Linear Technology DC832 Manual de usuario

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 832

DUAL OUTPUT LOW NOISE LDO REGULATORS

LT3028

DESCRIPTION

Demonstration circuit 832 is a dual output and dual in-

put regulator consisting of two identical LDO linear regu-

lators, based on the LT3028 monolithic linear regulator.

Each independent input has a voltage range of 2.3V to

20V, with one output (Vout1) capable of delivering up to

500mA of output current, and the other output (Vout2)

capable of delivering up to 100mA of output current.

The DC supply current is typically only 50uA (for the

entire IC) at no load. The LT3028 comes in either a 16-

lead DFN package or TSSOP package, both of which

have an exposed pad on the bottom-side of the IC for

better thermal performance. The DC832 comes installed

with ceramic capacitors, because of the LT3028 ability of

maintaining stability with ceramic output capacitors.

There are ceramic bypass capacitors on each output for

extra low noise performance. These features make the

DC832 demo board an ideal circuit for use in battery-

powered, hand-held applications or noise sensitive ap-

plications.

Gerber files for this circuit are avail-

able. Call the LTC Factory.

QUICK START PROCEDURE

The DC832 is easy to set up to evaluate the perform-

ance of the LT3028. For a proper measurement

equipment configuration, set up the circuit according

to the diagram in Figure 1.

Please follow the procedure outlined below for proper

operation.

1. Connect the input power supply to the Vin and

GND terminals. Connect the loads between

the Vout and GND terminals. Refer to figure 1

for the proper measurement equipment setup.

2. Before proceeding to operation, insert jump-

ers JP1 and JP2 into the OFF positions, jump-

ers JP3 and JP4 into the voltage options of

choice (2.5V, 3.3V, and 5V).

3. Apply 6.5V at Vin. Measure both Vouts; they

should read 0V.

4. Turn on Vout1 and Vout2 by changing jump-

ers JP3 and JP4 from the OFF positions to the

ON positions. Both output voltages should be

within a tolerance of +/- 2%.

5. Vary the input voltage from 6.5V to 20V. Both

output voltages should be within +/- 3.3% tol-

erance.

6. Vary Vout1 load current from 0 to 500mA. Its

output voltages should be within a tolerance

of +/- 4%.

7. Vary Vout2 load current from 0 to 100mA. Its

output voltages should be within a tolerance

of +/- 4%.

8. Observe both output voltages AC-coupled;

they should measure noise voltages of less

than 5mVAC each. Refer to Figure 2 for

proper measurement technique.

9. When finished, insert jumpers JP1 and JP2 to

the OFF position(s) and disconnect the power.

Warning - If the power for the demo board is carried in

long leads, the input voltage at the part could “ring”,

which could affect the operation of the circuit or even

exceed the maximum voltage rating of the IC. To elimi-

nate the ringing, insert a small tantalum capacitor (for

instance, AVX part # TAJW106M025R) on the pads be-

tween the input power and return terminals on the bot-

tom of the demo board. The (greater) ESR of the tanta-

lum will dampen the (possible) ringing voltage due to

the use of long input leads. On a normal, typical PCB,

with short traces, the capacitor is not needed.

Downloaded from Arrow.com.

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 832

DUAL OUTPUT LOW NOISE LDO REGULATORS

Figure 2. Measuring Input or Output Ripple

Figure1. Proper Measurement Equipment Setup

Downloaded from Arrow.com.Downloaded from Arrow.com.

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 832

DUAL OUTPUT LOW NOISE LDO REGULATORS

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

Otros manuales de Placa madre de Linear Technology

Linear Technology

Linear Technology DC2001A Guía de configuración rápida

Linear Technology

Linear Technology DC2455A-C Manual de usuario

Linear Technology

Linear Technology DC1274A Guía de configuración rápida

Linear Technology

Linear Technology DC426B Manual del operador

Linear Technology

Linear Technology DC814 Manual de usuario

Linear Technology

Linear Technology DC2518A Guía de configuración rápida

Linear Technology

Linear Technology Analog Devices DC2564A Guía de configuración rápida

Linear Technology

Linear Technology LT3460ESC6 Manual de usuario

Linear Technology

Linear Technology DC1697A Guía de configuración rápida

Linear Technology

Linear Technology DC2166A Guía de configuración rápida

Linear Technology

Linear Technology DC2049A Guía de configuración rápida

Linear Technology

Linear Technology DC1624A Guía de configuración rápida

Linear Technology

Linear Technology DC1795A Guía de configuración rápida

Linear Technology

Linear Technology 789 Manual de usuario

Linear Technology

Linear Technology DC2581A Guía de configuración rápida

Linear Technology

Linear Technology DC1771A Guía de configuración rápida

Linear Technology

Linear Technology DC2455A-B Guía de configuración rápida

Linear Technology

Linear Technology DC2347A Guía de configuración rápida

Linear Technology

Linear Technology DC2269A-A Guía de configuración rápida

Linear Technology

Linear Technology DC1743A Guía de configuración rápida

Linear Technology

Linear Technology DC1759A Guía de configuración rápida

Linear Technology

Linear Technology 461A-A Manual de usuario

Linear Technology

Linear Technology DC1923A Manual de usuario

Linear Technology

Linear Technology DC1889A Guía de configuración rápida

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario