LST AD-58000-400 Manual de usuario
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
AD-58000-400_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
Thermal Detector
AD-58000-400
• ADM loop technology with
Apollo/Discovery protocol
• For use as maximum heat or
rate-of-rise heat detector
• 5 different operating modes
selectable
• Optional connection of remote
indicator
• Sealed electronics
Description
The addressable Thermal Detector AD-58000-400 is
based on the heat principle and was developed for the
indoor temperature supervision in a wide range of fi re
detection applications.
Depending on the parameter setup in the fi re detection
control panel, the detector operates either as maximum
heat detector with an alarm temperature of 61°C (EN
54-5 Class A2S) or 90°C (EN 54-5 Class CS), or as
rate-of-rise heat detector with a maximum temperature
of 58°C (EN 54-5 Class A1R), 61°C (EN 54-5 Class A2)
or 90°C (EN 54-5 Class CR). In Class A1R the detector
can be used up to a room height of 7.5m, in the other
operating modes a room height of 6m is permissible.
The proven ADM loop technology with Apollo/Discovery
protocol establishes a permanent communication bet-
ween the fi re detection control panel and the detector.
That ensures a periodical function testing of the detec-
tor. Fires are safely detected in the control panel by
continuously analysing the measured values.
The two LEDs with 360° visibility indicate the activated
condition of the detector. The detector address is se-
lected by means of a code card in the detector base.
Therefore the detector can be changed without additi-
onal tools.
The detector can be attached to various bases and it
can be protected against theft.
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
AD-58000-400_DBL_LST_EN_0804.PDF • PAGE 2
ABuilding Safety. Building Security.
Operating voltage Supply through loop voltage
Current consumption typ. 500µA (quiescent)
Alarm temperature typ. 58°C (Class A1R, max. room height 7.5m)
typ. 61°C (Class A2/A2S, max. room height 6m)
typ. 90°C (Class CR/CS, max. room height 6m)
Operating temperature max. +50°C (Class A1R, A2 and A2S)
max. +80°C (Class CR and CS)
Ambient temperature -20°C to +80°C (continuous operation, no condensation or icing)
Relative humidity 0 – 95% (no condensation)
Dimensions ø × H 100 × 42 (mm)
Colour white
Weight 105g
Approval VdS G299039
Order number 242028
Order name Thermal Detector/Anal./Disc/Apo AD-58000-400
Specifi cations
Otros manuales de Sensor de seguridad de LST
LST
LST ECO1000 Manual de usuario
LST
LST ASR-45681-242 Manual de usuario
LST
LST 5451EIS Manual de usuario
LST
LST AISA-45681-321 Manual de usuario
LST
LST 5351E Manual de usuario
LST
LST FI750/RF/OT Manual de usuario
LST
LST IR2 16581 Manual de usuario
LST
LST 2351TEM Manual de usuario
LST
LST Series 65/XP95 Manual de usuario
LST
LST Orbis RB-10004 Manual de usuario
LST
LST 4351E Manual de usuario
LST
LST Series FC600 Manual de usuario
LST
LST 5351TE Manual de usuario
LST
LST AMS-58000-700 Manual de usuario
LST
LST FTX-P1 Manual de usuario
LST
LST 5251EM Manual de usuario
LST
LST Orbis 246042 Manual de usuario
LST
LST AW-55000-420 Manual de usuario
LST
LST ECO1000BREL24L Manual de usuario
LST
LST ASA-45681-210 Manual de usuario
