Subscriber’s menu’.
You can now subscribe to an available plan of your choice. Login to your account page, under
available subscriptions in ‘Subscriber’s Menu’ choose ‘Available Plans’ from options in drop down
menu:
Recharging and Subscribing services
Step 4:
Recharge account
Step 5:
Subscribe to a Plan
Tabla de contenidos
