Page 5of 6
Rear Panel Connectors and LED Indicators
Transmitter connectors and LED indicators on the rear panel
The connectors are;
1. IN1, IN2, IN3, and IN4, 4 3G/HD/SD-SDI or ASI Inputs
2. L01, L02, L03, and L04, 4 3G/HD/SD-SDI or ASI Looping Outputs
3. TX, fiber connector is Type FC/PC
The LED indicators are;
1. DET, yellow means no 3G/HD/SD-SDI or ASI signal is detected, green means
3G/HD/SD-SDI or ASI signal is detected.
2. 3G/SD, off not used.
3. PWR, red when the system is powered on.
I
Receiver connections and LED indicators on the rear panel
The connectors are; arranged,
1. OUT11 and OUT12, 3G/HD/SD-SDI Outputs from IN1.
2. OUT21 and OUT22, 3G/HD/SD-SDI Outputs from IN2.
3. OUT31 and OUT32, 3G/HD/SD-SDI Outputs from IN3.
4. OUT41 and OUT42, 3G/HD/SD-SDI Outputs from IN4.
5. RX, fiber connector is Type FC/PC
The LED indicators are;
1. DET, yellow means no 3G/HD/SD-SDI or ASI signal is detected, green means
3G/HD/SD-SDI or ASI signal is detected.
2. 3G/SD, white when output is 3G/HD-SDI, green when output is SD-SDI.
3. PWR, red when the system is powered on.
