NETGEAR PS104 - Hub - EN Manual de usuario

MODELPS 110

MODELPS 104

Print Server

Quick Installation Guide

Model PS104 and Model PS110 Print Server Quick Installation Guide

Instructions in this guide are for:

• Users of Microsoft

Windows 95

, Windows 98

, or Windows NT

• Users who have a network card installed with the NetBEUI protocol

All other users must refer to the

Model PS104/PS110 Print Server Resource

CD for complete

hardware and software installation instructions.

If you have not yet installed network cards in your PCs, you can use the FA310 network card, a

NETGEAR

™

product. Additionally, if you want to set up a network, you can use the Model

FB104 100 Mbps Fast Ethernet Network Starter Kit or the Model SB104 10 Mbps Starter Kit, also

NETGEAR products.

The Model PS104 or Model PS110 print server has these features:

• Support for NetBEUI, TCP/IP, and IPX/SPX protocols and Windows 95, Windows 98,

Windows NT, Novell NetWare, and UNIX operating systems

• Auto-sensing 10/100 Mbps port for 10BASE-T and 100BASE-T Ethernet connections on the

Model PS110 Print Server; 10 Mbps support on the Model PS104 Print Server

• FirstGear

™

, a software program developed by NETGEAR, which provides Windows 95,

Windows 98, andWindows NT users operating on a Microsoft network easy conﬁguration of

the print server

• Compact size that allows the print server to be used where space is limited and to be mounted

with Velcro on the side of a printer

• Built-in 4-port hub functionality (Model PS104 Print Server only)

• Flash EPROM upgradability

• Extensive LED indicators for at-a-glance status

Start Here

Features

Model PS104 and Model PS110 Print Server Quick Installation Guide

Verify that your package contains the following:

• Model PS104 or Model PS110 print server

• Power adapter

•

Model PS104/PS110 Print Server Resource

• This installation guide

• FirstGear Administration Program (1 disk)

• Warranty & Owner Registration Card

Customer Support

Call your reseller or NETGEAR Customer Support in your area if there are any wrong, missing,

or damaged parts.

Keep the carton, including the original packing materials. Use them to repack the print server if

you need to return it for repair.

To qualify for product updates and product warranty registration, complete the Warranty & Owner

Registration Card within 30 days of purchase and return it to NETGEAR, Inc.

Note:

If the supplied power adapter does not meet your country requirements, make

sure you use the appropriate power adapter as required by your national electrical

codes and ordinances.

Package Contents

Model PS104 and Model PS110 Print Server Quick Installation Guide

Start Here

Product Illustration

PWR Link/Act Alert

PRINTER

10/100 Mbps

Print Server

On=Link; Blinking=Rx

Col

NETWORK

PS104

MODEL

8515FA

PRINTER

LEDs NETWORK

LEDs

PWR LED

Front Panel of the Model PS104 Print Server

Front Panel of the Model PS110 Print Server

PWR Link/Act Alert

PRINTER 1

Link/Act Alert

PRINTER 2

10/100 Mbps

Print Server

Link 100M Rx Tx Col

NETWORK

PS110

MODEL

PRINTER 1

LEDs NETWORK

LEDs

PRINTER 2

LEDs

PWR LED

Model PS104 and Model PS110 Print Server Quick Installation Guide

LEDs

The following table describes the activity of the 8 LEDs on the front panel of the Model PS104

Print Server and the 10 LEDs on the Model PS110 Print Server.

Label Color Activity Description

PWR (power) Green On Power is supplied to the print server.

PRINTER,

PRINTER 1, or

PRINTER 2

Link/Act Green On A printer is connected to the port.

Off There is no printer connected to the port.

Blinking Data transmission is occurring on the port.

Alert Amber On The connected printer is ofﬂine, is out of paper, or has a

paper jam.

Off The connection between the printer and print server is good.

NETWORK

(On the

Model PS104)

Link/Rx Green Off There is no link between the port and the network.

On The 10 Mbps half-duplex link between the print server and the

network is good.

Blinking Incoming data is on the port.

Col

(collision) Amber Blinking Data collision is occurring on the network. Note that

occasional collisions are normal.

NETWORK

(On the

Model PS110)

Link Green On The link between the port and the network is good.

100M Green On The link between the port and the network is a 100 Mbps half-

duplex connection.

Off The link between the port and the network is a half-duplex 10

Mbps connection.

Tx Green Blinking The print server is sending data out of the port.

Rx Green Blinking The print server is receiving data on the port.

Col

(collision) Amber Blinking Data collision is occurring on the network. Note that

occasional collisions are normal.

Model PS104 and Model PS110 Print Server Quick Installation Guide

Rear Panel

The rear panel of the Model PS104 Print Server has one parallel PRINTER port, and the Model

PS110 Print Server has two parallel ports for printers (PRINTER 1 and PRINTER 2). The ports on

both print servers accept either printers or another parallel device such as a plotter. Because the

Model PS110 Print Server has two PRINTER ports, two parallel devices can be connected and can

operate simultaneously.

The Model PS104 Print Server has four 10BASE-T network ports, and the Model PS110 Print

Server has one 10/100BASE-T network port. The Model PS104 Print Server has a Normal/Uplink

push button switch to set port 1.

Both models have a power adapter receptacle that accepts a 12V DC power adapter.

Normal/Uplink Push Button (Model PS104 Only)

The Normal/Uplink push button on the Model PS104 Print Server allows you to select Normal

(MDI-X) or Uplink (MDI) wiring for NETWORK port 1, eliminating the need to use a crossover

cable. Ports 2 through 4 on the Model PS104 Print Server are permanently conﬁgured for Normal

wiring; the one network port on the Model PS110 Print Server is permanently conﬁgured for

Uplink wiring.

432

NETWORK 1

PRINTER 12VDC 1.2A

Normal/Uplink

8514FA

PRINTER

(parallel) port NETWORK ports

(10BASE-T connectors)

Rear Panel of the Model PS104 Print Server

Rear Panel of the Model PS110 Print Server

Normal/Uplink

push button

Power adapter

receptacle

NETWORK

PRINTER 2 PRINTER 1 12VDC 1.2A

PRINTER 2

(parallel) port PRINTER 1

(parallel) port NETWORK port

(10/100BASE-T

connector)

Power adapter

receptacle

Model PS104 and Model PS110 Print Server Quick Installation Guide

This section illustrates some examples of network conﬁgurations incorporating the Model PS104

or Model PS110 print server.

Typical Applications

123

NETWORK 4

PRINTER 12VDC 1.2A

Normal/Uplink

8572FA

Limited to 3 m

in length

Model PS104 Print Server

123

NETWORK 4

PRINTER 12VDC 1.2A

Normal/Uplink

Limited to 3 m

in length

10 Mbps

100 Mbps

Key

Model PS104 Print Server

NETGEAR Model

RT328 router

NETWORK

PRINTER 1 PRINTER2 12VDC 1.2A

8575FA

Limited to 3 m

in length

Model PS110 Print Server NETGEAR Model

DS108 hub

Auto 10/100 Mbps

DUAL SPEED

123

NETWORK 4

PRINTER 12VDC 1.2A

Normal/Uplink

Limited to 3 m

in length

Model PS104 Print Server

NETGEAR Model

EN108 hub

1234 56 78

Pwr

Col

EN108

10 BASE-T HUB

10 Mbps

100 Mbps

Key

Model PS104 and Model PS110 Print Server Quick Installation Guide

The print server can be placed on a desktop or any ﬂat surface. To save work space, the print

server can also be mounted with Velcro strips on the side of a printer.

Connect a cable (not provided) from the printer to the parallel PRINTER port on the print server.

If you are connecting one printer to the Model PS110 Print Server, you can use either of the ports.

The Model PS104 Print Server has four 10BASE-T network ports; the Model PS110 Print Server

has one 10/100BASE-T network port.

Use the following table for setting the push button switch and for selecting either a crossover or

straight-through cable when connecting the print server to other devices.

Connecting

Network Port Connecting

Device Cable Used

Model PS104 Print Server

Port 1 set to Uplink Hub or switch Straight-through cable

Port 1 set to Normal PC or router Straight-through cable

Port 2 through 4 PC Straight-through cable

Model PS110 Print Server Hub or switch Straight-through cable

PC Crossover cable

Note:

Ethernet speciﬁcations limit the twisted pair cable (called a twisted pair

segment) extended from a network port to 100 meters in length.

Install the Print Server

Connect the Printer Cables

3Connect the Network Cables

Model PS104 and Model PS110 Print Server Quick Installation Guide

Connect the power adapter ﬁrst to the power receptacle on the rear panel of the print server and

then to the power outlet on the wall. When power has been applied to the print server:

• The green Pwr (power) LED on the front panel is on.

• On the Model PS104 Print Server, the green Link/Rx LED on each connected network port

is on.

• On the Model PS110 Print Server, the Link LED on the connected network port is on.

• The green Link/Act LED on the connected PRINTER, PRINTER 1, or PRINTER 2 port

is on.

If there are any problems, refer to “Troubleshooting Information.”

Make sure the network interface cards installed in the workstations are in working condition and

the software driver has been installed on the cards.

If required, verify the integrity of the print server by resetting it. Turn power to the print server off

and then back on. If the problem continues and you have completed all the preceding diagnoses,

contact NETGEAR Customer Support. For the telephone number of the representative in your

area, see “Customer Support” on the back cover of this installation guide.

4Verify Power

Model PS104 and Model PS110 Print Server Quick Installation Guide

If you are using Windows 95, Windows 98, or Windows NT, this section provides you with

information on how to:

• Install FirstGear on the network administrator’s PC

• Conﬁgure your print server from the network administrator’s PC

• Set up each Windows PC so that it can recognize the print server

Before proceeding with these instructions, make sure you have assigned a name to your

workgroup.

Install the FirstGear Administration Program

FirstGear, a software program used with NETGEAR products for quick and easy installation, is

provided on one disk included in your package contents.

To install FirstGear on your PC:

1. Insert the FirstGear Installation Disk in DriveA.

2. Double-click on DriveA.

3. Double-click on “Setup” to start the installation process and open the “Welcome”

window.

There is more than one Setup ﬁle on the disk. Make sure you select the application ﬁle (if

viewing with icons, it looks like a PC).

4. Click on “Next” to open the “Choose Destination Location” window.

5. Click on “Next” to install the FirstGear Administration Program in the Program Files

folder.

6. Click on “Next” to title the program folder “FirstGear”

(the default name).

Verify that the information on the screen is correct.

7. Click on “Next” when the “Start Copying Files” window opens.

8. Click on “Yes” when the “Setup Complete” window opens if you want to read the

ReadMe ﬁle, and then click on “Finish.”

The FirstGear Administration Program is installed on your network administrator’s PC.

ConﬁgureYour Print Server

Before conﬁguring your print server, make sure that the network card in the administrator’s PC is

connected to the powered-on print server. Also make sure that the network card is conﬁgured to

use the NetBEUI protocol.

To conﬁgure your print server, access the FirstGear Administration Program by following the

steps outlined in this section.

Click on “Start” on the desktop, select “Programs,” select “FirstGear,” and then select

“Print Server Administration” to execute the FirstGear Print Server Administration

Program and to open the “Print Server Administration Program” window.

5Install and Conﬁgure

Otros manuales para PS104 - Hub - EN

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Servidor de impresión de NETGEAR

NETGEAR

NETGEAR PS121v2 - USB Mini Print Server Manual de usuario

NETGEAR

NETGEAR WGPS606 Manual de usuario

NETGEAR

NETGEAR PS111W - Print Server - Parallel Manual de instalación y funcionamiento

NETGEAR

NETGEAR PS121v2 - USB Mini Print Server Manual de operación

NETGEAR

NETGEAR WGPS606 Manual de usuario

NETGEAR

NETGEAR WGPS606NA Manual de usuario

NETGEAR

NETGEAR PS101 Manual de usuario

NETGEAR

NETGEAR PS101NA Manual de usuario

NETGEAR

NETGEAR PS110 - Print Server - Parallel Manual de usuario

NETGEAR

NETGEAR PS121 - USB Mini Print Server Manual de usuario

NETGEAR

NETGEAR FWG114P - ProSafe 802.11g Wireless Firewall Manual de usuario

NETGEAR

NETGEAR PS111W - Print Server - Parallel Manual de usuario

NETGEAR

NETGEAR PS121v2 - USB Mini Print Server Manual de usuario

NETGEAR

NETGEAR PS121 - USB Mini Print Server Manual de usuario

NETGEAR

NETGEAR PS113 - 10/100 Print Server Manual de usuario

NETGEAR

NETGEAR PS111W - Print Server - Parallel Manual de usuario

NETGEAR

NETGEAR PS121v2 - USB Mini Print Server Manual de usuario

NETGEAR

NETGEAR PS104 - Hub - EN Manual de usuario

NETGEAR

NETGEAR PS121v2 - USB Mini Print Server Manual de usuario

NETGEAR

NETGEAR PS101 Manual de usuario

NETGEAR

NETGEAR PS121 - USB Mini Print Server Manual de usuario

NETGEAR

NETGEAR PS111W - Print Server - Parallel Manual de usuario

NETGEAR

NETGEAR PS104 - Hub - EN Manual de instalación y funcionamiento

NETGEAR

NETGEAR PS104 - Hub - EN Manual de instalación y funcionamiento

Manuales populares de Servidor de impresión de otras marcas

Digitus

Digitus DN-13003-1 Manual de usuario

Edimax

Edimax PS-1206PWg Manual de usuario

Intellinet

Intellinet 509077 Manual de usuario

Atlantis Land

Atlantis Land NETSERVER A02-PSU_GX02 Manual de usuario

Buffalo

Buffalo LPV4-U2-300S Manual de usuario

Zonet

Zonet ZPS1000 Manual de usuario

TRENDnet

TRENDnet TEW-P11G Manual de usuario

Axis

Axis 140 BJC Manual de usuario

HP Jetdirect 280m - 802.11b Wireless Print... Manual de usuario

MicroNet

MicroNet SP766W Manual de usuario

Axis

Axis AXIS 1610 Manual de usuario

Buffalo

Buffalo LPV4-U2-300S Manual de usuario

Axis

Axis 5600+ Manual de usuario

LevelOne

LevelOne WPS-9123 Manual de usuario

Xerox

Xerox FreeFlow Print Server V9 SP3 Manual de usuario

SEH

SEH primos Manual de usuario

D-Link

D-Link DP-101P+ Manual de usuario

Digisol

Digisol DG-PS1010U Manual de usuario