Lorex L20WD800 Series Manual de instrucciones

MODEL:

L20WD800

20’’ WIDE SCREEN LCD MONITOR

WITH BUILT-IN

DIGITAL VIDEO RECORDER

Frequently Asked Questions

www.lorexcctv.com

Version: 080718-01

What is included in the box?

Table of Contents

What are the features?..............................................................................Error! Bookmark not defined.

What is included in the box? ..................................................................................................................... 3

How do I Startup / Shutdown the system? ................................................................................................ 4

What do the buttons and connectors on the monitor mean? .................................................................... 5

How do I connect DIN cameras to the system? ........................................................................................ 6

How do you connect BNC cameras to the system?.................................................................................. 7

What is DVR Mode and how do I use is?.................................................................................................. 8

How do I use the Remote in DVR Mode? ................................................................................................. 9

How do I use the On-Screen Display Menu? .......................................................................................... 10

What do the icons on the System Display mean?...................................................................................11

What are the Display Modes, and how do I use them?........................................................................... 12

What is PIP and how do I use it? ............................................................................................................ 13

What is DVR Mode? ................................................................................................................................ 16

How do I access DVR Mode? ................................................................................................................. 16

What is VGA Mode? ................................................................................................................................ 17

How do I access and use VGA Mode?.................................................................................................... 18

What is Component Mode?..................................................................................................................... 19

How do I access and use Component Mode?.........................................................................................20

What is Picture Frame Mode?................................................................................................................. 21

How do I access and use Picture Frame Mode? .................................................................................... 22

What is Installation Guide Mode?............................................................................................................ 23

How do I access Installation Guide Mode? ............................................................................................. 23

What is included in the box?

The system comes with the following components:

*HARD DRIVE SIZE AND CAMERAS VARY BY SPECIFIC MODEL. PLEASE REFER

TO YOUR PACKAGE FOR CONTENT DETAILS.

CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE

COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE.

What is included in the box?

How do I Startup / Shutdown the system?

System Loading Sequence

• Press the POWER button located on the front panel

of the System to start the unit, or press the Power

Button on the Remote Control.

• The System will perform a Hard Drive check

The unit will initially load to a split screen view,

displaying all channels (if available). Empty channels

will be displayed in Blue.

NOTE: If a new HARD DRIVE is detected, the system will prompt you to FORMAT the drive. If

you do not choose to format the HARD DRIVE, the drive will not be detected by the system.

If you choose to FORMAT a drive in this way, the drive will no longer be readable by a regular

PC without using the HARD DRIVE VIEWER software included on the CD provided with this

unit. Please see the Appendices for details on Hard Drive format.

Monitor Display Shutoff

• Press the Power Button on the front panel or remote control for one second to turn off the

monitor only.

• The System will continue to record while the monitor is off.

• The LED indicators on the front of the System will remain ON.

• The monitor shutoff can be automatically set using the Screen Saver settings in the System

Menu.

System Shutdown

• Press and hold the Power Button on the front panel

or remote control for three seconds to turn off the

System, or select Shutdown from the Mouse Menu.

Enter the Admin Password (1234 by default).

• Only the ADMIN can turn the unit ON/OFF.

• The System will NOT continue to record while the

unit is off.

• The LED indicators on the front of the System will

be OFF.

System Shutdown Prompt

What is included in the box?

What do the buttons and connectors on the monitor mean?

How do I connect DIN cameras to the system?

1. Connect the female end of the supplied DIN extension cable to the camera.

NOTE: Confirm that the arrows on the DIN Camera

Cable and the DIN Extension cable are pointed together

when connecting the cable. If the pins in the DIN Cable

are bent, the Camera will NOT function.

2. Connect the male end of the supplied DIN extension cable to an open DIN camera input

on the back of the System. Continue connecting additional DIN cameras.

NOTE: The arrow on the DIN Camera

should be facing up when connecting the

DIN Extension Cable to the System. *

Camera Model may not be exactly as

shown.

* Camera Model may not be exactly as shown.

Benefits!

•Easy installation

oDIN cameras get their power source from the system, so there is

no need for a power adaptor.

How do I connect DIN cameras to the system?

How do you connect BNC cameras to the system?

1. Connect the Extension cable to the Camera

and System:

A. Connect the Barrel Power connector to

a power adaptor.

B. Connect the BNC connector to an

available BNC Port of the System.

C. Connect the Male Power connector to

the Camera.

D. Connect the BNC connector to the

Camera.

2. Connect the Power Adaptor to a wall outlet.

IMPORTANT NOTE: The ends of the extension cable are NOT the same - one end has a

Male power port, and the other has a Female power port. Before permanently running the

Camera Extension Cable, make sure that the cable has been oriented between the Camera

and the unit correctly.

Camera Connection Diagram

Male Power Port - The male

power port end of the

Extension cable connects to

the Camera.

Female Power Port - The

female power port end of the

Extension cable connects to

the Power Adaptor.

How do I connect DIN cameras to the system?

What is DVR Mode and how do I use is?

DVR Mode is the primary mode for the System, and is displayed when the system is

powered on. In DVR Mode, the system performs the following functions:

•View and Record live video channels in Single, Quad, Multi-Display or Sequence

Mode.

•Customize the recording on up to 8 camera channels in continuous, motion or alarm

recording modes.

•Archive data to USB Thumbstick, USB Hard Drive, CDRW/DVD-RW or Network

Storage through FTP.

•Search through Previously Recorded Events

•Customize the Display, Cameras and System to best suit your security needs

through the user friendly System Menu GUI (Graphical User Interface).

NOTE: The DVR will continue to record independently of the current Monitor Mode.

To return to DVR Mode (from any other Mode):

Front Panel:

1. Press the Multi-Function Mode Button on the Front Panel.

2. Use the Up and Down arrows on the Navigation Control to select DVR.

3. Press the Enter button on the Navigation Control to switch to DVR Mode.

Remote:

1. Press the DVR Button on the Remote Control -or-

2. Press the Mode button on the Remote Control. Use the arrows to select DVR, and press

the Enter button.

How do I connect DIN cameras to the system?

How do I use the Remote in DVR Mode?

1. MODE: Press the Mode Button to display the

Multi-Function Mode Menu.

2. POWER: Press the Power Button to turn off the

Monitor Display. Press and hold the button for

3 seconds to shut down the entire system.

3. DVR: Change to DVR Mode.

4. VGA: Change to VGA Mode.

5. RETURN: Exits from a System Menu.

6. NAVIGATION/PLAYBACK: Press the

Navigation Controls to move Up, Down, Left or

Right in System and Mode menus. Use the

Playback controls to Pause, Play, Reverse or

Fast-forward the Playback in DVR Mode.

7. INFO: Displays the System Information in DVR

Mode.

8. SEARCH BUTTON: Displays the Video

Playback Search menu.

9. NUMBER KEYPAD: Use to switch between

Cameras in live view mode.

10. VOL +/-: Increase or Decrease the volume of

the camera currently broadcasting live audio.

11. DVR SETUP: Displays the DVR Setup Menu.

12. REMOTE ID: Changes the ID for the remote

control to match the System ID (if changed).

Use the Remote ID when using one remote to

control multiple systems). To set the Remote to

default, press and hold the Remote ID button

for 5 seconds, then select number 1. Press the

Enter and Return buttons.

13. PICTURE FRAME: Change to Picture Frame

Mode.

14. COMPONENT: Change to Component Mode.

15. ENTER BUTTON: Press the Enter Button to

select an option in the System Menu or Multi-

Function Menu. Also displays PIP when in

camera viewing mode.

16. DISPLAY: Switches the display to single, quad

and multi-display views.

17. PTZ: Switches to PTZ Mode.

18. KEYLOCK: Locks all keys (except the Mode

button).

19. SEQUENCE: Changes the Monitor Display to

Sequence through channels (based on menu

settings).

20. PIP: Displays the Component Input in the PIP

Screen in the lower right corner.

21. ZOOM: Displays one channel with Digital

Zoom.

22. ARCHIVE: Displays the Archive menu.

23. AUDIO CHANNEL SELECT: Switches

between live audio channels (CH1~4 only).

Press Audio and select Channel 1~4.

How do I connect DIN cameras to the system?

How do I use the On-Screen Display Menu?

The On-Screen Display Menu is accessed by either:

•Pressing the Up or Down Arrows on the Front Panel <OR>

•Right Clicking the Mouse

The Menu options include:

1. CHANNELS: Select a Channel Number (1~8)

to display a camera in Full Screen Mode.

2. SETUP: Displays the System Setup Menu.

Please refer to the System Setup section for

detailed configuration.

3. SEARCH: Allows you to locate previously

recorded video by Date and Time, or by Event

Type.

4. PTZ: Displays the PTZ Control Screen. The

PTZ / Focus Menus will only work with PTZ

type cameras (not included)

5. DISPLAY: Changes the current display mode

to Single, Quad, 6-Channel Split, 8-Channel

Split or 9-Channel Split screen views.

6. ARCHIVE: The Archive feature copies data

from the Hard Drive to a USB backup media

such as a Memory Stick or USB Hard Drive.

See the Archive Menu Section for details.

7. SEQUENCE: Selecting the Sequence option

switches the live camera view to the Sequence

set in the System Menu.

8. ZOOM: Displays one channel with Digital

Zoom.

9. KEY LOCK: Locks all Front Panel and

Remote Control buttons (except the Mode

change buttons). The password is required to

unlock the keys. The System can still enter

any other mode while the keys are locked

(VGA, Component, Picture Frame or

Installation Video modes).

10. VOLUME: Adjusts the volume of the System.

11. PIP: Select the PIP Button to display the VGA

or Component mode in a PIP window. This

function could be used to watch a Movie while

still monitoring the Live Video display.

12. SHUTDOWN: Select the Shutdown option to

turn off the System. • Pressing the Up or Down

Arrows on the Front Panel • Right Clicking the

Mouse

Otros manuales para L20WD800 Series

Tabla de contenidos

Otros manuales de DVR de Lorex

Lorex

Lorex LH314 Manual de instrucciones

Lorex

Lorex LH400 LINK SERIES Manual de usuario

Lorex

Lorex LHWF1006 Series Manual de usuario

Lorex

Lorex DV700 Series Manual de usuario

Lorex

Lorex TR 1285 Manual de usuario

Lorex

Lorex LHA4000LC Series Manual de instrucciones

Lorex

Lorex DV900 Series Manual de usuario

Lorex

Lorex LNR400 SERIES Manual de usuario

Lorex

Lorex ELESS SECURITY CAMERA SYSTEM Manual de usuario

Lorex

Lorex SG19 Series Instrucciones de funcionamiento

Lorex

Lorex LH600 SERIES Manual de usuario

Lorex

Lorex LH060 Series Manual de usuario

Lorex

Lorex LHV5100W Series Manual de usuario

Lorex

Lorex LHA2000M Series Manual de usuario

Lorex

Lorex N910 Series Manual de usuario

Lorex

Lorex LH050 ECO SERIES Manual de usuario

Lorex

Lorex Vantage LH340 EDGE3 SERIES Manual de usuario

Lorex

Lorex VANTAGE LH110 ECO SERIES Guía de instalación

Lorex

Lorex Road Warrior RW2S Manual de instalación y operación

Lorex

Lorex L224 Series Manual de usuario

Lorex

Lorex N881 Series Manual de usuario

Lorex

Lorex ECO LH100 SERIES Manual de usuario

Lorex

Lorex L154-81 Manual de usuario

Lorex

Lorex DGN209 Manual de usuario

Manuales populares de DVR de otras marcas

FLIR

FLIR M3100E Series Manual de usuario

VTRACKPRO

VTRACKPRO FPRO300 Manual de usuario

Swann

Swann NVR-7085 models Manual de usuario

XtendLan

XtendLan DVR-1670C Manual de usuario

urmet domus

urmet domus 1093/004AHD Manual de usuario

Holux

Holux M1 Manual de usuario

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manual de usuario

Whistler

Whistler D16VRS Manual de usuario

Defender Security

Defender Security 82-20235 Manual de usuario

MISUMI

MISUMI MP-WF100M Manual de usuario

Speco

Speco D8HU Manual de usuario

UST

UST DDR-E04AA Instrucciones de uso

Consolidated

Consolidated Digital Video Recorder Manual de usuario

Mace

Mace DVR0404RW Guía de inicio rápido

RCA

RCA RTD315W Manual de usuario

FSM

FSM Colibri Grande PRO Manual de usuario

Hauppauge

Hauppauge HD PVR 2 Manual de usuario

Identivision

Identivision ICR-PH161i PIONEER Manual de usuario