Linn INDEX Manual de usuario
LINN INDEX
OWNERS MANUAL
2
NTRODUCTION Thank you for choosing our Linn INDEX LS120 Loudspeakers, the result of
extensive design and development work. The INDEX set new standards of performance in
loudspeakers of this type.
Remember, no loudspeaker is capable of improving the quality of the input signal, so the INDEX should
be used with good quality ancillary equipment.
INSTALLATION When removing the loudspeakers from their boxes, lift the cabinets out by their sides.
This will avoid possible damage to the grilles and their drive units.
Please retain all packing for possible future transportation.
I
3
All loudspeakers perform best when rigidly mounted. To achieve this, Linn have designed a stand for the
INDEX, which includes stabilising floor spikes. These stands give optimum sound quality and ensure that
the drive units are correctly positioned for the listener.
Connection of the loudspeakers to the amplifier should be made with a good quality cable. Linn K20
loudspeaker cable is ideal. The leads should be terminated with the connectors supplied to ensure
optimum performance. The use of other connectors will degrade the sound quality of your system.
The cable is marked with the Linn symbol to indicate directionality. The bare wires shown should he
connected to the amplifier and the end marked with the circular logo should be connected to the
loudspeakers.
< LOUDSPEAKERS AMPLIFIER >
Take care to ensure that the wiring is correct. The red socket is positive and the black is negative. The
positive wire (red connector) is identified by a rib along the side of the cable.
INDEX speakers are designed to perform best when placed close to a wall. Ideally the rear of the
loudspeaker should be between 4" and 17" (10 and 30cm) from the wall and at least 18" (45cm) from any
corner.
INDEX can also benefit from being angled inward slightly by 5 to 10 degrees.
STANDS
CONNECTIONS
POSITIONING
4
These are general guidelines and a little experimentation with positioning will optimise results for a
particular room. Your dealer will be pleased to do this when he installs your equipment.
The INDEX grille is special because it mounts directly onto the front facia of the speaker. This avoids the
problems of diffraction produced by conventional grille frames.
Bi-wiring improves the performance of a loudspeaker. By using a separate cable for the bass and treble
section, some interaction between the bass and treble section is removed. The extra cost of an
additional pair of loudspeaker cables is more than justified by the improvement in sound quality gained.
Because most amplifiers have only one speaker output you will have to double up the connection to the
speaker plug – your dealer will be pleased to supply the necessary leads for you, and to set up your
loudspeakers.
To convert the INDEX to single wired mode, use the key provided to unscrew the negative (black)
socket caps and fit the link provided. Replace and tighten the caps and then repeat for the positive (red)
sockets, and firmly re-tighten.
GRILLE
BI-WIRING
5
Linn loudspeakers require no internal maintenance and on no account should you try to remove any of
the drive units which are carefully tightened and sealed at the factory.
For servicing, always return the speakers as a pair to your supplier, using the original packing in order to
reduce she risk of damage in transit. If you have lost the packaging, your supplier can provide a
replacement set.
Ensure your equipment is insured by you during transit, repair and return shipping.
These units are guaranteed under the conditions that apply in the country of purchase. To help us,
please return your guarantee card.
In addition to any statutory rights you have as a customer, we undertake to replace any parts that have
failed due to faulty manufacture if you register your purchase with us.
Please keep a copy of your sales receipt as this will establish the purchase date of the loudspeakers
and refer all enquiries through authorised dealers only.
LINN PRODUCTS LIMITED, FLOORS ROAD, WATERFOOT, EAGLESHAM,
GLASGOW G76 OEP, SCOTLAND, TELEPHONE: ++44 (0)141 307 7777
FACSIMILE: ++44 (0)141 644 4262.
MAINTENANCE/SERVICE
GUARANTEE
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Oradores de Linn
Linn
Linn KABER LS500 Manual de usuario
Linn
Linn Majik 109 Manual de usuario
Linn
Linn MAJIK 112 Manual de usuario
Linn
Linn Sizmik 10.25 Manual de usuario
Linn
Linn CLASSIK AFEKT Manual de usuario
Linn
Linn MAJIK 126 Manual de usuario
Linn
Linn Majik 140 Manual de usuario
Linn
Linn KOMPONENT 110 Manual del propietario
Linn
Linn NEXUS Manual de usuario
Linn
Linn NINKA Manual de usuario
Linn
Linn TRIKAN Manual de usuario
Linn
Linn 5 Series Manual de usuario
Linn
Linn EKWAL Manual de usuario
Linn
Linn KAN II Manual de usuario
Linn
Linn TRIKAN Manual de usuario
Linn
Linn ESPEK Manual de usuario
Linn
Linn KEOSA Manual de usuario
Linn
Linn Komri Manual de usuario
Linn
Linn CUSTOM 2K 104C-S Manual de usuario
Linn
Linn Komri Manual de usuario
