Linksys PSUS4 - PrintServer For USB Instrucciones de funcionamiento originales

Model No.

Quick Installation

A Division of Cisco Systems, Inc.

Model No.

WIRED

PSUS4

with 4-Port Switch

PrintServer for USB

Package Contents

• One PrintServer for USB with 4-Port Switch

• One Power Supply

• One Setup CD with User Guide

• One Ethernet Network Cable

• One USB cable

• One Quick Installation

• One Registration Card

Before starting the physical installa-

tion, note the PrintServer’s Default

Name on the bottom of the Print-

Server for future use.

APlug one end of the Ethernet

network cable into one of the

PrintServer’s LAN Ports (1-4).

(See Figure A.)

BConnect the other end of the

cable into your networked hub,

switch, or router. The distance

between the PrintServer and

the other device should not

exceed 328 feet (100 meters).

CUse the USB cable to connect

your printer to the PrintServer’s

USB port. Plug the Type A con-

nector end into the PrintServer

(Figure D) and the Type B con-

nector end into the printer.

DPower on your printer.

EPlug the power adapter cord

into the PrintServer’s Power port,

which is located on the right

side of the PrintServer. (See Fig-

ure F.)

FPlug the power adapter into

an electrical outlet.

The PrintServer connection is com-

plete. Go to Step 2.

Connecting the PrintServer

FThe Basic Settings screen,

shown in Figure F, will appear. If

you want to change the

Device Name or Domain

Name, enter the Device Name

and Domain Name in the

respective fields. Click Next.

GThe IP Settings screen, Figure

G, appears next. If your network

uses a router with a DHCP Inter-

net Protocol setting that auto-

matically assigns an IP

address, select Automatically

obtain an IP address (DHCP). If

your network uses a static IP

address, select Set IP configu-

ration manually, and enter the

IP Address, Subnet Mask, and

Gateway in the fields provided.

Click Next.

HThe next screen that appears is

the Set PrintServer’s Password

screen, shown in Figure H. If

you want to change your pass-

word, enter your current pass-

word in the Current Password

screen. Enter the new pass-

word in the New Password field,

then enter it again in the Verify

Password field. Click Next.

Configuring the PrintServer

AInsert the Setup CD-ROM into

the computer’s CD-ROM drive.

The Setup CD-ROM should run

automatically. If it does not,

click the Start button and

choose Run. In the box that

appears, enter D:\setupWiz-

ard.exe (if “D” is the letter of

your CD-ROM drive).

BWhen you see the Welcome

screen, Figure B, click Setup

Wizard to continue.

CThe screen in Figure C will

appear while the Setup Wizard

is searching for the USB Print-

Server.

DAfter the Setup Wizard has

found the USB PrintServer, the

screen in Figure D will appear.

If this is the first time you have

run the Setup Wizard, make

sure that List only new (uncon-

figured) Print Servers is selected

and your Print Server is listed by

its default server name. If you

have previously configured the

Print Server, select List all com-

patible Print Servers. Click Next

to continue.

EThe Password screen, Figure E,

will appear next. Enter the

default password admin in the

field. Click Enter.

IMPORTANT: Make sure to use

the power adapter that is sup-

plied with the PrintServer. Use of

a different power adapter could

damage the PrintServer.

Linksys recommends that you set up

your printer and install your printer’s

driver before you install the Print-

Server’s driver.

AIf you haven’t already done so,

insert the Setup CD-ROM into

the computer’s CD-ROM drive.

When the Setup Wlizard’s Wel-

come screen appears, click

User Install to continue.

BWhen the Print Server Driver

Welcome screen appears,

click Next. See Figure B.

CWhen the next screen

appears, Figure C, choose the

location of where the driver’s

folder will be installed. If you

want the folder to be installed

in a different location, click the

Browse button and select the

location. To install the driver in

the default location, click Next

to continue.

DThe next screen to appear is

Select Program Folder, shown

in Figure D. An icon will be

added to the program folder

listed. You may change the

name for the program folder.

Click Next.

EThe next screen that may

appear while the driver is being

installed, is shown in Figure E.

IThe Confirmation screen

appears next. See Figure I. Your

old and new settings will be dis-

played. If you want to make a

change, click No. If the settings

are correct and you want to

save the changes, click Yes.

JThe Congratulations screen,

shown in Figure J, will appear

when the setup is complete.

KClick User Install at the bottom

of the screen, and go to Step

3.B.

Configuration of your PrintServer

is complete.

JThe Configure Printer Port

screen will appear, as shown in

Figure J. Your installed printer

will appear in the field. Click

the Connect button to con-

nect the printer for configura-

tion. To add another printer,

click the Add New Printer but-

ton.

The driver installation is complete.

Congratulations!

The PrintServer installation

is complete.

FWhen the driver is installed, the

Setup Complete screen, Figure

F, will appear. The Print Driver

must still be configured, so

make sure that Configure Print

Driver now is selected. Click

Finish to continue.

GThe Information screen

appears next. See Figure G.

Read the information, then

click OK.

HThe Printer Port Setup screen will

appear, as shown in Figure H,

and list the PrintServer and the

connected printers. Select a

printer, then click Next.

If the PrintServer or printer isn’t

listed, make sure that the

cable connections are good

and that the PrintServer and

printer are on.

IYou will be informed that the

PrintServer Port has been

added successfully. (Figure I.)

Click OK.

PSUS4-QI-30813NC-BW

JFor additional information or troubleshooting

help, refer to the User Guide on the Setup CD-

ROM. You can also call or email for further

support.

24-hour Technical Support

800-326-7114

(toll-free from US or Canada)

E-mail Support

[email protected]m

Website

http://www.linksys.com or

http://support.linksys.com

RMA (Return Merchandise Authorization)

http://www.linksys.com/support

FTP Site

ftp://ftp.linksys.com

Sales Information

800-546-5797 (800-LINKSYS)

Linksys is a registered trademark or trademark of

Cisco Systems, Inc. and/or its affiliates in the U.S.

Model No.

Windows Driver Installation 2

Otros manuales para PSUS4 - PrintServer For USB

Otros manuales de Servidor de impresión de Linksys

Linksys

Linksys WPSM54G V1.1 Manual de usuario

Linksys

Linksys Instant EtherFast EPSX3 Manual de usuario

Linksys

Linksys EFSP42 ver. 2 Instrucciones de funcionamiento originales

Linksys

Linksys WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print... Manual de usuario

Linksys

Linksys PPS1UW - EtherFast Wireless-Ready USB PrintServer Print... Manual de usuario

Linksys

Linksys WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print... Manual de usuario

Linksys

Linksys WPS54GU2 - Wireless-G PrintServer For USB 2.0 Print... Manual de usuario

Linksys

Linksys WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print... Manual de usuario

Linksys

Linksys PPS1UW - EtherFast Wireless-Ready USB PrintServer Print... Instrucciones de funcionamiento originales

Linksys

Linksys PSUS4 - PrintServer For USB Manual de usuario

Linksys

Linksys WPS54GU2 - Wireless-G PrintServer For USB 2.0 Print... Manual de operación

Linksys

Linksys WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print... Manual de usuario

Linksys

Linksys Instant EtherFast EPSX3 Manual de usuario

Linksys

Linksys WPS54GU2 - Wireless-G PrintServer For USB 2.0 Print... Instrucciones de funcionamiento originales

Linksys

Linksys Instant EtherFast EPSX3 Instrucciones de funcionamiento originales

Linksys

Linksys WPS11 ver. 3 Manual de usuario

Linksys

Linksys EFSP42 ver. 2 Manual de usuario

Linksys

Linksys WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print... Manual de usuario

Linksys

Linksys EFSP42 ver. 2 Manual de usuario

Linksys

Linksys PSUS4 - PrintServer For USB Manual de usuario

Linksys

Linksys PSUS4 - PrintServer For USB Manual de usuario

Linksys

Linksys WPS11 ver. 3 Manual de usuario

Linksys

Linksys WPS11 ver. 3 Instrucciones de funcionamiento originales

Linksys

Linksys WPS54G - Wireless-G PrintServer Print Server Manual de operación

Manuales populares de Servidor de impresión de otras marcas

Digitus

Digitus DN-13003-1 Manual de usuario

Edimax

Edimax PS-1206PWg Manual de usuario

Intellinet

Intellinet 509077 Manual de usuario

Atlantis Land

Atlantis Land NETSERVER A02-PSU_GX02 Manual de usuario

Buffalo

Buffalo LPV4-U2-300S Manual de usuario

Zonet

Zonet ZPS1000 Manual de usuario

TRENDnet

TRENDnet TEW-P11G Manual de usuario

Axis

Axis 140 BJC Manual de usuario

HP Jetdirect 280m - 802.11b Wireless Print... Manual de usuario

MicroNet

MicroNet SP766W Manual de usuario

NETGEAR

NETGEAR PS104 - Hub - EN Manual de usuario

Axis

Axis AXIS 1610 Manual de usuario

Buffalo

Buffalo LPV4-U2-300S Manual de usuario

Axis

Axis 5600+ Manual de usuario

LevelOne

LevelOne WPS-9123 Manual de usuario

NETGEAR

NETGEAR PS105 Manual de usuario

Xerox

Xerox FreeFlow Print Server V9 SP3 Manual de usuario

SEH

SEH primos Manual de usuario