Lincat GS3 Manual del propietario

IS 215 ECN 3607 Page 1 of 8

Installation, Operating and Servicing

Instructions

Silverlink 600 Electric Griddles

GS3, GS3C, GS4, GS4C, GS6, GS6C,

GS65, GS6/T, GS6/TR, GS6/TFR, GS7,

GS7C, GS7/R, GS9

Please make a note of your product details for

future use:

Date Purchased:_________________________

Model Number:__________________________

Serial Number:__________________________

Dealer:_________________________________

_______________________________________

IS 215 ECN 3607 Page 2 of 8

CONTENTS

Important Information

Warnings and Precautions

Technical Data

Checklist of Enclosures

Installation and Commissioning

3-5

Operating Instructions

Cleaning

5-6

Servicing, Maintenance and Component Replacement

Fault Finding

Spare Parts List

6-7

Accessories

Service Information and Guarantee

IMPORTANT INFORMATION

Read these instructions carefully before using this product, paying particular

attention to all sections that carry warning symbols, caution symbols and notices.

Ensure that these are understood at all times.

WARNING!

This symbol is used whenever there is a risk of personal injury.

CAUTION!

This symbol is used whenever there is a risk of damaging your Lincat product.

NOTE:

This symbol is used to provide additional information, hints and tips.

KEEP THIS MANUAL FOR FUTURE REFERENCE

IS 215 ECN 3607 Page 3 of 8

WARNINGS AND PRECAUTIONS

This appliance must be installed, commissioned and serviced by a qualified person

in accordance with national and local regulations in force in the country of

installation.

If the supply cord is damaged, it must be replaced by the manufacturer, its service

agent or similarly qualified person.

Ensure that the plug/socket is accessible at all times.

Strip plastic coating and clean the appliance before use.

During operation parts may become hot - avoid accidental contact.

Disconnect this appliance before servicing, maintenance or cleaning.

TECHNICAL DATA

Model

Height mm)

Width (mm)

Depth (mm)

Weight (kg)

GS3, GS3C

330

300

600

GS4, GS4C

450

GS6, GS6C, GS6/T,

GS6C/T, GS6/TR, GS6/TFR

600

GS65

600

GS7, GS7C, GS7/R

750

GS9

900

CHECK LIST OF ENCLOSURES

Warranty card

Instructions manual

INSTALLATION AND COMMISSIONING

This appliance must be earthed.

An equipotential bonding terminal is provided to allow cross bonding with other

equipment.

IS 215 ECN 3607 Page 4 of 8

If replacing the plug connect the terminals as follows:

Green and Yellow wire Earth E

Blue wire Neutral N

Brown wire Live L

Means of isolation with at least 3mm contact separation in all poles must be

incorporated into the fixed wiring of this appliance.

The fixed wiring insulation must be protected by insulated sleeving having a

temperature rating of 600C.

Supply cords shall be oil resistant, sheathed flexible cable not lighter than ordinary

polychloroprene or equivalent elastomer sheathed cord (code 60245 IEC 57)

Install this appliance on a level surface ensuring all vents are unobstructed. Any

partitions, walls or furniture must be of non-combustible material. Minimum

distances A 100mm B 1000mm –see Fig 1.

Fig 1

IS 215 ECN 3607 Page 5 of 8

Power Ratings

Model

Supply 1N~+E

Supply 3N~+E

GS3, GS3C

2.0

8.7

N/A

GS4, GS4C

2.7

11.7

N/A

GS6, GS6C

3.0

13.0

N/A

GS6/T, GS6C/T, GS6/TR,

GS6/TFR

4.0

18.0

L1 9 L2 9 L3 N/A

GS65

4.5

19.6

N/A

GS7, GS7C, GS7/R

6.0

26.0

L1 13 L2 13 L3 N/A

GS9

8.6

37.0

L1 12 L2 12 L3 13

Models of 3kW and less are supplied with a fitted plug and lead. Models over 3kW

must be installed by a qualified electrician.

OPERATING INSTRUCTIONS

Only qualified or trained personnel should use this appliance.

Before using the appliance for the first time, wipe the protective oil off the griddle

plate and wash it down with mild detergent solution.

Connect to the power supply and switch on –the green neon indicates power to the

appliance.

The temperature in each half of twin zone models may be controlled separately.

Turn the control knobs to the required setting –the amber neon illuminates.

The griddle is ready to use when the amber neon extinguishes. The amber neon

will then operate as the element cycles.

Regularly check the fat drawer. Do not let it overflow.

CLEANING

Do not use a water jet or steam cleaner, and do not immerse this appliance.

Clean outer panels with warm water and mild detergent, do not use abrasive

materials. Dry with a soft cloth.

Cleaning of griddle plates

All griddle plates may be cleaned with a proprietary food safe cleaner.

Do not use ice to clean the plates.

IS 215 ECN 3607 Page 6 of 8

Steel plates

Allow to cool. Scrape off any residue and wash down with mild detergent and

water.

Rinse to remove all traces of detergent. Once clean and dry, protect with a light

coating of cooking oil.

Chrome plates

Remove food debris during use when possible.

Allow to cool, flush with water to soften any residue.

Use a bristled brush to loosen debris, and scrape it into the fat drawer.

Repeat the flushing process, adding a little mild detergent. Rinse and wipe dry with

a soft cloth.

Do not use sharp instruments on a chrome surface.

SERVICING, MAINTENANCE AND

COMPONENT REPLACEMENT

All servicing, maintenance and component replacement on this appliance should be

carried out by one of our recommended service engineers.

Please refer to the Service Help Desk number on the final page of this manual.

Part Number

Description

Used on

CO09

Relay

GS65

CO215

Contactor

GS9

EL104

Element

GS3, GS3C, GS6/T, GS6/TR, GS6/TFR

EL105

Element

GS4, GS4C

EL106

Element

GS6, GS6C

EL107

Element

GS65

EL108

Element –3kW

GS7, GS7C, GS7/R, GS9

EL155

Element –2.8kW

GS9

FAULT FINDING

SPARE PARTS LIST

IS 215 ECN 3607 Page 7 of 8

FE37

Foot

All

KN182

Control knob

All

NE42

Amber neon

All

NE43

Green neon

All

PL201

Mains cable

GS3, GS3C

PL202

Mains cable

GS4, GS4C, GS6, GS6C

TE45

3 phase terminal

GS65, GS6/T, GS6/TR, GS6/TFR, GS7,

GS7C, GS7/R, GS9

TH107

Thermostat

All

Part Number

Description

Used on

SB3

Splash guard extension

300 wide models

SB4

450 wide models

SB6

600 wide models

SB7

750 wide models

SB9

900 wide model

ACCESSORIES

IS 215 ECN 3607 Page 8 of 8

For help with the installation, maintenance and use of your Lincat equipment,

please contact our service department:

UK: 01522 875520

For non-UK customers, please contact your local Lincat dealer

All service work, other than routine cleaning should be carried out by one of our

authorised service agents. We cannot accept responsibility for work carried out by

other persons.

To ensure your service enquiry is handled as efficiently as possible, please tell us:

Brief details of the problem

Product code

All available on serial plate

Type number

Serial number

Lincat reserve the right to carry out any work under warranty, given reasonable

access to the appliance, during normal working hours, Monday to Friday, 08:30 to

17:00.

GUARANTEE

This unit carries a comprehensive UK mainland 2 year warranty. The guarantee is

in addition to, and does not diminish your statutory or legal rights.

The guarantee does not cover:

Accidental damage, misuse or use not in accordance with the manufacturer’s

instructions

Consumable items (such as filters, glass, bulbs, slot toaster elements and door

seals.)

Damage due to incorrect installation, modification, unauthorised service work or

damage due to scale, food debris build-up, etc.

The manufacturer disclaims any liability for incidental, or consequential damages.

Attendance is based on reasonable access to the appliance to allow the authorised

technician to carry out the warranty work.

Service calls to equipment under warranty will be carried out in accordance with the

conditions of sale. Unless otherwise specified, a maximum of 15 minutes of

administrative time, not spent directly carrying out servicing work, is provided for

within the warranty. Any requirement for staff attending the call to spend greater time

than 15 minutes due to administrative requirements, such as on health and safety risk

assessments, will be chargeable at the prevailing rate.

SERVICE INFORMATION

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Plancha de Lincat

Lincat

Lincat Silverlink 600 GS6 Guía del usuario

Lincat

Lincat Opus OE7205 Instrucciones de funcionamiento

Lincat

Lincat Opus 800 OE8210 Manual del propietario

Lincat

Lincat Silverlink 600 GS3 Manual de servicio

Lincat

Lincat Opus 700 OE7205 Manual del propietario

Lincat

Lincat Lynx 400 LGR2 Guía del usuario

Lincat

Lincat OE8601 Manual del propietario

Lincat

Lincat Opus 800 Series Manual del propietario

Lincat

Lincat Silverlink 600 GS4 Manual

Lincat

Lincat Silverlink 600 Manual del propietario

Lincat

Lincat GS3 Manual de usuario

Lincat

Lincat Opus 800 OE8205 Guía del usuario

Lincat

Lincat Opus 800 OG8201 Manual del propietario

Manuales populares de Plancha de otras marcas

Proctor-Silex

Proctor-Silex 25340 Manual de usuario

New House Kitchen

New House Kitchen NH33-C Manual de usuario

Magikitch'n

Magikitch'n 24 Manual de usuario

Black Stone

Black Stone 1650 Manual de usuario

Anvil

Anvil FTA7116 Manual de usuario

Presto

Presto 07030 Manual de usuario

Pit Boss

Pit Boss PB2BGT1 Manual

Dyna-Glo

Dyna-Glo DGL260SNP Manual de usuario

Char-Broil

Char-Broil 19952085 Manual de usuario

APW Wyott

APW Wyott HMG-2424 Manual de usuario

Pit Boss

Pit Boss Ultimate Griddle PB2BGD2 Manual de usuario

Airxcel

Airxcel Suburban Elite SOP-1005A Manual de usuario

Keating Of Chicago

Keating Of Chicago MIRACLEAN PRE-2000 Manual de usuario

Nexgrill

Nexgrill 720-0786A Manual de usuario

Outwell

Outwell FH-3047C Manual de usuario

Rankam

Rankam Member's Mark GR2298901-MM-02 Guía de referencia rápida

Black Stone

Black Stone 1972 Manual de usuario

Star

Star Ultra Max 760TA Manual de usuario