LTS POE-SW401 Manual de usuario
POE-SW401/POE-SW801
User Manual
User manual of POE-SW401/POE-SW801
1
User Manual
About this Manual
This Manual is applicable to POE-SW401/POE-SW801.
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other
information hereinafter are for description and explanation only. The information contained in the Manual is
subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the
company website
Please use this user manual under the guidance of professionals.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND OUR COMPANY MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY
QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL
OUR COMPANY, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH
THE USE OF THIS PRODUCT, EVEN IF OUR COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN
RISKS. OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE
OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER
INTERNET SECURITY RISKS; HOWEVER, OUR COMPANY WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION
BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. OUR
COMPANY SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
User manual of POE-SW401/POE-SW801
2
Regulatory Information
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the
user may be required to take adequate measures.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a
shielded RJ45 cable.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a
shielded RJ45 cable.
IC
CAN ICES-3（A）/NMB-3（A）
User manual of POE-SW401/POE-SW801
3
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to avoid danger or property
loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are neglected.
Warnings
●Proper configuration of all passwords and other security settings is the responsibility of the installer and/or
end-user.
●In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation
and region. Please refer to technical specifications for detailed information.
●Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with
100~240 VAC or 12 VDC according to the IEC60950-1 standard. Please refer to technical specifications for
detailed information.
●Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire
hazard.
●Please make sure that the plug is firmly connected to the power socket.
●If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then
please contact the service center.
Warnings Follow these safeguards to
prevent serious injury or death.
Cautions Follow these precautions to
prevent potential injury or material
damage.
User manual of POE-SW401/POE-SW801
4
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
•Ensure unit is installed in a well-ventilated, dust-free environment.
•Unit is designed for indoor use only.
•Keep all liquids away from the device.
•Ensure environmental conditions meet factory specifications.
•Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of dropping it
may cause damage to the sensitive electronics within the unit.
•Use the device in conjunction with an UPS if possible.
•Power down the unit before connecting and disconnecting accessories and peripherals.
•A factory recommended HDD should be used for this device.
•Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or
equivalent type only. Dispose of used batteries according to the instructions provided by the battery
manufacturer.
User manual of POE-SW401/POE-SW801
5
Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer.
The figures in the manual are for reference only.
This manual is applicable to the models listed in the following table.
Model
POE-SW401
POE-SW801
User manual of POE-SW401/POE-SW801
6
TABLE OF CONTENTS
TABLE OF CONTENTS ................................................................................................................................. 6
Chapter 1 Product Overview ............................................................................................................ 7
1.1 Introduction..................................................................................................................................... 7
1.2 Packages Content ............................................................................................................................ 7
1.3 Front Panel ...................................................................................................................................... 8
1.4 Rear Panel........................................................................................................................................ 9
Chapter 2 Device Installation ..........................................................................................................11
2.1 Installation Notes........................................................................................................................... 11
Safety Alert....................................................................................................................................... 11
Environmental Requests................................................................................................................... 11
2.2 Installation..................................................................................................................................... 12
Desktop-mounting ........................................................................................................................... 12
Wall-mounting ................................................................................................................................. 12
2.3 Grounding...................................................................................................................................... 14
With grounding bar.......................................................................................................................... 14
Without grounding bar .................................................................................................................... 14
Chapter 3 Physical Connection........................................................................................................16
3.1 Connect to RJ45 Ports.................................................................................................................... 16
3.2 Check the Cabling .......................................................................................................................... 16
3.3 Connect to Power Supply .............................................................................................................. 17
Appendix Technical Specifications.............................................................................................................18
User manual of POE-SW401/POE-SW801
7
Chapter 1 Product Overview
1.1 Introduction
POE-SW401/POE-SW801 is a series of 10/100Mbps desktop PoE switch. It provides 5/9 10/100Mbps
auto-negotiation RJ45 ports, in which ports 1-4/8 support IEEE 802.3af PoE (15.4W) and IEEE 802.3at PoE+ (30W).
The whole PoE power output is 58W/120W. With Cat 5 Ethernet cable, power and data can be simultaneously
transmitted to APs, IP cameras, IP phones, and other PDs (Power devices).
In addition, POE-SW401/POE-SW801 supports Extend mode. With enabling extend mode and Cat 5e Ethernet
cable, the transmission distance of data and power can be up to 250m.
1.2 Packages Content
Open your package and check the followings.
Item
Number
Switch
1
Power adapter
1
Footpads
4
Screws
2
Expansion screw tubes
2
User Manual
1
If any item is incorrect, missing, or damaged, please keep the original package and contact the vendor for
replacement immediately.
User manual of POE-SW401/POE-SW801
8
1.3 Front Panel
Figure 1.1 POE-SW401
Figure 1.2 POE-SW801
Table 1. 1 Description of LEDs
LED
Status
Description
PWR
Solid
The device is connected to the power supply properly.
Off
The device is connected improperly or not connected to the power
supply.
POE-MAX
Solid
The PoE power gets to the alarm value, and the available PoE power
is less than 6W.
Blinking
The PoE power gets to the maximum.
Off
The PoE power works properly, and the available PoE power is more
than 6W.
LINK/ACT
Solid
The corresponding port is connected properly.
Blinking
The corresponding port is transmitting data.
Off
The corresponding port is connected improperly or not connected.
POE STATUS
Solid
The corresponding port is connected with a PD (Powered Device)
and powers the PD properly.
Blinking
The PoE output of the corresponding port exceeds 30W.
Off
The corresponding port is no PoE power output or no PD
connected.
N/A
Off
For reservation
User manual of POE-SW401/POE-SW801
9
Extend Mode
Details for enabling extend mode:
Model
Name
Status
Description
POE-SW401
EXTEND
Off
Ports 1-4: 100M
ON
Ports 1-4: 10M with Extend Mode being enabled
POE-SW801
Off
Ports 1-8: 100M
ON
Ports 1-8: 10M with Extend Mode being enabled
Cautions
1. To guarantee the extend mode performance, please use Cat 5e or better Ethernet cable and configure the
speed and duplex of the remote device to be “Auto Negotiation”.
2. If Extend mode is OFF, the transmission distance of PoE powering and data is up to 150m by using Cat 5e or
better Ethernet cable.
RJ45 ports
Model
10/100Mbps RJ45 ports
Uplink port
POE-SW401
4
1
POE-SW801
8
1
Note that:
1. Ports 1-2 of POE-SW801 (Port 1 of POE-SW401) are with high priority by default, which take advantage over
other ports to process key data or video data.
2. Ports 1-4/8 support IEEE 802.3af and IEEE 802.3at PoE power;
1.4 Rear Panel
Figure 1.3 POE-SW401
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cambiar de LTS
