LSI LSI53C895A Manual de usuario

S14028.B

LSI53C895A

PCI to Ultra2

SCSI Controller

TECHNICAL

MANUAL

April 2001

Version 2.2

This document contains proprietary information of LSI Logic Corporation. The

information contained herein is not to be used by or disclosed to third parties

without the express written permission of an officer of LSI Logic Corporation.

LSI Logic products are not intended for use in life-support appliances, devices,

or systems. Use of any LSI Logic product in such applications without written

consent of the appropriate LSI Logic officer is prohibited.

Document DB14-000089-03, Fourth Edition (April 2001)

This document describes the LSI Logic LSI53C895A PCI to Ultra2 SCSI

Controller and will remain the official reference source for all revisions/releases

of this product until rescinded by an update.

To receive product literature, visit us at http://www.lsilogic.com.

LSI Logic Corporation reserves the right to make changes to any products herein

at any time without notice. LSI Logic does not assume any responsibility or

liability arising out of the application or use of any product described herein,

except as expressly agreed to in writing by LSI Logic; nor does the purchase or

use of a product from LSI Logic convey a license under any patent rights,

copyrights, trademark rights, or any other of the intellectual property rights of

LSI Logic or third parties.

Ultra SCSI is the term used by the SCSI Trade Association (STA) to describe

Fast-20 SCSI, as documented in the SCSI-3 Fast-20 Parallel Interface standard,

X3,277-199X.

Ultra2 SCSI is the term used by the SCSI Trade Association (STA) to describe

Fast-40 SCSI, as documented in the SCSI Parallel Interface-2 standard, (SPI-2)

X3710-1142D.

TRADEMARK ACKNOWLEDGMENT

The LSI Logic logo design, TolerANT, LVDlink, and SCRIPTS are registered

trademarks or trademarks of LSI Logic Corporation. All other brand and product

names may be trademarks of their respective companies.

SR/HH

Preface iii

Preface

This book is the primary reference and technical manual for the

LSI53C895A PCI to Ultra2 SCSI Controller. It contains a complete

functional description for the product and also includes complete physical

and electrical specifications.

Audience

This manual provides reference information on the LSI53C895A PCI to

Ultra2 SCSI Controller. It is intended for system designers and

programmers who are using this device to design an Ultra2 SCSI port for

PCI-based personal computers, workstations, servers or embedded

applications.

Organization

This document has the following chapters and appendixes:

•Chapter 1, General Description,includes general information about

the LSI53C895A.

•Chapter 2, Functional Description, describes the main functional

areas of the chip in more detail, including interfaces to the SCSI bus

and external memory.

•Chapter 3, Signal Descriptions, contains pin diagrams and signal

descriptions.

•Chapter 4, Registers, describes each bit in the operating registers,

and is organized by register address.

•Chapter 5, SCSI SCRIPTS Instruction Set, defines all of the SCSI

SCRIPTS instructions that are supported by the LSI53C895A.

iv Preface

•Chapter 6, Electrical Specifications, contains the electrical

characteristics and AC timing diagrams.

•Appendix A, Register Summary, is a register summary.

•Appendix B, External Memory Interface Diagram Examples,

contains several example interface drawings for connecting the

LSI53C895A to external ROMs.

Related Publications

For background information, please contact:

ANSI

11 West 42nd Street

New York, NY 10036

(212) 642-4900

Ask for document number X3.131-199X (SCSI-2)

Global Engineering Documents

15 Inverness Way East

Englewood, CO 80112

(800) 854-7179 or (303) 397-7956 (outside U.S.) FAX (303) 397-2740

Ask for document number X3.131-1994 (SCSI-2); X3.253

(SCSI-3 Parallel Interface)

ENDL Publications

14426 Black Walnut Court

Saratoga, CA 95070

(408) 867-6642

Document names: SCSI Bench Reference, SCSI Encyclopedia,

SCSI Tutor

Prentice Hall

113 Sylvan Avenue

Englewood Cliffs, NJ 07632

(800) 947-7700

Ask for document number ISBN 0-13-796855-8, SCSI: Understanding

the Small Computer System Interface

Preface v

LSI Logic World Wide Web Home Page

www.lsilogic.com

PCI Special Interest Group

2575 N.E. Katherine

Hillsboro, OR 97214

(800) 433-5177; (503) 693-6232 (International); FAX (503) 693-8344

Conventions Used in This Manual

The word assert means to drive a signal true or active. The word

deassert means to drive a signal false or inactive.

Hexadecimal numbers are indicated by the prefix “0x” —for example,

0x32CF. Binary numbers are indicated by the prefix “0b” —for example,

0b0011.0010.1100.1111.

Revision Record

Revision Date Remarks

0.5 4/99 Advance information version of the manual.

1.0 7/99 Preliminary version of the manual.

1.1 9/99 PCI timings corrected in Chapter 6, Table 6.3, and Figure 6.41 corrected.

2.0 2/00 Final version.

2.1 7/00 Added Figure 6.43.

2.2 4/01 All product names changed from SYM to LSI. Updated DC electrical

specifications and test conditions.

vi Preface

Contents vii

Contents

Chapter 1 General Description

1.1 New Features in the LSI53C895A 1-3

1.2 Benefits of Ultra2 SCSI 1-4

1.3 Benefits of LVDlink 1-4

1.4 TolerANT®Technology 1-5

1.5 LSI53C895A Benefits Summary 1-6

1.5.1 SCSI Performance 1-6

1.5.2 PCI Performance 1-7

1.5.3 Integration 1-8

1.5.4 Ease of Use 1-8

1.5.5 Flexibility 1-9

1.5.6 Reliability 1-9

1.5.7 Testability 1-10

Chapter 2 Functional Description

2.1 PCI Functional Description 2-2

2.1.1 PCI Addressing 2-2

2.1.2 PCI Bus Commands and Functions Supported 2-4

2.1.3 PCI Cache Mode 2-9

2.2 SCSI Functional Description 2-18

2.2.1 SCRIPTS Processor 2-19

2.2.2 Internal SCRIPTS RAM 2-20

2.2.3 64-Bit Addressing in SCRIPTS 2-21

2.2.4 Hardware Control of SCSI Activity LED 2-21

2.2.5 Designing an Ultra2 SCSI System 2-22

2.2.6 Prefetching SCRIPTS Instructions 2-23

2.2.7 Opcode Fetch Burst Capability 2-24

2.2.8 Load and Store Instructions 2-24

2.2.9 JTAG Boundary Scan Testing 2-25

viii Contents

2.2.10 SCSI Loopback Mode 2-26

2.2.11 Parity Options 2-26

2.2.12 DMA FIFO 2-29

2.2.13 SCSI Bus Interface 2-34

2.2.14 Select/Reselect During Selection/Reselection 2-39

2.2.15 Synchronous Operation 2-40

2.2.16 Interrupt Handling 2-43

2.2.17 Interrupt Routing 2-50

2.2.18 Chained Block Moves 2-51

2.3 Parallel ROM Interface 2-55

2.4 Serial EEPROM Interface 2-57

2.4.1 Default Download Mode 2-57

2.4.2 No Download Mode 2-58

2.5 Alternative SSVID/SSID Loading Mechanism 2-58

2.6 Power Management 2-60

2.6.1 Power State D0 2-61

2.6.2 Power State D1 2-61

2.6.3 Power State D2 2-62

2.6.4 Power State D3 2-62

Chapter 3 Signal Descriptions

3.1 LSI53C895A Functional Signal Grouping 3-2

3.2 Signal Descriptions 3-3

3.2.1 Internal Pull-ups on LSI53C895A Signals 3-3

3.3 PCI Bus Interface Signals 3-4

3.3.1 System Signals 3-4

3.3.2 Address and Data Signals 3-5

3.3.3 Interface Control Signals 3-6

3.3.4 Arbitration Signals 3-8

3.3.5 Error Reporting Signals 3-8

3.3.6 Interrupt Signals 3-9

3.3.7 SCSI GPIO Signals 3-10

3.4 SCSI Bus Interface Signals 3-11

3.4.1 SCSI Bus Interface Signal 3-11

3.4.2 SCSI Signals 3-12

3.4.3 SCSI Control Signals 3-13

3.5 Flash ROM and Memory Interface Signals 3-14

Contents ix

3.6 Test Interface Signals 3-16

3.7 Power and Ground Signals 3-17

3.8 MAD Bus Programming 3-19

Chapter 4 Registers

4.1 PCI Configuration Registers 4-1

4.2 SCSI Registers 4-19

4.3 64-Bit SCRIPTS Selectors 4-104

4.4 Phase Mismatch Jump Registers 4-108

Chapter 5 SCSI SCRIPTS Instruction Set

5.1 Low Level Register Interface Mode 5-1

5.2 High Level SCSI SCRIPTS Mode 5-2

5.2.1 Sample Operation 5-3

5.3 Block Move Instruction 5-5

5.3.1 First Dword 5-6

5.3.2 Second Dword 5-12

5.4 I/O Instruction 5-13

5.4.1 First Dword 5-13

5.4.2 Second Dword 5-21

5.5 Read/Write Instructions 5-22

5.5.1 First Dword 5-22

5.5.2 Second Dword 5-23

5.5.3 Read-Modify-Write Cycles 5-23

5.5.4 Move To/From SFBR Cycles 5-24

5.6 Transfer Control Instructions 5-26

5.6.1 First Dword 5-26

5.6.2 Second Dword 5-32

5.7 Memory Move Instructions 5-32

5.7.1 First Dword 5-33

5.7.2 Read/Write System Memory from SCRIPTS 5-34

5.7.3 Second Dword 5-34

5.7.4 Third Dword 5-35

5.8 Load and Store Instructions 5-35

5.8.1 First Dword 5-36

5.8.2 Second Dword 5-37

xContents

Chapter 6 Electrical Specifications

6.1 DC Characteristics 6-1

6.2 TolerANT Technology Electrical Characteristics 6-8

6.3 AC Characteristics 6-12

6.4 PCI and External Memory Interface Timing Diagrams 6-14

6.4.1 Target Timing 6-15

6.4.2 Initiator Timing 6-22

6.4.3 External Memory Timing 6-39

6.5 SCSI Timing Diagrams 6-56

6.6 Package Diagrams 6-64

6.6.1 LSI53C895A vs. LSI53C895 Pin/Ball Differences 6-71

Appendix A Register Summary

Appendix B External Memory Interface Diagram Examples

Index

Customer Feedback

Figures 1.1 Typical LSI53C895A System Application 1-2

1.2 Typical LSI53C895A Board Application 1-3

2.1 LSI53C895A Block Diagram 2-2

2.2 Parity Checking/Generation 2-29

2.3 DMA FIFO Sections 2-30

2.4 LSI53C895A Host Interface SCSI Data Paths 2-31

2.5 8-Bit HVD Wiring Diagram for Ultra2 SCSI 2-37

2.6 Regulated Termination for Ultra2 SCSI 2-39

2.7 Determining the Synchronous Transfer Rate 2-41

2.8 Block Move and Chained Block Move Instructions 2-52

3.1 LSI53C895A Functional Signal Grouping 3-2

5.1 SCRIPTS Overview 5-5

6.1 LVD Driver 6-3

6.2 LVD Receiver 6-4

Tabla de contenidos

Otros manuales de Controladores de LSI

LSI

LSI MegaRAID SAS 9260-16i RAID Controller Manual de usuario

LSI

LSI MTY-0.5A Manual

LSI

LSI LSISAS1068 Manual de usuario

LSI

LSI MegaRAID SATA 8308ELP Manual de usuario

LSI

LSI MegaRAID SCSI 320-1 Manual de usuario

LSI

LSI LS7280 Manual de usuario

LSI

LSI MegaRAID SAS 9240-4i Manual de usuario

LSI

LSI LSI53C1030 Manual de usuario

LSI

LSI MegaRAID SATA150-2 Manual de usuario

LSI

LSI LSI53C876 Manual de usuario

LSI

LSI MegaRAID SATA 300-8XLP Manual de usuario

LSI

LSI LSI53C1510 Manual de usuario

LSI

LSI MegaRAID SAS 9361-4i Manual de usuario

LSI

LSI 3ware 9690SA Guía de referencia

LSI

LSI LSI53C1000 Manual de usuario

LSI

LSI MegaRAID SCSI 320-0 Zero-Channel RAID Controller Series... Instrucciones de instalación

LSI

LSI LSI53C896 Manual de usuario

LSI

LSI MegaRAID Express 300 Manual de usuario

LSI

LSI MegaRAID SCSI 320-0 Zero-Channel RAID Controller Series... Guía rápida

LSI

LSI MegaRAID SAS 9260CV-4i Manual de usuario

LSI

LSI MegaRAID SAS 9271-4i Manual de usuario

LSI

LSI MegaRAID SCSI 320-2E Manual de usuario

LSI

LSI MegaRAID SAS 8300XLP Manual de usuario

LSI

LSI 3ware 9750 Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario