USER GUIDE
658693
6+
Illustrations are for reference only.
Styles may vary from actual contents.
GAMES MENU
Match Match:
• Match the images before the time runs
out.
• Use the Directional buttons to scroll
through the cards.
• Flip the card over by pressing the Enter
button.
• If they match, you will earn a point.
• If they don’t match, they will flip back
over and you will have to try again.
5200
Photo Puzzle:
The device will choose one of three
Tobi™ scenes.
• Press the Directional buttons to scroll
through the tiles.
• To move a tile, press the Enter button.
The tile can only move into the empty
square.
• Continue to move the tiles until the
picture is complete. The empty square
should be on the lower right corner if
all the pieces are in order.
• To win, make sure the photo is
complete before the time runs out.
• There are three levels. After completing
3 rounds, the game will move to the
next level. Each level will have shorter
time.
17
16
COMICS MENU
Create Comic Books
• To access the comic book layouts, scroll through
the Menu with the directional buttons and
press the Enter button to select the comics icon.
• Scroll and choose from the layout options.
• After choosing the layout, choose a panel and
then choose a picture to place in that panel.
• Add speech bubbles and graphics to the images.
• Choose the save icon to save the comic book.
ADD SPEECH BUBBLES:
• Use the directional buttons to choose a speech bubble.
• Press the Enter button to select the speech bubble.
• The speech bubble will appear in the photo panel.
• Move the speech bubble to the desired location with the
directional buttons. Then, press the check mark to place.
ADD GRAPHICS
• Use the directional buttons to choose a graphic.
• Press the Enter button to select the graphic.
• The graphic will appear in the photo panel.
• Move the graphic to the desired location with the directional
buttons. Then, press the check mark to place.
MASK MODE MENU
GALLERY MENU
SETTINGS MENU
Please keep this manual as it contains important information.
www.littletikes.com
www.littletikes.co.uk
www.littletikes.com.au
Little Tikes Consumer Service
2180 Barlow Road Hudson,
Ohio 44236 U.S.A.
1-800-321-0183
MGA Entertainment, Inc.
9220 Winnetka Ave, Chatsworth, CA
91311
U.S.A. 800-222-4685
MGA Entertainment UK
Ltd.
50 PresleyWay, Crownhill,
Milton Keynes,
MK8 0ES, Bucks, UK
0800 521 558
Imported by MGA Entertainment
Australia Pty Ltd
Suite 2.02, 32 Delhi Road
Macquarie Park NSW 2113
1300 059 676
MGA Entertainment (Netherlands) B.V.
Baronie 68-70, 2404XG
Alphen a/d Rijn, The Netherlands
Tel: +31 (0) 172 758038
For more information including the latest instructions, visit:
WWW.LITTLETIKES.COM/TOBI2-CAMERA
Microsoft® and Windows logos are trademarks of
Microsoft Corporation in the United States and other
countries.
Macintosh and Mac logos are trademarks of Apple Inc. in
the United States and other countries. All other
trademarks are the property of their respective owners.
PRINTED IN CHINA
0521-0-E/INT
© 2021 MGA Entertainment, Inc.
TOBI™ is a trademark of MGA in the U.S. and other
countries. All logos, names, characters, likenesses,
images, slogans, and packaging appearance are the
property of MGA.
TROUBLESHOOTING
CARE AND MAINTENANCE
WARNING
SPLASHPROOF
While your device can withstand splashes from washing your hands or dancing in
the rain, it is not recommended to submerge the device in water.
To prevent water damage:
1. Always ensure the cover over the Micro-USB port is completely closed to
prevent water from getting inside the camera.
2. Do not place the device under running water.
3. Do not submerge in water or use while swimming.
RESTARTING CAMERA
To restart the camera, move the switch under the device to the OFF
position and then back to the ON position.
This toy produces ashes that may trigger epilepsy in sensitized individuals.
A very small percentage of people, due to an existing condition, may experience
epileptic seizures or momentary loss of consciousness when viewing certain light
patterns or ashing lights. While this product does not contribute any additional risks,
it is recommended that parental supervision is enforced during play. If you experience
any dizziness or altered vision, disorientation or convulsions, IMMEDIATELY
discontinue use and consult a physician. Focus on screens in close proximity for an
extended amount of time may cause fatigue or discomfort. For every one hour of
play, take a 15 minute break, or take breaks more frequently as needed.
• Always keep the port cover closed during use to prevent water or debris from
entering the device. Only open the port cover to connect the device to your
computer.
• Keep the device clean by wiping it o with a slightly damp cloth and drying it
thoroughly. Do not place the device under running water or use harsh chemicals or
abrasive materials to clean.
• Wipe the accessories with a damp cloth regularly to keep them clean. Always air dry;
do not subject to heat.
• Keep the device and accessories out of direct sunlight for long periods of time. Do not
expose the device or accessories to direct heat sources.
• Do not drop the device on a hard surface to prevent damage.
• Keep the camera lens clean. If pictures are blurry, it could be because dust or dirt is
covering the camera lens. Wipe clean with a dry, soft cloth and/or blow gently on the
lens to remove any debris.
• If you do not plan to use the device for an extended period, it is recommended that
you turn the device off. Regularly charge the battery when not in use to ensure the
battery accepts a charge. See BATTERY LIFE AND MAINTENANCE on page 23.
The camera has
stopped working.
1. Turn the power OFF by pressing and holding the
home button until the device turns o.
2. Turn the device back ON by pressing and holding
the home button until the device turns on.
NOTE: if the device still does not work, charge the
battery (see page 4) and follow the steps above.
1. Ensure the lighting in the area you are shooting is
sucient.
2. Check that the camera lens is clean. If dirty, wipe
with a dry, soft cloth and blow on it to remove
debris. See CARE AND MAINTENANCE on page 23.
1. Ensure there is a good connection between the
device and the computer via the Micro-USB Cable.
See MICRO-USB PORT on page 4 and other
supporting sections for more information.
2. If the cable is damaged, contact consumer service.
Do not attempt to use the cable if it is damaged.
1. Stay within close proximity (about 50 ft./15m with
nothing in the way) of a Tobi™2 Robot Smartwatch
if connecting a smartwatch.
2. The device must have a sucient amount of
battery power to connect wirelessly. Recharge the
device using the included Micro-USB cable.
1. Only use the included Micro-USB cable to charge
the device.
2. It is recommended you only charge the device
using a USB port on your computer.
3. Make sure to charge the device regularly, even if it
is not in use. A battery that has not been charged
in a long time may no longer accept a charge.
The image or
video taken is not
clear.
Cannot connect
the device to a
computer.
Wireless
connectivity is
not working
properly.
The device is not
charging.
Camera not
turning on.
1. Press and hold the home button for three seconds.
2. Move the switch under the device to the OFF
position and then back to the ON position.
3. Make sure it is fully charged.
Camera is frozen. Move the switch under the device to the OFF
position and then back to the ON position.
LIMITED WARRANTY
FCC COMPLIANCE
LiPo BATTERY SAFE USAGE
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Caution: Modications not authorized by the manufacturer may
void users authority to operate this device.
This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions: 1. This device may not cause interference.
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
CAN ICES-3 (B)/NMB-3(B).
This device is equipped with a Lithium Polymer (LiPo) rechargeable battery.
Please pay attention to the following cautions for safety use:
•
Before recharging, allow the battery to cool for at least 10 minutes after use.
•
Do not dispose of the battery in re or extreme heat.
•
Do not use or leave the battery near a heat source such as a re or a heater.
•
Do not strike or throw the battery against hard surfaces.
•
Do not immerse the battery in water.
•
Keep the battery in a cool, dry place.
•
When recharging, only use the Micro-USB Cable specically included for that
purpose.
•
Do not over-charge the battery.
•
Do not directly solder the battery and pierce the battery with a nail or other
sharp object.
•
Do not disassemble or alter the battery.
•
Charge the battery as necessary. Failure to charge the battery frequently may
result in a battery that will no longer accept a charge.
•
Do not transport or store the battery with metal objects such as necklaces,
hairpins, etc.
•
Please recycle a used battery after covering the battery wires/terminals with
electrical tape or by inserting it into an individual poly bag. Check local laws
and regulations for recycling and/or disposal information.
•
Under the environment with electrostatic discharge, the product may
malfunction and require the user to reset the product by turning it o and
back on again.
•
Rechargeable batteries are only to be charged by an adult.
BATTERY LIFE AND MAINTENANCE
Check the battery charge level on the quick menu view. If the battery is yellow, it’s
time to charge soon. If the battery is red, charge the battery as soon as possible.
Charge the battery regularly to maintain optimum performance, even when the
device isn’t regularly in use. For example, charge the device at least once every six
months. Turn the device OFF before charging the battery. Keep the device OFF
when the device will not be in use for an extended period.
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed
of with other household waste. Please use designated collection points or
recycling facilities when disposing of the item. Do not treat old batteries
as household waste. Take them to a designated recycling facility.
BATTERY DISPOSAL
CAUTION:
An ADULT must remove the battery for proper disposal. Always wear protective safety
goggles in case of battery leakage.
BATTERY REMOVAL INSTRUCTIONS
This camera contains a battery that is non-replaceable. Do not attempt to open the device
unless you are permanently disposing the device. Opening the device for any other reason
could void the warranty. Battery removal is permanent, and the device will no longer work
after removing the battery.
Remove the bottom case. Remove the screws’plugs.
1 2
DATED SALES RECEIPT REQUIRED FOR PROOF OF PURCHASE
EN
Masks Eect
• To access the Mask Mode menu, scroll
through the menu with the
directional buttons and then press
Enter button to select the mask mode icon.
• Before you take a picture, press the
left or right directional buttons to scroll
through all the dierent options.
• Press the Shutter button to take the picture.
• To zoom in or out, press the up or down buttons.
• To activate the timer, press the Option button.
Use the left or right buttons to select timer time.
19
18
All videos, pictures, recorded audio and stickers created with the camera will be
saved to the gallery. To access the Gallery Menu, scroll through the menu with
the directional buttons and then press the Enter button to select the gallery icon.
• While in the video gallery, use the directional button and Enter button to select
and view the videos.
• Use the home button to return to the gallery’s main page and scroll left or right
to view the saved items in the camera, recorded audio and sticker galleries.
• To erase anything in the gallery, press the Delete button and then the check
mark to confirm the action.
GALLERIES
Videos Pictures Audio Stickers
To cycle through each setting, use the directional buttons to scroll and the Enter
button to select it. Make the appropriate changes and press the Home button to
return to the Settings Menu.
Brightness, Volume, Date, Time
Brightness Setting
Use the up and down buttons to change
the brightness of the screen.
Use the right button to move to the
volume.
Volume Setting
Use the up and down buttons to change
the device’s volume level.
Use the left button to move to the
brightness.
Date Selection/Date Format:
• To change the date, use the left or right
buttons cycle through the month, day,
year. There will be arrows above and
below the selected sections.
• Use the up or down button to change
the numbers.
• To change the date format, use the left
button until the arrows are over the
date format section.
• Use the up or down button to change
the date format.
• Press the Home button to set it. After
pressing the Home button, it will
return to the Settings Menu.
Time Selection:
• Use the left or right buttons to cycle
through the hour, minutes and
AM/PM. Arrows above and below will
appear in the selected sections.
• Use the up or down button to set the
time.
• Use the left or right buttons to select
the time display. Then use the up and
down to choose between 12 or 24
hour cycle.
• Press the Enter button to set it. After
pressing the Enter button, it will return
to the Settings Menu.
NOTE: Tobi™2 Director’s Camera will not
automatically change for Daylight Savings Time.
SETTINGS MENU CONTINUED
Resolution, Remote Control, Memory, Firmware Version, Language
21
20
Camera Setting
Use the up and down buttons to change
the resolution of the camera
Use the right button to move to the
video’s setting.
Video Setting
Use the up and down buttons to change
the resolution of the video.
Use the left button to move to the
camera’s setting.
FW:V2.0.1
https://www.littletikes.com/tobi
STORAGE & UPDATES: To cycle through each setting, use the directional
buttons to scroll and the Enter button to select it. Make the appropriate
changes and press the Home button to return to the sub-menu.
Tobi™2 Robot Smartwatch
Control the camera using a Tobi™2
Robot Smartwatch (sold separately).
• When prompted on the smartwatch,
connect it to the camera.
• Use the smartwatch as remote
control to control the camera.
• Camera will only work with Tobi™2
Robot Smartwatch.
67MB 67MB
Memory/Factory Reset
• The top bar will show the device’s
memory space.
• To reset the device to the factory
settings, press the down button and
then the Enter button. Press the X or
check mark to confirm the action.
NOTE: Resetting will delete
anything saved on the device.
Firmware Version:
• Check that Tobi™2 Director’s
Camera is up-to-date with the latest
available firmware.
• The screen will show you which
version you have.
• See page 6 for more information on
Firmware updates.
NOTE: You will also see this screen on your
rst start up after updating the rmware.
Language Selection:
• Use the up and down buttons to
change the language.
• English • Spanish • French
• Dutch • German • Italian • Polish
REMEMBER: Tobi™2 Director’s Camera does not
speak any language.
12:45
English
23
22
25
24
27
26
This warranty is applicable only to the original purchaser, is non-transferabe and
applies only to The Little Tikes Company products or parts. This product is covered
by a 6-month warranty from the original purchase date, under normal use and
service, against defective workmanship and materials. This warranty does not
apply to:
• Consumable parts, such as batteries
• Cosmetic damage, including but not limited to scratches and dents
• Damage caused by use with non-Little Tikes® products
• Damage caused by accident, misuse, unreasonable use, immersion in water,
neglect, abuse, battery leakage, or improper installation, improper service, or
other external causes
• Damage caused by operating this product outside the permitted or intended
uses described by The Little Tikes Company in this manual
• A product or part that has been modied
• Defects caused by normal wear and tear or otherwise due to the normal aging of
the product
• If any Little Tikes® serial number has been removed or defaced
For assistance, please contact consumer service:
U.S.A and Canada: For warranty service or replacement part information, please visit our
website at www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service, The Little
Tikes Company, 2180 Barlow Road, Hudson OH 44236, U.S.A. Some replacement parts may
be available for purchase after warranty expires—contact us for details.
United Kingdom: For warranty service or replacement part information, please visit our
website at: littletikes.co.uk, and/or call +0800 521 558 or write to 50 Presley Way, Crownhill,
Milton Keynes MK8 OES, Bucks UK. Some replacement parts may be available for purchase
after the warranty expires – contact us for details.
Australia: For warranty service or replacement part information, please visit our website at:
littletikes.com.au, and/or call 1300 059 676 or write to Suite 2.02, 32 Delhi Road, Macquarie
Park NSW 2113. Some replacement parts may be available for purchase after the warranty
expires – contact us for details.
Benelux Region: For warranty service or replacement part information, please visit our
website at: littletikes.nl, and/or call +31(0) 172 758038 or write to
klantenservice@mgae.com. Some replacement parts may be available for purchase after
the warranty expires – contact us for details.
Outside of these countries: Contact place of purchase for warranty service. This warranty
gives you specic legal rights, and you may also have other rights, which vary from
country/state to country/state. Some countries/states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion may
not apply to you.
If the service representative is unable to resolve the issue, you will be provided
instructions on how to return the product and have it replaced under warranty.
Return of the product under warranty must adhere to the following rules:
If The Little Tikes Company believes that there may a defect in the materials or
workmanship of the product and can conrm the purchase date and location of
the product, we will at our discretion replace the product with a new unit or
product of comparable value. A replacement product or parts assumes the
remaining warranty of the original product or 30 days from the date of
replacement, whichever provides longer coverage.
THIS WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN
LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL,
WRITTEN, STATUTORY, EXPRESS OR IMPLIED. IF THE LITTLE TIKES COMPANY
CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES THEN TO THE
EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED TO THE
DURATION OF THE EXPRESS WARRANTY AND TO THE REPLACEMENT SERVICE AS
DETERMINED BY THE LITTLE TIKES COMPANY IN ITS SOLE DISCRETION. ANY
DISPUTES RESULTING FROM THIS WARRANTY SHALL BE SUBJECT TO THE FINAL
AND CONCLUSIVE DETERMINATION OF THE LITTLE TIKES COMPANY.
To the extent permitted by law, The Little Tikes Company will not be responsible
for direct, special, incidental or consequential damages resulting from any breach
of warranty.
LIMITED WARRANTY CONTINUED
All games have three level options, where 1 is the easiest and 3 is the hardest level.
LAYOUT OPTIONS:
12 3 4
Use a small Phillip’s screwdriver (not included) to
remove the four screws on the front of the camera.
3 4
Use scissors to carefully cut the black and red wires
ONE AT A TIME. Cover the wires/terminals with
electrical tape and properly dispose of the battery.
The masks will track the person’s face on the screen and move with the person.
Depending on the mask, it will appear on a certain part of your face. For example, if
you choose a hat mask, it will appear on the head of the person. If you choose
glasses, it will appear on the eyes of the person.
12:45
12:45
mm/dd/yy
1 1/02/2020
12:45
1 1:30 am
12
IMPORTANT NOTES:
• Face recognition will vary depending on the environment. Make sure to stand
3’4” in. (1m) in front of the camera and the camera can clearly see the face.
• Make sure the face is always in a front face position.
• The camera will only be able to detect 3 faces.
