2
Description:
The e-Stat is a low voltage, solid state, automatic
changeover, heating/cooling thermostat with digital
display showing setpoints and room temperature.
The e-Stat is a 2-Way Communicating, remotely
programmable thermostat.
Standard Features:
•Control of up to two stages of heating
and cooling.
•Proportional plus Integral (P+I) control for
accurate, even temperature control.
•Automatic changeover from heating to
cooling with deadband to prevent short
cycling of HVAC equipment.
•Remotely programmable, adjustable
deadband.(5 °F is default)
•Remotely configurable Y1, Y2 interstage
differential (1.5 °F is default)
•Intelligent pre-conditioning of the controlled
space prior to the start of the workday.
•Automatic randomized delay to
prevent power surges at power up (4 to 12
minutes)
•Backlit display for easy viewing in low light
conditions.
•Support for optional humidity sensing.
•Limited Lifetime Warranty.
General:
Voltage Rating (min, max).........................20 to 30 VAC
Current Draw (typ).............................285 mA @ 24VAC
A1-A2-A3 Relay Load (max)................1 Amp @ 24VAC
G, Y1, Y2, W1, W2, O/B Load (max)...1 Amp @24VAC
Network:
Cabling........................Cat5 (UTP) with RJ45 connector
Ethernet....................................10/100BT Auto-Sensing
Wiring Cable Distance (Max).................................328 ft
