Lorex P10 LNZ44P12 Manual de usuario
Instruction Manual
PTZ Series
P10
LNZ44P12 4MP IP
PTZ Camera
Thank you for purchasing this product. Lorex is committed to
providing our customers with a high quality, reliable security
solution.
This manual refers to the following model:
LNZ44P12
For the latest online manual, downloads and product updates, and
to learn about our complete line of accessory products, please visit
our website at:
lorextechnology.com
WARNING
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
#; r. 4.0/47037/47040; en-US
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of
uninsulated "dangerous voltage" within the
product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF THE PLUG TO THE WIDE
SLOT AND FULLY INSERT.
#; r. 4.0/47037/47040; en-US
Table of contents
1 Safety Instructions ...... ....... .... ..... ..... .... ..... ..... 1
2 Getting Started .... ....... .. .. ... .. .. ... .. .. ....... ....... .. 2
3 Connecting the Camera ..... .. ....... ....... .. .. ... .. .. ... 4
3.1 Option 1: Connecting the Camera to an
NVR...... ....... .. .. ... .. .. ... .. .. ....... ....... .. . 4
3.2 Connecting Cameras to the Local Area
Network (LAN)...... .. .. ... .. .. ... .. .. ....... ...... 5
3.3 Adding the PTZ Camera to the LNR / NR
Series NVRs.... .. .. ....... .. .. ... .. .. ... .. .. ... .. . 9
3.4 Adding the PTZ camera to the LNK
Series NVRs.... .. .. ... .. .. ... .. .. ....... .. .. ... ..11
4 Installation ..... ....... .. .. ... .. .. ... .. .. ....... ....... .. .. .13
4.1 Installation Tips & Warnings ..... .. .. ... .. .. .....13
4.2 Installation (Indoor / Outdoor)... .. .. .. ... .. .. ... .14
5 Controlling the PTZ Camera with an NVR . .. .. ... .. .. ..18
6 Controlling the PTZ camera with LNR / NR
Series NVRs. .. ... .. .. .. ... .. .. ..... .. ..... .. .. .. ... .. .. ... .19
6.1 Controlling the PTZ Camera . .. .. ... .. .. ....... ..20
6.2 Advanced PTZ Controls. .. ... .. .. ....... ....... ..22
7 Controlling the PTZ camera with LNK Series
NVRs . .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. .28
7.1 Controlling the PTZ camera... .. .. ... .. .. ... .. .. .29
8 Technical Specifications ... ....... .. .. ... .. .. ... .. .. .....34
8.1 Dimensions . .. . .. .. .. . .. .. .. . .. .. .. .. . .. .. .. . .. .. .36
9 Troubleshooting . .. ....... ....... ... ... ... .. ... ... ... .. ....37
10 Inserting the microSD Card (Optional) and
Resetting the Camera....... .. .. ... .. .. ... .. .. ....... .....39
#; r. 4.0/47037/47040; en-US vii
1 Safety Instructions
• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use of the product and handle with
care.
• Use the camera within given temperature, humidity, and voltage
levels noted in the Technical Specifications.
• Camera is rated for outdoor use and is weatherproof when prop-
erly installed. Camera is not intended for submersion in water. In-
stallation under a sheltered environment is recommended.
• Do not disassemble the camera.
• Do not point the camera directly towards the sun or a source of in-
tense light.
• Use only the supplied regulated power supply. Use of a non-regu-
lated, non-conforming power supply can damage this product and
voids the warranty.
• Make sure to install the camera in a location that can support the
camera weight.
• Make sure there are no live electrical cables in the area where you
plan to mount the camera.
• Periodic cleaning may be required. Use a damp cloth only. Do not
use anything other than water to clean the dome cover, as chemi-
cals such as acetone can permanently damage the plastic.
#; r. 4.0/47037/47040; en-US 1
3 Connecting the Camera
NOTE
It is recommended to connect the camera to your NVR and test
the PTZ controls before permanent installation. For instructions on
how to set up PTZ controls, see 5 Controlling the PTZ Camera with
an NVR, page 18.
3.1 Option 1: Connecting the Camera to an NVR
1. Connect the PoE+ connector on the camera cable to the included
Ethernet extension cable.
2. Connect the Ethernet extension cable to one of the PoE+ ports
on the back panel of your NVR.
NOTE
• You can use up to a 300ft (91m) CAT5e Ethernet cable to con-
nect the camera to your NVR.
• The camera is Compatible with the LNR / NR / LNK Series
NVRs, excluding the LNR200 and LNR300 Series. For the
most up-to-date list of compatible recorders, please visit
lorextechnology.com/compatibility.
#; r. 4.0/47037/47040; en-US 4
3 Connecting the Camera
3.2 Connecting Cameras to the Local Area Network (LAN)
For flexibility, you may also connect the camera to the same Local
Area Network (LAN) as the NVR. This is accomplished by connecting
the camera to the same router as the NVR. For these installations, an
external PoE+ switch (sold separately) or power adapter (included)
must be used to provide power to the camera. You also must add the
camera on the NVR before it will show a picture on the monitor or be
recorded by the NVR.
#; r. 4.0/47037/47040; en-US 5
3 Connecting the Camera
What is PoE+?
PoE (Power over Ethernet) is a technology that allows Ethernet cables
to carry electrical power to connected devices. High-powered devices
such as PTZ cameras use PoE+ (also known as PoE class 4 or IEEE
802.3at), which provides more power to connected devices than
standard PoE. Compatible NVRs use integrated PoE+ ports to pro-
vide power and PTZ commands to the camera, as well as video con-
nection to the NVR. PoE+ ports will provide up to 30W to each
connected device, whereas standard PoE (class 3) ports only provide
up to 15W. In order to use this PoE+ rated camera without a power
adapter, you must connect it directly to a compatible NVR (Compati-
ble with the LNR / NR / LNK Series NVRs, excluding the LNR200 and
LNR300 Series) or a PoE+ switch on the same network as the NVR.
PoE+ switches are available for purchase on
lorextechnology.com (model #: ACCLPS241B (4–channel model)
or ACCLPS281B (8–channel model)).
Complete the following steps to connect the camera to the NVR over
the LAN.
#; r. 4.0/47037/47040; en-US 6
Tabla de contenidos
Idiomas:
Otros manuales de Cámara de seguridad de Lorex
Lorex
Lorex W462AQC Series Instrucciones de funcionamiento
Lorex
Lorex LZV1722 Manual de usuario
Lorex
Lorex LNW16XF Manual de usuario
Lorex
Lorex Vantage LZC7091 Manual de usuario
Lorex
Lorex SG600B Manual de usuario
Lorex
Lorex C861MB Series Manual de usuario
Lorex
Lorex CVC6945PK4 Manual de usuario
Lorex
Lorex LBV2521 Manual de usuario
Lorex
Lorex E892AB Series Manual de usuario
Lorex
Lorex SG7215P Manual de usuario
Lorex
Lorex LKE383A SERIES Manual de usuario
Lorex
Lorex SG6185W Manual de usuario
Lorex
Lorex LNE3142 SERIES Manual de usuario
Lorex
Lorex CVC7661 Series Manual de usuario
Lorex
Lorex VANTAGE CVC7660 Series Manual de usuario
Lorex
Lorex Aurora Series Manual de usuario
Lorex
Lorex LIVE SD+ LW2730 Series Manual de instrucciones
Lorex
Lorex LW4211 SERIES Manual de usuario
Lorex
Lorex LWB4901AC Manual de usuario
Lorex
Lorex Vantage SG640 Manual de usuario
