Lightmybricks 71016 Manual de usuario

LightMyBricks

InstallationInstructionsforLightMyBricksLEDLightingKits

May29,2016 ·30minread

LightMyBricks:Kwik-E-MartLED

LightingKit

Here is the instruction document for the Lego Kwik-E-Mart LED lighting

kit. Please read and follow the steps carefully to ensure this lighting kit

is installed properly.

If you run into any issues, please refer to the online troubleshooting

guide.

This user guide is also available to download in PDF format here.

...

Packagecontents:

7x LED Strip Lights•

10x White 30cm Bit Lights

1x Flashing White 30cm Bit Light

3x Flashing Red 30cm Bit Lights

4x White 15cm Bit Lights

2x Flashing White 15cm Bit Lights

2x 12-port Expansion boards

1x 8-port Expansion Board

1x Flat Battery Pack (Requires 2x CR2032 batteries)

1x Battery Pack (Requires 3x AA batteries)

10x Adhesive squares

Connecting Cables

4x 15cm cables

4x 30cm cables

Extra LEGO Pieces for mounting Strip Lights, CCTV and Billboard Lights

4x Lego Plate 1x6

2x Lego Transparent Red 1x1 round plate

2x Lego Black Tile, Modied 1 x 1 with Clip

2x Lego Technic Pin with Friction Ridges Lengthwise WITH

Center Slots

2x Lego Weapon Spear Gun with Squared Trigger and Thick

Spear Base

2x Lego Technic Black 1x1 brick with hole

•

...

Importantthingstonote:

Layingcablesinbetweenandunderneathbricks

Cables can t in between and underneath LEGO® bricks, plates, and

tiles providing they are laid correctly between the LEGO® studs. Do

NOT forcefully join LEGO® together around cables; instead ensure they

are laying comfortably in between each stud.

CAUTION:ForcingLEGO®toconnectoveracable

canresultindamagingthecableandlight.

ConnectingcableconnectorstoStripLights

Take extra care when inserting connectors to ports on the Strip Lights.

Connectors can be inserted only one way. With the Strip Light facing

up, ensure the side of the connector with the wires exposed is facing

down. If a plug won’t t easily into a port connector, don’t force it.

Doing so will damage the plug and the connector.

ConnectingcableconnectorstoExpansionBoards

Take extra care when inserting connectors to ports of Expansion

Boards. Connectors can be inserted only one way. With the expansion

board facing up, look for the soldered “=” symbol on the left side of the

port. The connector side with the wires exposed should be facing

toward the soldered “=” symbol as you insert into the port. If a plug

won’t t easily into a port connector, do not force it.

WARNING:Incorrectlyinsertingtheconnectorcan

resultinbentpinsinsidetheportorpossible

overheatingoftheexpansionboardwhenconnected.

InstallingBitLightsunderLEGO®bricksandplates.

When installing Bit Lights under LEGO® pieces, ensure they are placed

the correct way up (Yellow LED component exposed). You can either

place them directly on top of LEGO® studs or in between.

...

OK, Let’s Begin!

...

Instructionsforinstallingthiskit

LightingthePoliceCar:

1.) Start by removing the following Lego pieces which make up the roof

and windscreen, followed by the black Lego plates and tiles from the

front bonnet.

2.)Disconnect from each side of the car, the black 1 x 1 brick with the

transparent yellow plate attached. Remove the yellow plate from the

black brick and take 1x White 15cm Bit Light and using the connector

end of the cable of the LED, thread this through the hole of the front of

the black brick.

Pull the cable from the back of the black brick all the way until the LED

component is at up against the other side of the brick. Ensure that the

LED component part is facing the correct way up, then secure this

down by reconnecting the transparent yellow Lego plate over the top.

Repeat this step for the other head light of the car using another White

15cm Bit Light.

3.) Reconnect the 2 head lights back to the front of the car ensuring the

cables for the lights are facing up.

4.) Next step is to remove the following Lego pieces from the car so that

we can lay the cables from the headlights underneath and all the way

to the back.

5.) Thread the 2 cables through the small holes behind the front seats,

1 cable through each hole.

6.) Start securing the cables down by reconnecting back Lego plates

and tiles over the top. Before doing so, ensure that the cables are laid in

between studs exactly the same way as the below images.

7.) Reconnect the white bricks as per below ensuring that the cables

are laid in between the black and white studs underneath.

EnsurethecablesarelaidonthesideofeachofthebrownLegostuds

We can now also reconnect the Lego pieces which make up the front of

the dash board, side mirrors, and front windscreen.

8.) In order to hide the rest of the contents from this lighting kit in the

back section of the car, we will be removing and discarding the

following pieces.

Otros manuales de Equipo de iluminación de Lightmybricks

Lightmybricks

Lightmybricks LEGO Winter Village Post Office 10222 Manual de usuario

Lightmybricks

Lightmybricks 76423 Manual de usuario

Lightmybricks

Lightmybricks LEGO CONCORDE Manual de usuario

Lightmybricks

Lightmybricks LEGO BMW M 1000 RR 42130 LIGHT KIT Manual de usuario

Lightmybricks

Lightmybricks 75329 Manual de usuario

Lightmybricks

Lightmybricks SUPER MARIO THE MIGHTY BOWSER 71411 Manual de usuario

Lightmybricks

Lightmybricks LEGO THE OFFICE 21336 LIGHT KIT Manual de usuario

Lightmybricks

Lightmybricks 75969 Manual de usuario

Lightmybricks

Lightmybricks 10265 Manual de usuario

Lightmybricks

Lightmybricks LEGO 75309 Manual de usuario

Lightmybricks

Lightmybricks Old Fishing Store Lighting Kit 103041 Manual de usuario

Lightmybricks

Lightmybricks 103375 Manual de usuario

Lightmybricks

Lightmybricks LEGO BMW M 1000 RR 42130 Manual de usuario

Lightmybricks

Lightmybricks 75330 Manual de usuario

Lightmybricks

Lightmybricks LEGO ORCHID Manual de usuario

Lightmybricks

Lightmybricks 10299 Manual de usuario

Lightmybricks

Lightmybricks LEGO NASA Apollo Saturn V 21309 Lighting Kit Manual de usuario

Lightmybricks

Lightmybricks 21058 Manual de usuario

Lightmybricks

Lightmybricks LEGO ELF CLUB HOUSE 10275 LIGHT KIT Manual de usuario

Lightmybricks

Lightmybricks Light Kit for LEGO Star Wars The Razor Crest... Manual de usuario

Lightmybricks

Lightmybricks LEGO AT-TE WALKER 75337 LIGHT KIT Manual de usuario

Lightmybricks

Lightmybricks LEGO VENETIAN HOUSES 910023 Manual de usuario

Lightmybricks

Lightmybricks LEGO THE LORD OF THE RINGS: RIVENDELL 10316 LIGHT... Manual de usuario

Lightmybricks

Lightmybricks 21057 Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario