a. Find your wireless network in the first field. You can
select ‘Other’ if you do not see your wireless network.
b. Enter your Wi-Fi password. If your wireless network does not
have a password, click on the ‘No Wi-Fi password’ box. Then click
‘Next’, select your timezone.
c. Follow the instructions on the screen and move your phone
speaker close to the camera’s microphone. Before doing so, make
sure you are in a quiet environment without any noise interference
and make sure your phone is not on silent. Then click ‘send sound
wave’.
d. You will hear a scrambled sound being played from your
phone. Keep your phone still and wait for the duration of the
transmission, before you move your phone away. Afterwards, the
voice prompt will indicate that the binding was successful and the
app will redirect to the camera view interface automatically.
e. If you do not hear the voice prompt say, ‘binding successful’,
you can try again by clicking the ‘Send sound wave’ or click on the
hyperlink and follow the instructions.
2.4 Camera Device and Phone Synchronization
Click Add Camera button, click on ‘connecting my camera’ Step 1:
Check to see if the front LED light is flashing: After powering on
the camera, the LED light should be flashing blue, click on ‘Next’
and proceed to Step 2.
Step 2: Connect to your wifi network(802.11 b/g/n 2.4GHz):
-5-
