Lincoln Electric LN-742 Manual de usuario

LN-742 and LN-742H

Semiautomatic Constant Speed Wire Feeders

LN-742 and LN-742H

• LN-742 model feeds up to 1/16”

(1.6mm) solid and 3/32” (2.4mm)

flux-cored wires, from 50-770 inch-

es per minute (1.27-19.5 m/min)

wire feed speed.

• LN-742H high speed model feeds

up to .045” (1.2mm) solid or flux-

cored wires, from 80-1200 inches

per minute (2.03-30.5 m/min) wire

feed speed.

• 2 or 4 roll wire drive system for

positive wire feeding.

• Unique variable wire run-in speed

and acceleration provide controlled

arc starting. Matches starting per-

formance to power source starting

dynamics, wire type, welding proce-

dures, and operator technique.

• Dynamic braking system stops wire

feed motor quickly to minimize

crater sticking problems.

• Solid state control compensates for

wire drag and input line variations to

maintain accurate wire feed speed.

• Tool-less quick release wire drive

tension system and gun cable

connections for easy wire or gun

changes.

• Presettable wire feed speed, run-in

speed, and cold inch speed.

• Trigger mode selection for standard

2-step, interlocking 4-step and

timed spot welding.

• Gas solenoid and timer controls for

preflow and postflow gas, burnback

and spot times.

• Cold inch and gas purge control.

• Digital voltmeter with auto-polarity

and memory feature to display and

recall the last arc voltage reading.

• Optional remote voltage control kit

provides procedure control at

LN-742.

• Optional wire feeder remote control

kit provides remote voltage and wire

feed speed control up to 16 ft. (5m)

from wire feeder. Ideal for boom

mounted feeders and where the

operator wants control at the arc.

• 3 year warranty on parts and labor.

• Manufactured under a quality

system certified to ISO 9002

requirements.

The LN-742 is a semiautomatic con-

stant speed wire feeder for MIG and

flux-cored arc welding. Powered by a

new 42 volt motor drive system, the

LN-742 is available in standard or high

speed models, with either a 2 or 4 roll

wire drive system.

Designed for welding procedure flexi-

bility and simplicity, the LN-742’s

keypad panel provides finger touch

control for welding procedure parame-

ters. In addition, a unique arc starting

control system allows you to set run-in

wire feed speed and acceleration for

smooth, clean arc starts. This feature

is ideal for critical arc starting on mild

and low alloy steels, stainless steels,

aluminum, and alloy materials where

starting precision is a must.

The LN-742’s digital meter can be set

for English or metric display, allowing

ADVANTAGE

LINCOLN

either inches per minute or meters per

minute procedure setting. This makes

the unit ideal for multinational corpora-

tions and contractors who require

procedure flexibility.

Wire Speed Wire Size Range

Product Ordering Range in. (mm) Weight Dimensions

Name Information IPM (m/min) Solid Cored Input (net) HxWxD

LN-742 K617-1 50-770 .025-1/16” .045-3/32”

2 roll (1.27-19.5) (0.6-1.6) (1.2-2.4) 24 lbs. 10.9 x 9.8 x 9.6 in.

42 VAC (10.9 kg) (277 x 249 x 244mm)

LN-742H K617-2 80-1200 .025-.045” .025-.045”

2 roll (2.03-30.5) (0.6-1.2) (0.6-1.2) 50/60 Hz

LN-742 K618-1 50-770 .025-1/16” .045-3/32” 4 Amps

4 roll (1.27-19.5) (0.6-1.6) (1.2-2.4) 28.7 lbs. 11.1 x 11.6 x 9.7 in.

(13.0 kg) (282 x 295 x 246mm)

LN-742H K618-2 80-1200 .025-.045” .025-.045”

4 roll (2.03-30.5) (0.6-1.2) (0.6-1.2)

Cold Inch Control Gas Purge Control

Wire feed speed and inch

speed controls

Keys used to increase or

decrease wire feed speed

and inch speed

Trigger Mode Control

Preflow, Postflow, Burnback

and Spot Time Controls

Large digital display for easy

viewing of adjustable welding

parameters

A CLOSER LOOK

TECHNICAL

SPECIFICATIONS

www.lincolnelectric.com

INPUT CABLE ASSEMBLIES

14 Pin/Twist-Mate™ Cables

K591

Rated 400 amps, 60% duty cycle:

2/0 (67mm2) cable with

Twist-Mate™ and 14 pin MS-type

connector. 10, 25 and 50 ft. (3, 8,

15m) lengths.

Order K591-10, -25, or -50.

K593

Same as K591 but includes gas and

water hoses in 10 ft. (3.0 m) length.

Order K593-10.

14 Pin/Stud Cables

K592

Rated 600 amps, 60% duty cycle:

3/0 (85mm2) cable with lugs and 14

pin MS-type connector. 10, 25 and

50 ft. (3, 8, 15m) lengths.

Order K592-10, -25, or -50.

K619

Rated 350 amps, 60% duty cycle: 1/0

cable (53mm2) with lugs and 14 pin

MS-type connector. 10, 25 and 50 ft.

(3, 8, 15m) lengths.

Order K619-10, -25 or -50.

REQUIRED

OPTIONS

THE TOTAL

SOLUTION

DRIVE ROLL AND

GUIDE TUBE KITS

2 roll 4 roll

Steel Wire Sizes:

.023-.025 (0.6mm) solid KP653-025S KP655-025S

.030 (0.8mm) solid KP653-030S KP655-030S

.035 (0.9mm) solid KP653-035S KP655-035S

.035 (0.9mm) cored KP653-035C KP655-035C

.045-.052 (1.2-1.3mm) solid KP653-052S KP655-052S

.045-.052 (1.2-1.3mm) cored KP653-052C KP655-052C

.052-1/16 (1.3-1.6mm) solid or cored(1) KP653-1/16 KP655-1/16

.068-3/32 (1.7-2.4mm) cored(1) KP653-3/32 KP655-3/32

Aluminum Wire Sizes:

.035 (0.9mm) KP654-035A KP656-035A

3/64 (1.2mm) KP654-3/64A KP656-3/64A

1/16 (1.6mm) KP654-1/16A KP656-1/16A

(1) Not for LN-742H models.

Choose from a complete line of

Lincoln products to generate the total

solution for your welding application:

• CV-250, CV-300, CV-400, CV-655

CV400-I, CV500-I, DC-400,

DC-600*, and DC-655.

• Invertec™ V350-PRO and V300-I

power sources.

• Ranger 9, Ranger 275, Ranger 300

DLX, Commander 300* and 500*

engine driven welders.

• MIG and flux-cored gun and cable

assemblies.

• A full line of MIG and FCAW wires.

* Must buy optional 42VAC Kit for Codes below

10500.

NOTE A: Specify length when

ordering input cable assemblies.

See Required Options.

INPUT CABLE ASSEMBLY SELECTION GUIDE

Semiautomatic

Wire Feeder

Semiautomatic

Wire Feeder

Magnum gun and

cable assembly

DC-600 (Below

code 10500)

14 Pin/Stud Input Cable Assemblies

K592 600 amp, 60% duty cycle.

K619 350 amp, 60% duty cycle.

NOTE B: Connections are for current

equipment design. Subject to change

without notice.

14 Pin

Magnum gun and

cable assemblies

Terminal/Stud Input Cable Assemblies

K592 600 amp, 60% duty cycle.

K619 350 amp, 60% duty cycle.

42 Volt Transformer

(K1520-1)

Stud

CV-250

CV-300

V350-PRO

CV400-I

CV500-I

V300-I

Twist-Mate

14 Pin

14 Pin/Twist-Mate™ Input Cable Assemblies

K591 400 amp, 60% duty cycle.

K593 400 amp, 60% duty cycle. Includes gas

and water hoses. 10 ft. (3.0 m) only.

Semiautomatic

Wire Feeder Magnum gun and

cable assembly

CV-400

CV-655

DC-400

DC-600 (Above

code 10500)

DC-655

Ranger 9

Ranger 275

Ranger 300 DLX

Commander 300*

Commander 500*

Stud

14 pin

*Requires K1597-2: 42 VAC Kit.

www.lincolnelectric.com

OPTIONS

AVAILABLE

Caster Kit - Light Duty

Mounts to the K1524-1 wire reel

stand. Allows for easy movement

of wire feeder. Order K1556-1.

K1556-1

READI-REEL®ADAPTERS

30 lb. (14 kg) Adapter

Adapts 22-30 lb. (10-13.6 kg) Lincoln

Readi-Reels of electrode to 2”

(51mm) spindle. Order K363P.

Quantity of 15, Order K363P-15.

K1524-1

K438

K363P

COIL ADAPTER

60 lb. (27.2 kg) Adapter

Adapts 60 lb. (27.2 kg) coils of Lincoln

electrode to 2” (51mm) spindle.

Order K1504-1.

K1504-1

WIRE REEL STAND

For use with 50-60 lb. (22.7-27.2 kg)

coils. Includes 1” (25.4mm) spindle,

wire reel, lift bail and dust shield.

Order K303.

K303

50-60 lb. (27.2 kg) Adapter

Adapts 50-60 lb. (22.7-27.3 kg)

Lincoln Readi-Reels of electrode to 2”

(51mm) spindle. Order 438.

Quantity of 15, Order K438-8.

SPINDLE ADAPTERS

For Readi-Reels and Spools

2” O.D. spindle for mounting Readi-

Reels and 2” (51mm) I.D. spools up to

60 lb. (27.2 kg) capacity to a K303

stand. Order K162-1.

For 14 lb. (6 kg) Innershield®Coils

Permits 14 lb. (6 kg) Innershield

electrode coils to be mounted on 2”

(51mm) O.D. spindles. Order K435.

Universal Wire Reel Stand

For use with Lincoln 10-60 lb.

(4.5-27.2 kg) wire packages that use a

2” (51mm) spindle. Hole in stand fits

over lift bail. Optional swivel platform

is K1557-1. Order K1524-1.

Water Solenoid Kit

Includes solenoid and fittings for use

with water-cooled guns and Magnum

water coolers. Order K590-1.

Magnum®Products, including:

200-550 amps, air-cooled, and

water-cooled gas-shielded welding

guns.

Fume extraction systems and guns.

(K179 not recommended as it would

only run full speed).

Innershield Electrode Guns

Available 250-600 amps.

OPTIONS

AVAILABLE

K1557-1

K1555-1

K1520-1

REMOTE CONTROL KITS

K589-1

Portable pendant connects to LN-742

for remote control of arc voltage and

wire feed speed up to 16 ft. (5m)

away from wire feeder. Order K589-1.

K857

For remote adjustment of output volt-

age. Consists of a control box, four

conductor cable, and 6 pin MS-type

(Amphenol) connector.

28 ft. cable - Order K857.

100 ft. cable - Order K857-1.

K775

For remote adjustment of output volt-

age. Consists of a control box with 28

ft. (8.5m) of four conductor cable for

terminal strip connection.

Order K775.

ADAPTERS

K864

Y connection adapter for connecting

Lincoln 6 pin plug K857 remote

voltage control kit and 14 pin input

cable assemblies to power sources

with a 14 pin receptacle. Order K864.

K178-1

Swivel Platform

Mounts to the lift bail on the power

source and bottom of the K1524-1.

Wire feeder may be lifted off if need-

ed. Compatible with Light Duty

Caster Kit. Includes “lazy susan”

parts tray. Order K1557-1.

Insulated Lift Bail

Allows the entire wire feeder to

be hung from a crane or hook.

Use with K1524-1. Order K1555-1.

Water Solenoid Kit

Includes solenoid and fittings for use

with water-cooled guns and Magnum

water coolers. Order K590-1.

Water Connection Kit

Same as K590-1 except does not

include solenoid for water coolers

requiring continuous flow.

Order K590-2.

Undercarriage

Includes mounting frame, front

casters, rear wheels and handle.

For use with K303 only. Order K163.

www.lincolnelectric.com

K864

Swivel Platform For mounting wire

feeder on top of suitable Lincoln

power sources when using K303 wire

reel stand. Order K178-1.

115V/42V Transformer Kit

Provides a way to use the LN-742

on power sources that have 115V

AC available on terminal.

Order K1520-1.

Semiautomatic Wire Feeders

E8.20 6/00

THE

LINCOLN ELECTRIC

COMPANY

Local Sales and Service through Global

Subsidiaries and Distributors

Cleveland, Ohio 44117-1199 U.S.A

TEL (216) 481-8100

FAX (216) 486-1751

WEB SITE www.lincolnelectric.com

DISTRIBUTED BY:

REMOTE VOLTAGE CONTROL SELECTION PROCESS

RECOMMENDED

OPTIONS

DC-600

Ranger 9

Ranger 275

Ranger 300 DLX

Commander 300

Commander 500

CV-250

CV-300

*CV-400

*CV-655

*DC-400

*DC-655

V350-PRO

Terminal Strip

K775

K857

Wire Feeder Input Cable Asbly.

(Terminal Strip)

Wire Feeder Input Cable Asbly.

(14 pin)

Wire Feeder Input Cable Asbly.

(14 pin)

K864 Adapter

6 Pin

14 Pin

* Equipped with 14 pin MS-type

connections as standard, and each

model has easy access to terminal strip

connection if required.

Subject to change without notice.

Customer Assistance Policy

The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs

of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our

customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect

to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to such information

or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has been given, nor does

the provision of information or advice create, expand or alter any warranty with respect to the sale of our products.

Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of

the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.

Otros manuales para LN-742

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de soldadura de Lincoln Electric

Lincoln Electric

Lincoln Electric Magnum PRO Curve HDE 350 Manual de usuario

Lincoln Electric

Lincoln Electric MAGNUM 550 Manual de usuario

Lincoln Electric

Lincoln Electric IM10263 Manual de usuario

Lincoln Electric

Lincoln Electric STATIFLEX 400-MS Manual de usuario

Lincoln Electric

Lincoln Electric DIX WD 300 Instrucciones de montaje

Lincoln Electric

Lincoln Electric US-M1745-LS Manual de usuario

Lincoln Electric

Lincoln Electric Activ8X Manual de usuario

Lincoln Electric

Lincoln Electric IM-267 Manual de usuario

Lincoln Electric

Lincoln Electric LN-25 Manual de usuario

Lincoln Electric

Lincoln Electric US-CW338 Manual de usuario

Lincoln Electric

Lincoln Electric Innershield NR-212 Manual de usuario

Lincoln Electric

Lincoln Electric MAGNUM 250 LX Manual de usuario

Lincoln Electric

Lincoln Electric PIPELINER LN-23P Manual de usuario

Lincoln Electric

Lincoln Electric SVM154-A Manual de usuario

Lincoln Electric

Lincoln Electric 900 Manual de usuario

Lincoln Electric

Lincoln Electric Pyrotome SE Instrucciones de montaje

Lincoln Electric

Lincoln Electric MIL 800HPNi Manual de usuario

Lincoln Electric

Lincoln Electric IM613-B Manual de usuario

Lincoln Electric

Lincoln Electric Innershield NR-131 Manual de usuario

Lincoln Electric

Lincoln Electric CAN-F30 Manual de usuario

Lincoln Electric

Lincoln Electric K5334-1 Manual de usuario

Lincoln Electric

Lincoln Electric LINC FEED 33 Manual de usuario

Lincoln Electric

Lincoln Electric LN-15 Manual de usuario

Lincoln Electric

Lincoln Electric LN-10 ZIPLINE BOOM PACKAGE Manual de usuario

Manuales populares de Accesorios de soldadura de otras marcas

Weco

Weco Trolley R Manual de usuario

Cornwell Tools

Cornwell Tools MMWC1 Manual de usuario

Dohle

Dohle ExOn2A Manual de usuario

Nederman

Nederman Fume Eliminator FE 840/2500/P150 Manual de usuario

3M Speedglas 9100 Series Manual de usuario

Miller Electric

Miller Electric OM-842 Manual de usuario

Miller

Miller A-200 Series Manual de usuario

Abicor Binzel

Abicor Binzel ABIMIG WT Series Manual de usuario

optrel

optrel lifeflip autopilot Manual de usuario

Miller

Miller MIGmatic M-25 Manual de usuario

Tregaskiss

Tregaskiss TOUGH GUN TT3 Reamer Manual de usuario

Abicor Binzel

Abicor Binzel xFUME PRO Manual de usuario

Sealey

Sealey SR20.V2 Manual de usuario

iWeld

iWeld NORED EYE Manual de usuario

Sthor

Sthor 74483 Manual de usuario

Leister

Leister TWINNY T7 Manual de usuario

Miller

Miller I-22 CE Manual de usuario

LAHTI PRO

LAHTI PRO L1540400 Manual de usuario