LS Industrial Systems IG5A Series Manual de programación

0.4~22kW(200V/400V)

AC Variable Speed Drive

iG5ATroubleshooting Manual

Read this manual carefully before servicing or inspecting this equipment.

Keepthis manual within easy reach for quick reference.

Safety Instructions

Quick Reference Table

The following table contains situations frequently encountered by users while working with inverters.

Refer to the typical and practical situations in the table to quickly and easily locate answers to your

questions.

Situation

Reference

The motor is too noisy.

P. 32

I want to review recent fault trip and warning histories.

P. 15

The motor runs too hot.

P. 29

The cooling fan does not work.

P. 33

I want to know how can I keep the inverter when I don`t use it.

P. 44

ERR message is displaying on keypad.

P. 19

I want to initialize the parameter.

P. 13

I want to scrap the inverter.

P. 44

I want to review the input/output module.

P. 38

I want to change the FAN when it exceed replacement period

P. 42

I want to change the carrier frequency.

P. 12

I cannot set the parameter.

P. 28

The motor does not work.

P. 32

The motor stop when it accelerate the speed or connect the load.

P. 30

Contents

INTRODUCTION 3

Manual Composition 3

PRODUCTIDENTIFICATION 4

ASSOCIATION MANUAL 4

SAFETYINFORMATION 5

REVISION RECORD 7

1BASIC CHECKLIST 8

1.1 Before You Think It Is Failure 8

1.2 Basic Operations 10

1.3 Parameter Change 12

1.3.1 Carrier Frequency Change 12

1.3.2 InitializingAll Parameters 13

1.3.3 Read and Write Parameters 14

1.4 Fault Trip Monitoring 15

2TROUBLESHOOTING 18

2.1 Trips andWarnings 18

2.1.1 Fault/Warning List 19

2.1.2 Troubleshooting Fault Trips 21

2.2 Troubleshooting Other Faults 28

3MAINTENANCE 34

3.1 Regular Inspection Lists 35

3.1.1 DailyInspections 35

3.1.2 Annual inspections 36

3.1.3 Bi-annual Inspections 37

3.1.4 Checking the Input/Output Modules 38

3.1.5 Replacement of the cooling fan 42

3.2 Storage and disposal 44

3.2.1 Storage 44

3.2.2 Disposal 44

Introduction

Manual Composition

1.1 Before You Think It Is Failure

1.2 Basic Operations

1.3 Parameter Change

1.3.1Carrier Frequency Change

1.3.2InitializingAll Parameters

1.3.3Read andWrite Parameters

1.4 Fault Trip Monitoring

2.1 Trips and Warnings

2.1.1Fault/Warning List

2.1.2Troubleshooting Fault Trips

2.2 Troubleshooting Other Faults

3.1 Regular Inspection Lists

3.1.1Daily Inspections

3.1.2Annual inspections

3.1.3Bi-annual Inspections

3.1.4Checking the Input/Output Modules

3.1.5 Replacement of the cooling fan

3.2 Storage and disposal

3.2.1Storage

3.2.2Disposal

There are troubleshooting fault trips &

other faults in these pages.

If problems are not resolved, please

contact your vendor or LSIS.

There are the regular inspection

lists in these pages.

When the problem of inverter occur,

please check the input/output

module that is basic hardware

check method.

When the problem of inverter occur,

you can check the basic checklist

before you think it is failure in these

pages.

check the set-up of parameter using

basic operations first and then

check the trip record.

1 Basic Checklist

Basic Checklist

2 Troubleshooting

3Maintenance

Product Identification

Association Manual

iG5Auser manual can be download through the homepage of LSIS.

Link : http://www.lsis.com/support/download/

Modelname

Powersource

specifications

Output

specifications

SV 055 iG5A- 2

004-0.4kw 055-5.5kw

008-0.75kw 075-7.5kw

015-1.5kw 110-11.0kw

022-2.2kw 150-15.0kw

037-3.7kw 185-18.5kw

040-4.0kw 220-22.0kw

Motor capacity

1- Single phase 200~230[V]

2- 3 phase

200~230[V]

4- 3 phase

Input voltage

Series name

Safety Information

Read and follow all safety instructions in this manual precisely to avoid unsafe operating conditions,

property damage, personal injury, or death.

Safety symbols in this manual

Danger

Indicates an imminently hazardoussituation which, if not avoided, willresult in severe injury or death.

Warning

Indicates a potentiallyhazardous situation which, if not avoided, couldresult in injuryordeath

Caution

Indicates a potentially hazardous situation that, if not avoided, could result in minor injury or property

damage.

Safety information

Danger

Do not open the cover of the equipment while it is on or operating. Likewise, do not operate the

inverter while the cover is open. Exposure of high voltage terminals or charging area to the external

environment may result in an electric shock. Do not remove anycovers or touch the internal circuit

boards (PCBs) or electricalcontacts on the product when the power is on or during operation.

Doing so may result in serious injury, death, or serious property damage.

Do not open the cover of the equipment even when the power supply to the inverter has been

turnedoff unlessit is necessaryfor maintenance or regular inspection. Opening the cover may

result in an electric shock even when thepower supply isoff.

The equipment may hold charge long after the power supply has been turned off. Use a multi-meter

to make sure that there is no voltage before working on the inverter, motor or motor cable.

Warning

This equipment must be grounded for safe and proper operation.

Do not supply power to a faulty inverter. If you find that the inverter is faulty, disconnect the power

supply and have the inverter professionally repaired.

The inverter becomes hot during operation.Avoid touching the inverter until it has cooled to avoid

burns.

Do not allowforeignobjects, such as screws, metal chips, debris, water, or oil to get inside the

inverter.Allowing foreign objects inside the inverter maycause the inverter to malfunction or result in

a fire.

Do not operate the inverter with wet hands. Doing so mayresult in electric shock.

Caution

Do not modify the interior workings of the inverter. Doing so will void the warranty.

The inverter is designed for 3-phase motor operation. Do not use the inverter to operate a single

phase motor.

Do not place heavy objects on top of electric cables. Doing so may damage the cable and result in

an electric shock.

Revision Record

Version

Date

Changed main

contents

Association page

V1.0

2015.03

First edition

1 Basic Checklist

1.1 Before You Think It Is Failure

Items

Check Point

Result

Installation

Location/

Input/Output

voltage

Is the installation location appropriate?

Does the environment meet the inverter’s operating conditions?

Does the power source match the inverter’s rated input?

Is the inverter’s rated output sufficient to supply the equipment?

PowerTerminal

Wiring

Is a circuit breaker installed on the input side of the inverter?

Is the circuit breaker correctly rated?

Are the power source cables correctly connected to the R/S/T

terminals of the inverter?

(Caution: connecting the power source to the U/V/W terminals may

damage the inverter.)

Are the motor output cables connected in the correct phase rotation

(U/V/W)?

(Caution: motors will rotate in reverse direction if three phase cables

are not wired in the correct rotation.)

Are the cables used in the power terminal connections correctly rated?

Is the invertergrounded correctly?

Are the power terminal screws and the ground terminal screws

tightened to their specified torques?

Are the overload protection circuits installed correctly on the motors (if

multiple motors are run using one inverter)?

Is the inverterseparated from the power source by a magnetic

contactor (if a braking resistor is in use)?

Are advanced-phase capacitors, surge protection and electromagnetic

interference filters installed correctly?

(These devices MUST not be installed on the output side of the

inverter.)

1. Basic Checklist

Items

Check Point

Result

Control

TerminalWiring

Are STP(shielded twisted pair) cables used for control terminal wiring?

Is the shielding of the STP wiring properlygrounded?

If 3-wire operation is required, are the multi-function input terminals

defined prior to the installation of the control wiring connections?

Are the control cables properly wired?

Are the control terminal screws tightened to their specified torques?

Is the total cable length of all control wiring < 165ft (50m)?

Is the total length of safety wiring < 100ft (30m)?

Miscellaneous

Are optional cards connected correctly?

Is there any debris left inside the inverter?

Are any cables contacting adjacent terminals, creating a potentialshort

circuit risk?

Are the control terminal connections separated from the power

terminal connections?

Have the capacitors been replaced if they have been in use for > 2

years?

Has afuse been installed for the power source?

Are the connections to the motor separated from other connections?

Otros manuales para iG5A Series

Tabla de contenidos

Otros manuales de Inversor de LS Industrial Systems

LS Industrial Systems

LS Industrial Systems SV-iS7 Series Manual de usuario

LS Industrial Systems

LS Industrial Systems iS7 RAPIEnet Manual de usuario

LS Industrial Systems

LS Industrial Systems STARVERT iG5A Manual de usuario

LS Industrial Systems

LS Industrial Systems LSLV-S100 Manual de usuario

LS Industrial Systems

LS Industrial Systems SV iC5 Series Manual de operación

LS Industrial Systems

LS Industrial Systems SV-iV5 Series Manual de usuario

LS Industrial Systems

LS Industrial Systems SV-iE5 Series Manual de usuario

Manuales populares de Inversor de otras marcas

Fourgroup

Fourgroup Easy Manual de usuario

Velleman

Velleman PI300M Manual de usuario

Sungrow

Sungrow SG350HX-US Manual de usuario

WilTec

WilTec 61897 Manual de usuario

SMA

SMA SUNNY BOY STORAGE 2.5 Manual de usuario

Simplicity

Simplicity LANDLORD 316 Manual de usuario

Santak

Santak SMAX 3000 Manual de usuario

ATON

ATON RA.Store-3 Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manual de usuario

Tektronix

Tektronix CFG250 Manual de usuario

Champion

Champion 200989 Manual de usuario

Vanner

Vanner 20-500 Series Manual de usuario

GE GEP Manual de usuario

Astrel Group

Astrel Group Power Reducer Guía rápida

MULTIQUIP

MULTIQUIP GDP-5H Guía

GoWISE

GoWISE PS1007 Manual de usuario

Promate

Promate PM13500D ES Manual de usuario

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manual de usuario

LS Industrial Systems iG5A Series Manual de programación

Manuales populares de Inversor de otras marcas