Lightmybricks LEGO 1989 Batmobile Manual de usuario

The following page is the instructions for the Light My Bricks LEGO 1989

Batmobile (76139) LED light kit.

If you run into any issues, please refer to the online troubleshooting guide.

To ensure a trouble-free installation of your light kit, please read and follow

each step carefully. These instructions can be downloaded in PDF format here

Please note: This page lists instructions for the LED light kit only. If you are

wishing to purchase the Light My Bricks LEGO 1989 Batmobile (76139) LED light

kit , please click here to view the product page

LIGHT MY BRICKS: LEGO 1989 Batmobile 76139

Lighting Kit

Package Contents:

8x White 15cm Bit Lights

6x Warm White 30cm Large Bit Lights

2x Cool White 30cm Bit Lights

4x Red 30cm Bit Lights

1x Rotating White 30cm Bit Light

1x White Strip Light

1x Flicker Effects Board

1x Gun Effects Board

1x NC Push Board

1x 6-Port Expansion Board

2x 8-Port Expansion Boards

1x 12-Port Expansion Board

3x 5cm Connecting Cables

3x 15cm Connecting Cables

1x 50cm Connecting Cable

8x Adhesive Squares

1x AA Battery Pack

LEGO Pieces:

2x Black Round Plate 1×1 with open stud

Important things to note:

Laying cables in between and underneath bricks

Cables can ﬁt in between and underneath LEGO® bricks, plates, and tiles

providing they are laid correctly between the LEGO® studs. Do NOT forcefully

join LEGO® together around cables; instead ensure they are laying comfortably

in between each stud.

CAUTION: Forcing LEGO® to connect over a cable can result in damaging the

cable and light.

Connecting cable connectors to Expansion Boards

Take extra care when inserting connectors to ports of Expansion Boards.

Connectors can be inserted only one way. With the expansion board facing up,

look for the soldered “=” symbol on the left side of the port. The connector side

with the wires exposed should be facing toward the soldered “=” symbol as you

insert into the port. If a plug won’t ﬁt easily into a port connector, do not force it.

Incorrectly inserting the connector can can result in bent pins inside the port

or possible overheating of the expansion board when connected.

Connecting cable connectors to Strip Lights

Take extra care when inserting connectors to ports on the Strip Lights.

Connectors can be inserted only one way. With the Strip Light facing up, ensure

the side of the connector with the wires exposed is facing down. If a plug won’t

ﬁt easily into a port connector, don’t force it. Doing so will damage the plug and

the connector.

Connecting Micro Cable connectors to Micro

Expansion Board Ports

Take extra care when inserting the micro connectors to micro ports of Micro

Expansion Boards. Connecting Micro Bit Lights to Micro Expansion Boards is

similar to connecting lights and cables to Strip Lights. With the expansion

board facing up, ensure the side of the connector with the wires exposed is

facing down. If a plug won’t ﬁt easily into a port connector, do not force it. Use

your ﬁngernail to push the plastic part of the connector to the micro port.

Installing Bit Lights under LEGO® bricks

and plates.

When installing Bit Lights under LEGO® pieces, ensure they are placed the

correct way up (Yellow LED component exposed). You can either place them

directly on top of LEGO® studs or in between.

OK, Let’s Begin!

1.) We will ﬁrst install the headlights to the batmobile. Carefully remove the two

headlight sections, then ﬂip them over and disassemble the right headlight

section as shown below.

Take a Warm White 30cm Large Bit Light and with the LED facing the

opposite side to the sticker, place it inside the trans yellow brick. Bring the cable

down the side where the sticker is, then secure the Bit Light in place by

reconnecting the trans yellow plate over the top.

Repeat this step to install another 2x Warm White 30cm Large Bit Lights to

the other two headlight pieces, then reconnect each one to the right headlight

ensuring the LEDS are facing to the front.

2.) Bring the ends of the three bit light cables together and thread them

through the space behind the headlights. Turn the batmobile onto it’s left side

so we can access underneath. Find the three cables we threaded through

behind the headlight and pull them all the way out at the front of the wheel.

Turn the vehicle back over and reconnect the right headlight ensuring the

cables underneath are laid in between studs.

Tabla de contenidos

Otros manuales de Juguete de Lightmybricks

Lightmybricks

Lightmybricks 10262 Manual de usuario

Lightmybricks

Lightmybricks 123 Sesame Street 21324 Light Kit Manual de usuario

Lightmybricks

Lightmybricks LEGO HARRY POTTER HUNGARIAN HORNTAIL DRAGON Manual de usuario

Lightmybricks

Lightmybricks LEGO GRINGOTTS WIZARDING BANK COLLECTOR'S... Manual de usuario

Lightmybricks

Lightmybricks LEGO 40426 Manual de usuario

Lightmybricks

Lightmybricks 40410 Manual de usuario

Lightmybricks

Lightmybricks LEGO 75980 Manual de usuario

Lightmybricks

Lightmybricks LEGO FORD F-150 RAPTOR Manual de usuario

Lightmybricks

Lightmybricks LEGO Mercedes Benz Arocs 42043 Lighting Kit Manual de usuario

Lightmybricks

Lightmybricks 76240 Manual de usuario

Lightmybricks

Lightmybricks LEGO Star Wars Darth Vader Castle 75251 Lighting... Manual de usuario

Lightmybricks

Lightmybricks 10271 Manual de usuario

Lightmybricks

Lightmybricks R2-D2 LED Lighting Kit Manual de usuario

Lightmybricks

Lightmybricks LEGO 42128 Manual de usuario

Lightmybricks

Lightmybricks LEGO COLOSSEUM 10276 LIGHT KIT Manual de usuario

Lightmybricks

Lightmybricks LEGO SCOUT TROOPER HELMET 75305 LIGHT KIT Manual de usuario

Lightmybricks

Lightmybricks LEGO Hogwarts Clock Tower Manual de usuario

Lightmybricks

Lightmybricks Detective's O ce 10246 Manual de usuario

Lightmybricks

Lightmybricks 70657 Manual de usuario

Lightmybricks

Lightmybricks LEGO Star Wars Yoda 75255 Lighting Kit Manual de usuario

Lightmybricks

Lightmybricks LEGO SANTA'S VISIT 10293 Manual de usuario

Lightmybricks

Lightmybricks LEGO BOUTIQUE HOTEL Manual de usuario

Lightmybricks

Lightmybricks Light & Sound Kit for LEGO Ghostbusters Ecto-1... Manual de usuario

Lightmybricks

Lightmybricks LEGO STAR WARS EMPEROR'S THRONE ROOM Manual de usuario

Manuales populares de Juguete de otras marcas

marklin

marklin 37321 Manual de usuario

Canon

Canon PAPER CRAFT Manual de usuario

GREAT PLANES

GREAT PLANES Pitts M-12S Manual de usuario

NOCH

NOCH 14261 Manual de usuario

Hausler

Hausler 450 SE V2 Manual de usuario

Dynaflite

Dynaflite Daydream Manual de usuario

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manual

Kenner

Kenner Batman 63651 Manual de usuario

LEGO

LEGO 8527 Manual de usuario

iKarus

iKarus ECO 8 Manual de usuario

Multiplex

Multiplex EasyStar II Manual de instrucciones

Walkera

Walkera 38 Manual de instrucciones

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manual de usuario

MD

MD MXION SWD Manual de usuario

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manual de usuario

marklin

marklin 39671 Manual de usuario

Meccano

Meccano 15103 Manual de usuario

LEGO

LEGO TECHNIC 8735 Manual de usuario