LST 5251EM Manual de usuario
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
5251EM_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
Thermal Detector
5251EM
Description
The addressable Thermal Detector 5251EM is based
on the heat principle and was developed for the indoor
temperature supervision in a wide range of fi re detec-
tion applications.
When used with a Fire Detection Control Panel Series
BC216, the detector can operate either as maximum
heat detector with alarm temperature 58°C (EN 54-5
Class A1S) or alarm temperature 78°C (EN 54-5 Class
BS), or as rate-of-rise heat detector with a maximum
temperature of 58°C (EN 54-5 Class A1R).
The proven ADM loop technology with System Sen-
sor/200 protocol establishes a permanent communi-
cation between the fi re detection control panel and the
detector. That ensures a periodical function testing of
the detector. Fires are safely detected in the control
panel by continuously analysing the measured values.
The two LEDs with 360° visibility indicate the activated
condition of the detector. The detector address is se-
lected with two decadic rotary switches, thus allowing
to change the detector without additional tools.
A detector function test can be conveniently conducted
using a magnet or a detector test device. The detector
can be attached to various bases and it can be protec-
ted against theft.
• ADM loop technology with
System Sensor/200 protocol
• For use as maximum heat or
rate-of-rise heat detector
• Alarm temperature 58°C or 78°C
software selectable
• Optional connection of remote
indicator
• Function testable with magnet
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
5251EM_DBL_LST_EN_0804.PDF • PAGE 2
ABuilding Safety. Building Security.
Specifi cations
Operating voltage Supply through loop voltage
Current consumption max. 200µA (quiescent)
Alarm temperature
Class A1S typ. 58°C (maximum principle), max. room height 7.5m
Class A1R typ. 58°C (rate-of-rise principle), max. room height 7.5m
Class BS typ. 78°C (maximum principle), max. room height 6m
Operating temperature
Classes A1S and A1R max. +45°C
Class BS max. +68°C
Ambient temperature -20°C to +60°C (continuous operation)
Relative humidity 10 – 93% (no condensation)
Dimensions ø × H 102 × 51 (mm)
Colour cream
Weight 102g
Approval VdS G200094
Order number 242002
Order name Thermal Detector/Anal./200/SS 5251EM
Otros manuales de Sensor de seguridad de LST
LST
LST Series FC600 Manual de usuario
LST
LST 246100 Manual de usuario
LST
LST 5351TE Manual de usuario
LST
LST 5351E Manual de usuario
LST
LST Series 65/XP95 Manual de usuario
LST
LST FI750/RF/OT Manual de usuario
LST
LST Series 200 Manual de usuario
LST
LST 2251CTLE Manual de usuario
LST
LST ECO1000 Manual de usuario
LST
LST 5451EIS Manual de usuario
LST
LST ECO1000BREL24L Manual de usuario
LST
LST 200 Series Manual de usuario
LST
LST 2351TEM Manual de usuario
LST
LST UVIR2 16591 Manual de usuario
LST
LST AMS-58000-700 Manual de usuario
LST
LST Orbis RB-10004 Manual de usuario
LST
LST 16589 Manual de usuario
LST
LST FTX-P1 Manual de usuario
LST
LST B524IEFT-1 Manual de usuario
LST
LST FI750/RF/OT Manual de usuario
