Lightmybricks 75252 Manual de usuario

Please note: This page lists instructions for the LED light kit only.

Package Contents:

34x Cool White 30cm Bit Lights

3x Flashing White 30cm Bit Light

4x Flashing Red 30cm Bit Light

5x Cool White 30cm Large Bit Lights

20x Green 15cm Micro Bit Lights

11x White 30cm Micro Bit Lights

Effects and Expansion Boards

1x Pulse Effects Board

1x Gun Effects Board

1x Multi Effects Board

1x Flicker Effects Board

7x Micro 4-Port Expansion Boards

1x Micro 8-Port Expansion Boards

1x 2-Port Expansion Board

6x 6-Port Expansion Boards

1x 8-Port Expansion Boards

3x 12-Port Expansion Boards

Connecting Cables:

9x 5cm Connecting Cables

6x 15cm Connecting Cables

5x 30cm Connecting Cables

2x 50cm Connecting Cable 1x USB

Power Cable

LEGO Pieces:

28x Trans Clear Round Plate 1×1

4x Trans Light Blue Round Plate 1×1

1x Trans Clear Tile 1×2

1x Trans Black Cone 1×1 with Top Groove

1x Trans Clear Slope 30 1x1x2/3

Important things to note:

Laying cables in between and underneath bricks

Cables can fit in between and underneath LEGO® bricks, plates, and tiles providing they are laid

correctly between the LEGO® studs. Do NOT forcefully join LEGO® together around cables;

instead ensure they are laying comfortably in between each stud.

CAUTION: Forcing LEGO® to connect over a cable can result in damaging the cable and light.

Connecting cable connectors to Expansion Boards

Take extra care when inserting connectors to ports of Expansion Boards. Connectors can be

inserted only one way. With the expansion board facing up, look for the soldered “=” symbol on

the left side of the port. The connector side with the wires exposed should be facing toward the

soldered “=” symbol as you insert into the port. If a plug won’t fit easily into a port connector, do

not force it.

Incorrectly inserting the connector can can result in bent pins inside the port or possible

overheating of the expansion board when connected.

Connecting cable connectors to Strip Lights

Take extra care when inserting connectors to ports on the Strip Lights.

Connectors can be inserted only one way. With the Strip Light facing up, ensure the side of the

connector with the wires exposed is facing down. If a plug won’t fit easily into a port connector,

don’t force it. Doing so will damage the plug and the connector.

Connecting Micro Cable connectors to Micro Expansion Board

Ports

Take extra care when inserting the micro connectors to micro ports of Micro Expansion Boards.

Connecting Micro Bit Lights to Micro Expansion Boards is similar to connecting lights and cables

to Strip Lights. With the expansion board facing up, ensure the side of the connector with the

wires exposed is facing down. If a plug won’t fit easily into a port connector, do not force it. Use

your fingernail to push the plastic part of the connector to the micro port.

Installing Bit Lights under LEGO® bricks and plates.

When installing Bit Lights under LEGO® pieces, ensure they are placed the correct way up (Yellow

LED component exposed). You can either place them directly on top of LEGO® studs or in

between.

OK, Let’s Begin!

1.) Start by disconnecting the following sections from the top of the ship.

Use your LEGO removal tool to disconnect the following pieces to allow us to remove the

two panels that make up the entire left section of the ship.

Tabla de contenidos

Otros manuales de Equipo de iluminación de Lightmybricks

Lightmybricks

Lightmybricks LEGO Porsche 911 RSR 42096 Lighting Kit Manual de usuario

Lightmybricks

Lightmybricks LEGO NATURAL HISTORY MUSEUM Manual de usuario

Lightmybricks

Lightmybricks LEGO MINI DISNEY THE HAUNTED MANSION 40521 LIGHT... Manual de usuario

Lightmybricks

Lightmybricks LEGO MARVEL SPIDER-MAN CARNAGE Manual de usuario

Lightmybricks

Lightmybricks LEGO WINTER HOLIDAY TRAIN 10254 Manual de usuario

Lightmybricks

Lightmybricks 76989 Manual de usuario

Lightmybricks

Lightmybricks LEGO IMPERIAL LIGHT CRUISER 75315 LIGHT KIT Manual de usuario

Lightmybricks

Lightmybricks LEGO UCS RAZOR CREST Manual de usuario

Lightmybricks

Lightmybricks 21058 Manual de usuario

Lightmybricks

Lightmybricks Light Kit for LEGO Star Wars The Razor Crest... Manual de usuario

Lightmybricks

Lightmybricks LEGO JAZZ QUARTET 21344 Manual de usuario

Lightmybricks

Lightmybricks Old Fishing Store Lighting Kit 103041 Manual de usuario

Lightmybricks

Lightmybricks Fire Brigade Manual de usuario

Lightmybricks

Lightmybricks LEGO CONCORDE Manual de usuario

Lightmybricks

Lightmybricks 75968 Manual de usuario

Lightmybricks

Lightmybricks 10309 Manual de usuario

Lightmybricks

Lightmybricks LEGO MEDIEVAL CASTLE Manual de usuario

Lightmybricks

Lightmybricks 76209 Manual de usuario

Lightmybricks

Lightmybricks LEGO BUGATTI CHIRON 2.0 Manual de usuario

Lightmybricks

Lightmybricks 10265 Manual de usuario

Lightmybricks

Lightmybricks LEGO THE LORD OF THE RINGS: RIVENDELL 10316 LIGHT... Manual de usuario

Lightmybricks

Lightmybricks 21333 Manual de usuario

Lightmybricks

Lightmybricks Technic DIY Designer Kit Manual de usuario

Lightmybricks

Lightmybricks 71016 Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario