Lucent Technologies Index Manual de usuario







Page 2 - Contents

INDeX Standard Telephone User's Guide 38GDE00001SAD - Issue 8 January 2000

Introduction.................................................................3

Telephone Features....................................................4

Making Calls ...............................................................6

Speed Dials, PIN's & Account Codes.........................8

Busy or Unanswered ................................................10

Answering Calls........................................................12

Transfer, Park & Hold Calls......................................13

Diverting Calls...........................................................15

Other Features..........................................................17

Voice Manager..........................................................19

Good Phone Usage ..................................................21

Glossary....................................................................22

Index .........................................................................23

Contents

Introduction – Page 3

38GDE00001SAD - Issue 8 January 2000 INDeX Standard Telephone User's Guide

Introduction

Using this Guide This guide covers the use of standard telephones on the INDeX telephone

system operating under Software Release level 9.0. Your System Manager

will be able to tell which software release your INDeX is using. The term

'standard telephones' means normal domestic telephones (and similar devices

such as fax and answer machines). For full details of the types of phone you

can use and in which phone sockets see "Telephone Features" on page 4.

What Features Can I Use?

This guide details all the features that the system supports for standard

phones. However, your phone may not be able to use all the features. Which it

can use depends on the phone's type and other settings.

Your phone may also have additional features provided by its manufacturer

(e.g. redial, stored numbers keys). This guide cannot cover those features,

instead you must refer to the phone manufacturer's information.

–Network Features:

Your phone system may be part of a network linking several sites. Where

possible, it treats network calls as internal calls and offers the same

features. However, this depends on the type of network link and type of

system at the other end of the link. Some links may be to non-INDeX

telephone systems.

Further Help

"Why don't you do

something to help me?"

Stan Laurel 1947.

In all instances, first seek help from your System Manager. They will seek

further assistance from your system's Maintainer if necessary.

System Manager:

on Extension: ...................................

This guide is also available in several computer formats (e.g. Windows Help,

Adobe Acrobat). Contact your System Manager to obtain copies or download

them from the Lucent Technologies internet site(http://www.sdxplc.com).

FT Mode Operation Versions of INDeX software before Software Level 8.0 (the version covered by

this guide) supported two modes of operation, i.e. the sequences of key

presses required for different features.

Level 8.0+ INDeX software supports only one mode of operation (equivalent

to the DT mode in previous INDeX software).

Page 4 - Telephone Features

INDeX Standard Telephone User's Guide 38GDE00001SAD - Issue 8 January 2000

Telephone Features

Which Telephone Can You Use?

The standard phone must meet the requirements listed below. You must also

only use it in the phone socket indicated by your System Manager. Standard

phones will not work in INDeX feature phone sockets and vice versa.

MF or LD Dialling

MF - Alias:

- DTMF

- Tone dialling

LD - Alias:

- Loop disconnect

Phones use either LD or MF dialling. Each time you dial a number, MF

dialling sends a pair of tones whilst LD dialling sends a series of clicks.

To enable you to use INDeX features, your Standard Telephone must be set

to MF. Standard Telephone set to MF have and #keys, plus a RECALL

key (sometimes just marked R). These keys allow you to use more of the

system's features. MF dialling also provides quicker dialling and call setup

both on the system and on the public phone network.

Many modern phones can switch to either mode. Refer to the phone

manufacturer's instruction for details of how to switch the phone between LD

and MF.

Time Break Recall

During a call, phones use a recall signal to indicate to the exchange that they

are about to send more digits. MF phones use either Time Break Recall (TBR)

or Earth Recall (ER). For an MF phone's RECALL key to workon the INDeX

system, it must use TBR. Refer to the phone manufacturer's instructions to

see how to set it to TBR.

Sharing Sockets

REN - Alias:

- Ringer equivalence

number

All standard telephone devices have a REN value. This value is a measure of

how much current they need to ring and operate properly when a call arrives.

INDeX standard telephone sockets provide a REN of 2. Thus you can share

the socket between several standard telephone devices (e.g. a phone and an

answer machine) so long as their total REN does not exceed 2

Telephone Features – Page 5

38GDE00001SAD - Issue 8 January 2000 INDeX Standard Telephone User's Guide

Telephone Tones & Ringing

The phone uses various tones and ringing to indicate calls and other events.

Incoming Calls:

–Repeated Double Ring: External call.

–Repeated Single Ring: Internal call.

During Calls:

–Repeated Single Pip: Another extension is about to intrude or has

intruded on your call.

Outgoing Calls:

–Continuous Tone: Number called unobtainable or set to no calls.

Phone locked, no external calls (or phone is barred).

–Repeated Tone: Busy number (see page 10).

–Dial Tone: Dial number.

–Repeated Single Pip: Phone on divert or no calls (see page 15).

Night Service The system takes different areas into and out of night service automatically. It

does this following timetables setup by the System Manager. The effects of

night service vary, but typically they are as follows:

–Lines: The system directs calls to a night desk number or answer phone

extension.

–Phones: The type of calls you can make becomes more restricted, e.g. no

international or long distance calls.

Dialling Timeout After you start dialling, if you do not dial another digit for several seconds the

system assumes that you have finished dialling. The system then ignores any

further digits that you dial. By default the timeout is 5 seconds though this can

be altered.

Since it is your phone that generates the audible dialling tones, the system's

dialling timeout does not affect calls connected through the system to services

that need to hear additional MF tones (e.g. voice mail systems, BT star

services, etc).

Page 6 - Making Calls

INDeX Standard Telephone User's Guide 38GDE00001SAD - Issue 8 January 2000

Making Calls

Notes on Making Calls

Your phone allows very simple and quick dialling to make calls. To simplify

dialling further, the system can store several hundred speed dials for use by

any extension. It can also store personal speed dials for your own frequently

needed numbers.

–Call Barring

On external calls, the system may bar you from dialling particular

numbers or types of numbers (e.g. national, international). Typically, call

barring increases when the system puts the phone's area into night

service. Call barring can also change according to time, date and day of

the week. As the call barring settings vary for each site, this guide cannot

fully detailed their effect.

Making External Calls

"E.T. phone home"

Steven Spielberg 1982.

Redial - Alias:

- Last number redial

- Saved number redial.

The method below uses normal dialling to make external calls. The system

may apply call barring to some or all external numbers. You can also lock your

phone by wrong passcode entry (see page 17).

To dial an external call:

1. Lift the handset and dial 9(Your System Manager will inform you if you

need to dial a different number).

2. If you hear a repeated single pip, the system requires a PIN code or

account code before allowing an external call (see page 8).

3. Dial the telephone number.

4. During the call you can do hold or transfer it (see page 13).

5. To end the call replace the handset.

To redial last external number used:

1. Lift the handset and dial # to repeat the last external number used

(including speed dials).

Making Calls – Page 7

38GDE00001SAD - Issue 8 January 2000 INDeX Standard Telephone User's Guide

Making Internal Calls

"Hello, Neil and Buzz. I'm

talking to you by telephone

from the Oval Room at the

White House, and this

certainly has to be the most

historic telephone call ever

made."

Richard Nixon 1969.

To dial an internal call:

1. Lift the handset and dial the extension or group number.

2. If you hear continuous tone, to leave your number as a message, dial 1

(see page 10 for full details).

3. If you hear just ringing, either leave a message as above or to set a

callback, dial 2(see page 11 for full details).

4. If you hear busy tone, either leave a message or set a callback as above.

Otherwise, to camp on and wait, dial 3 (see page 11 for full details).

5. To end the call, replace the handset.

Making a Page Call

Page Call - Alias:

- Broadcast

- Zone paging.

You can page any free INDeX 20 series phone or turret or group of such

phones. They hear the call without doing anything though you cannot hear

them. If wanted, they can turn the page into a normal call. If the extension

you page is diverting calls, the page also diverts (except group pages).

To page an extension or group:

1. Lift the handset and dial 7.

2. Dial the extension or group number.

3. If you hear busy or continuous tone, you can use the same options as for

a normal internal call (see page 10).

4. Speak and then replace the handset.

Hotline Operation Hotline operation allows the phone to automatically dial a number when left

off-hook for a set period. Your System Manager or maintainer controls the

settings for this feature.

Page 8 - Speed Dials, PIN's & Account Codes

INDeX Standard Telephone User's Guide 38GDE00001SAD - Issue 8 January 2000

Speed Dials, PIN's & Account Codes

Using Speed Dials

Speed Dials - Alias:

- Abbreviated dialling The system can store telephone numbers as speed dials. You can then ring

those numbers by dialling the number of the speed dial store.

–System speed dials: All extensions can use these, though call barring

may still apply. Ask your System Manager for a list.

–Personal speed dials: You can store up to 10 speed dials for your own

use (see below).

To use a speed dial:

1. Lift the handset and dial #.

2. Dial the speed dial store number (00 to 09 for personal speed dials, 100

to 899 and 9000 to 9999 for system speed dials).

3. If the phone gives a repeated single-pip, it requires a PIN or account code

before allowing the call.

4. Continue as for a normal external call (see page 6).

Storing Personal Speed Dials

If external, prefix 9to the stored number, this is the normal number to seize an

external line. Your System Manager will inform you if you have to add a

different prefix number.

To store a personal speed dial number:

1. Lift the handset and immediately dial 0.

2. Broken dial tone: Dial the speed dial store to use (00 to 09).

3. Loud pip: Dial the phone's passcode (see page 17).

You will then hear either:-

Continuous tone: Passcode wrong, replace handset. Or

Three soft-tones: Number already set, dial to cancel. Or

Single soft tone: No number set, dial a number and #. Then replace the

handset to finish.

Speed Dials, PIN's & Account Codes – Page 9

38GDE00001SAD - Issue 8 January 2000 INDeX Standard Telephone User's Guide

Forced Account Code Entry

A repeating single-pip when making an external call may indicate that you

must dial an account code before continuing (check with your System

Manager). If so, the system checks the code you dial against its list of codes

before allowing the call. The system can store up to 200 12-digit codes. Ask

your System Manager for a list of valid codes.

To enter a forced account code:

1. Dial an account code

2. If you make a mistake, dial and try again.

3. Then dial the external number required.

Forced PIN Code Entry

A repeating single-pip when making an external call may indicate that you

must dial a PIN code before continuing (check with you System Manager). If

so, the system checks the code you dial against its list of codes before

allowing the call. The PIN code you use also sets your call barring and phone

status for that call. The system stores up to 200 PIN codes of up to 6 digits.

Ask your System Manager for a list of valid PIN codes.

To enter a PIN code:

1. Dial your PIN code

2. If you make a mistake, dial and try again. You will hear either:-

-Continuous tone: Code not recognised, end the call.

-Silence: Code accepted, continue the call as normal.

Roaming PINS

Roaming PINs – Alias:

- Mobile access. You can use a PIN code and its associated phone & call barring settings to

override the restriction on another normal phone. Note that when you do this,

the system automatically forces the call to be external.

To use a roaming PIN:

1. Lift the handset and dial 6.

2. Repeated single pip: Dial your PIN code. If you make a mistake, dial

and dial the number again. You will hear either:-

-Continuous tone: Code not recognised, end the call.

-Silence: Code accepted, continue the call as normal.

Page 10 - Busy or Unanswered

INDeX Standard Telephone User's Guide 38GDE00001SAD - Issue 8 January 2000

Busy or Unanswered

If Busy or Unanswered

Your phone provides several methods for contacting an extension that is

busy, not answering or set to no calls. These option work for normal, page

and diverted calls.

–Leave a Message:

Lights the lamp of the extension called. That extension also stores (and

displays if a display phone) your number as a message to reply.

–Callback:

Rings your phone when that extension called becomes free or is next

used.

–Camp On:

Flashes the lamp on the extension called to notify them that you are

waiting. It also stops other calls interrupting you.

Leaving a Message The system can store you extension number as a message for another

extension to call you. If that extension has a message lamp, the system also

lights the lamp (supported on all INDeX phones plus some standard

telephones). If your call was diverted, the message goes to the extension from

which you were diverted.

To leave a message:

1. Dial 1.

2. Your call ends unless the extension called has already reached its limit of

five stored messages.

3. Replace the handset.

Tabla de contenidos

Otros manuales de Teléfono de Lucent Technologies

Lucent Technologies

Lucent Technologies 4412D+ Manual de usuario

Lucent Technologies

Lucent Technologies INDeX 2030 Manual de usuario

Lucent Technologies

Lucent Technologies DT3 Manual de usuario

Lucent Technologies

Lucent Technologies Definity 8410 Manual de usuario

Lucent Technologies

Lucent Technologies INDeX 20AT Manual de usuario

Lucent Technologies

Lucent Technologies Merlin Legend MLX-5 Manual de usuario

Lucent Technologies

Lucent Technologies CALLMASTER Manual de usuario

Lucent Technologies

Lucent Technologies 6225 Manual de usuario

Lucent Technologies

Lucent Technologies Definity Callmaster II Manual de usuario

Lucent Technologies

Lucent Technologies index 2030 Manual de usuario

Lucent Technologies

Lucent Technologies Merlin Legend MLX-10D Manual de usuario

Lucent Technologies

Lucent Technologies MERLIN LEGEND Release 3.1 Single-Line... Manual de usuario

Lucent Technologies

Lucent Technologies Definity 6408D+ Manual de usuario

Lucent Technologies

Lucent Technologies Definity Callmaster II Manual de usuario

Lucent Technologies

Lucent Technologies Definity 8434DX Manual de usuario

Lucent Technologies

Lucent Technologies Merlin Legend MLX-10 Manual de usuario

Lucent Technologies

Lucent Technologies 4400 series Manual de usuario

Lucent Technologies

Lucent Technologies Galilee 960a Manual de usuario

Lucent Technologies

Lucent Technologies 6400 Series Manual de usuario

Lucent Technologies

Lucent Technologies Voice Terminal 8405 Manual de usuario

Lucent Technologies

Lucent Technologies 8101 Manual de usuario

Lucent Technologies

Lucent Technologies 302A Manual de usuario

Lucent Technologies

Lucent Technologies MERLIN LEGEND MDC 9000 Manual de usuario

Lucent Technologies

Lucent Technologies MDW 9030P Guía de inicio rápido

Manuales populares de Teléfono de otras marcas

GE 2-9480 Manual de usuario

Geemarc

Geemarc PHOTOPHONE 155 Manual de usuario

D-Link

D-Link DWR-720/PW Manual de usuario

Interquartz

Interquartz Gemini IQ333 Manual de usuario

SSS Siedle

SSS Siedle HT 840-0 Manual de usuario

Motorola

Motorola TITANIUM Manual de usuario

Panasonic

Panasonic ICX Manual de usuario

LG H870DS Manual de usuario

Samsung

Samsung GT-I9500 Manual de usuario

AT&T

AT&T Trimline 205 Manual de usuario

Selta

Selta zenyth 600 Manual de usuario

Doro

Doro AFTI 20 Manual de usuario

UNIQCELL

UNIQCELL A1 Manual de usuario

Panasonic

Panasonic KX Series Manual de usuario

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manual de usuario

BT Decor 425 Manual de usuario

NEC

NEC SV8500 Manual de usuario

Teledex

Teledex PEARL Manual de usuario