LG V-UP851NB Manual de usuario

Model

Language

Page

Material Size(W*H)

Designer

Designer Confirm

Color(cover/body)

Part No. Description

Date

No. Date

Chage Record

Change content ECO No.

Weight 100g

2006.11.09

V-UP861NB,CVUQDAG. V-UP861NB,CIRQSBI

ENGLISH+HEBREW

38288I2002D

1/1

215*260(mm)

Li Juan

Owners Manual

drawing actualization

add more applied model ACTU700016 07-01-03 Ma.W.J C.Y.T

06-11-09 Ma.W.J C.Y.TACTU606569

Upright Vacuum Cleaner

Owner’s Manual

Review this manual

before operating

the cleaner.

P/No.:38288I2002D

MODEL: V-UP851NB/NBT

V-UP861NB/NBT

Contents

Assembling Cleaner ...................................3

Carton Contents .........................................3

Cleaner Descriptions ..................................4

How To Use.............................................4-6

Cleaning Tools .........................................6

If You Have a Problem..............................11

Important Safeguards.................................2

Lubrication..................................................9

Maintenance ..........................................6-11

Cleaning Filters.....................................7-8

Clearing Blockages ................................12

Emptying Dirt Cup.................................6-7

Replacing Agitator Brush Roll ..................9

Replacing Belt.......................................8-9

Replacing Powered Hand Tool

Agitator Brush Roll .................................10

Replacing Power Hand Tool Belt ...........10

Thermal Protector .....................................11

Important Safeguards!

when using an electrical appliance, always follow basic precautions, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

WARNING: To reduce the risk of fire, electric shock, or injury:

Do not use outdoors or on wet surfaces.

This appliance is not intended for use by young children or infirm person unless they have

been adequately supervised by a responsible person to ensure that they can use the

appliance safely.

Young children should be supervised to ensure that they do not play with the appliance.

If the supply cord is damaged, it must be replaced by the manufacturer its service agent

or similar qualified persons in order to avoid a hazard.

Keep hair, loose clothing, fingers, feet and all parts of body away from openings, rotating

agitator and other moving parts. Do not operate cleaner in bare feet or when wearing

open toe shoes or sandals.

Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot

ashes.

Do not use to pick up flammable or combustible materials such as gasoline or fine wood

sandings or use in areas where they may be present.

Avoid picking up hard, sharp objects with the cleaner. They may damage the cleaner.

Always turn off this appliance before connecting or disconnecting hose.

Unplug cleaner before connecting the powered hand tool.

Do not use without dirt cup or filters in place. Empty cup and clean filters frequently when

picking up very fine materials such as powder.

Use extra care when cleaning on stairs.

Do not put any object into openings. Do not use with any opening blocked; keep free of

dust, lint, hair, or anything that may reduce air flow.

Do not pull or carry or use cord. as a handle, close door on cord or pull cord around sharp

edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.

Always disconnect cord from electrical outlet before servicing the cleaner.

Unplug cleaner when not in use. Turn off all controls before unplugging.

Do not unplug by pulling on cord. To unplug, grasp the blug, not the cord. Never handle

plug or appliance with wet hands.

Hold onto the plug while cord is being rewound to prevent cord from whipping.

The use of an extension cord is not recommended.

Do not use with damaged cord or plug.

Use vacuum cleaner only for its intended use as described in the instructions.

Save these instructions!

1. Assembling cleaner

Carton contents

1-1

1-2

A. Handle section and screwn

(taped to handle)

B. Cleaner body

C. Cleaning tools

D. Hose

Remove all parts from carton and identify

each item shown.

Make sure all parts are located before

disposing of pacing materials.

A1-3 1-4

Attah handle

Slide handle section (A) onto back of

handle.

Push screw into hole on back of

handle. Tighten screw securely with a

Phillips screwdriver.

Position tools

The holder (B) for the powered hand

tool snaps onto the tabs on the front

of the handle. Be sure the holder is

properly positioned as shown in the

drawing.

Place the powered hand tool (C) into

the holder as shown.

Place combination tool (D) into

opening on back of handle.

The crevice wand (E) slides over the

post (F) on the back of the cleaner.

Position hose

Align end of hose with projections

over slots in dirt duct on back of

cleaner. Twist to lock in place.

The hose connector allows the hose

to swivel.

1-5 1-6 1-7

2. How to use

Wrap hose over hook (G).

Push hose end (H) firmly onto tube

(I) as shown.

1. Handle grip

2. Powered hand tool

3. Dirt cup release button

4. Carrying handle/Dirt cup

handle

5. Air flow indicator

6. Dirt cup assembly

7. Long lasting HEPA filter

8. Body cover

9. Nozzle control knob:

turn knob to correct setting

for height of carpet being

cleaned.

10. Furniture nozzle: helps

prevent cleaner from mark-

ing furniture.

11. Cord reel

12. Cord rewind button:

press button to rewind

cord for storage. Hold

plug until cord is

rewound.

13. Cord hook

14. Hose

15. Hose holder

16. Combination tool

17. Crevice wand

18. Hose handle

19. ON/OFF pedal

20. Handle release pedal:

step on pedal to lower

handle to operating or

low positions.

Operate cleaner only at

voltage specified on data

plate on back of cleaner.

This cleaner is intended

for household use.

Polarized plug

To reduce the risk of electric shock,

this appliance has a polarized plug

(one blade is wider than the other).

This plug will fit in a polarized outlet

only one way. If the plug does not fit

fully in the outlet, reverse the plug. If

it still does not fit, contact a qualified

electrician to install the proper outlet.

Do not change the plug in any way. ON-OFF pedal

Grasp end of plug (A) and pull to desired

cord length. Plug cord into electrical

outlet.

To turn cleaner ON, step on ON/OFF

pedal (B) once.

To turn cleaner OFF, step on pedal

again.

Cord rewind

Grasp the end of the plug and pull to release

cord from cord reel. After desired cord length

is reached, the cord will lock into position.

To return cord for storage, hold plug

and press on button (C) at top of

cord reel. To prevent cord from

whipping, hold plug until cord is

rewound.

1-8

Cleaner description

2-1

2-2

2-3

2-4 2-5 2-6

Transporting cleaner

To move your cleaner from room to

room, put handle in upright position,

tilt cleaner back on rear wheels and

push forward.

Carrying cleaner

The cleaner can also be moved by

using the carrying handle, located

on the top of the dirt cup.

Handle positions

The handle of your cleaner has

three positions; upright for storage

and when using cleaning tools;

operating position for general

operation on carpet and floors; low

for reaching under low furniture.

Step on handle release pedal to

lower handle.

2-7

2-10

2-8 2-9

Carpet height

adjustment

The cleaning of carpet and rugs

takes place at the nozzle (A).

When it is necessary to raise and

lower the nozzle for various carpet

pile heights, place handle in upright

position and turn the nozzle control

knob (B) to the desired setting.

The nozzle will not move into the

adjusted position until the cleaner

handle is lowered to the operating

position.

Settings

For maximum cleaning perfor-

mance, the following carpet height

settings are recommended:

• Lowest setting: for all types of

carpet and hard surface flooring.

Note: If the cleaner is difficult to

push, turn knob to the next higher

setting.

• Higher settings: for very deep

pile carpet, where easier pushing

effort is desired, while maintaining

good cleaning performance.

Cleaning lightweight

flexible rugs

Stand on one end of rug and move

cleaner toward other end or edge.

Before reaching edge, push down

on handle. This will lift up the nozzle

(front of cleaner) as shown and will

prevent rug from clinging to cleaner.

Continue to lift up nozzle so that

when you have reached the edge, it

is completely off the rug. Move

cleaner back to start again, lower

nozzle, and use only forward

strokes.

Stair cleaning

Use the hose and power hand tool

for stair cleaning. Clean from bottom

to top.

When using cleaning tools, the

agitator will continue to rotate.

CAUTION: To avoid personal

injury or unnecessary wear to

carpet, and to prevent the cleaner

from falling, always place it at

bottom of stairs.

2-122-11

Cleaning tools

Tools allow for cleaning surfaces

above the floor and for reaching

hard to clean areas.

The cleaner is ready for tool use

when handle is in upright position.

CAUTION: The agitator continues

to rotate while cleaner handle is

in upright position. Avoid tipping

cleaner or setting it on furniture,

fringed area rugs or carpeted

stairs during tool use.

How to clean tools

To clean the hose and powered

hand tool, wipe off dirt with a cloth

dampened in a mild detergent.

Rinse with a damp cloth. DO NOT

submerge powered hand tool in

water.

Cleaning tools may be washed in

warm water with a detergent. Rinse

and air dry before using.

Select proper tool

C. Combination tool use with brush

attached for carved furniture, table

tops, books, lamps, lighting fixtures,

venetian blinds, baseboards, shutters,

and registers.

Remove brush to clean upholstered

furniture, draperies, mattresses,

clothing, and carpeted stairs.

D. Powered hand tool may be

used for upholstered furniture,

draperies, mattresses, clothing,

automobile interiors, and carpeted

stairs.

E. Crevice wand may be used in

tight spaces, corners and along

edges in such places as dresser

drawers, upholstered furniture,

stairs and baseboards. It can also

be used for extra reach with the

dusting brush.

2-13

Attach wand and tools

Attach tool to the hose (F) by pushing

it firmly onto hose.

Twist wand or tool slightly to tighten

or loosen the connection.

2-14

3-1

Combination tool

Slide brush to remove.

To replace brushes, align brush with

grooves on tool. Slide brush into

place.

3. Maintenance

Familiarize yourself with these home

maintenance tasks as proper use

and care of your cleaner will ensure

continued cleaning effectiveness.

Air flow indicator

The indicator (A) will show yellow when

the dirt cup is full or there is a block-

age or clog in the system. Turn

cleaner OFF and unplug. Check

the dirt cup and empty if necessary.

Turn cleaner back on. If the indicator

still shows yellow, follow the instruc-

tions under “Clearing blockages”.

Removing hose

When using cleaning tools, cleaner

handle should be in the upright

position. Also, turn cleaner OFF

before disconnecting and connecting

hose to hose tube (A).

To use hose, lift hose end (B) as

shown.

When you are finished cleaning with

the tools, reposition hose end onto

tube.

3-2

3-5

3-8

3-9

3-10

3-6

Dirt cup

When to empty

It is recommended that the dirt cup

be emptied before the dirt reaches

the fill line (A), or after every use if

preferred.

CAUTION: Very fine materials,

such as face powder or cornstarch,

may seal the filter and cause loss

of suction. When using the cleaner

for this type of dust, empty the cup

and clean the filters often.

3-3 3-4

How to empty

Disconnect cleaner from electrical

outlet. Do not use the cleaner

without dirt cup or filters in place.

Press dirt cup release button (B) and

pivot cup out.

Cleaning filters Lifetime

HEPA filter

If you wish to clean this filter, it may

be removed and cleaned.

Place bottom of dirt cup in first.

Pivot cup into cleaner body.

Press dirt cup firmly until you hear a

click to ensure that it is locked in place.

Press on the tab (A) located on the

side of the filter cover to remove.

Dirt cup filter assembly

How to clean

Disconnect cleaner from electrical

outlet. Do not use cleaner without

dirt cup or filters in place.

Align tab (C) on filter cover with slot

(D). Press cover closed until you

hear a snap.

Holding dirt cup over trash recep-

tacle, press dirt cup door release

rod (C) on back of dirt cup to open

dirt cup door (D).

Empty dirt cup.

Close and snap dirt cup door shut.

3-7

Remove the HEPA filter (B) and

brush with the combination tool to

clean or tap side of filter against a

trash receptacle. Return the HEPA

filter into the filter cavity.

Dirt and debris can then be cleaned

from the filter cartridge by brushing

with the cleaner’s combination tool.

Remove dirt cup as described in

Fig. 3-3.

Twist dirt cup lid (A) counterclockwise

until arrows on lid and dirt cup

align. Remove lid with filter cartridge

from dirt cup.

2-12

3-11 3-12 3-13

Twist the filter cartridge counter-

clockwise, aligning arrows on lid and

cartridge. Remove pleated filter from

inside cartridge.

Belt replacement

The belt on your vacuum cleaner

causes the agitator to rotate and is

important for the effective operation of

the cleaner. The belt is located under

the bottom plate of the cleaner and

should be checked from time to time to

be sure it is in good condition.

When to replace

Disconnect cleaner from electrical

outlet.

To check belt, remove bottm plate as

shown in Fig. 3-14. Replace belt if it is

stretched, cut or broken.

Tap filter against side of trash container

to remove dirt or brush with the

cleaner’s combination tool.

Return pleated filter to inside the filter

cartridge.

3-14

How to replace

Disconnect cleaner from electrical

outlet.

Removing bottom plate.

Place handle in lowest position and

turn cleaner over so bottom side is up.

Remove the 5 screws as shown with a

Phillips screwdriver.Lift off bottom

plate (A).

3-15

Removing belt

Remove agitator brush roll (B) and

used belt (C).

Discard used belt.

Replace the filter assembly in the dirt

cup lid, aligning arrows and twisting

clockwise to lock into position.

Replace dirt cup lid onto dirt cup by

aligning arrows on lid and dirt cup and

twisting clockwise.

Replace dirt cup as described in

Fig.3-5.

3-16

Installing new belt

With lettering on outside of belt, and

positioned as shown, slide new belt

over motor pulley (D).

3-19

Replacing bottom plate

Reposition bottom plate and 5 Phillips

head screws. Tighten screws securely.

Lubrication

The motor is equipped with bearings

that contain sufficient lubrication for

the life of the motor. The addition of

lubricant could cause damage.

Therefore, do not add lubricant to

motor bearings.

Thermal protector

An internal thermal protector has been

designed into your cleaner to protect it

from overheating.

When the thermal protector acti-

vates, the cleaner will stop running.

If this happens, proceed as follows:

1. Turn the cleaner OFF and dis-

connect it from the electrical out-

let.

2. Check filters for dirt accumulation.

3. Refer to “Clearing blockages”

section.

4. When cleaner is unplugged and

the motor cools for 30 minutes,

the thermal protector automatically

resets and cleaning may continue.

If the thermal protector continues to

activate after following the above

steps, your cleaner may need

servicing.

3-17

Replacing agitator brush roll

Insert agitator through belt and place

belt in belt guide (E) on agitator.

Should the agitator shield (F) become

dislodged while replacing the belt or

the agitator, reposition it as shown

noting the placement of its belt guide

(G).

3-20

The agitator brush roll

When to replace

When agitator brushes are worn, the

agitator should be replaced.

To check condition of brushes, dis-

connect cleaner from electrical

outlet.

Disconnect cleaner from electrical

outlet.

Remove bottom plate, belt and agi-

tator following directions in “The belt”

section beginning with Fig 3-14.

Discard old agitator.

Continue following the directions in

“The belt” section to reposition belt,

new agitator and bottom plate.

Move edge of a card across bottom

plate while turning agitator. To maintain

cleaning effectiveness, replace agitator

if brushes do not touch card.

3-18

Securing agitator

Grasp agitator firmly and fit it into

position by first sliding end opposite the

belt into the rectangular slot (H) on side

of cleaner.

Pull other side of agitator (I) into place.

Turn agitator making sure belt turns

freely and is not pinched between

agitator and bottom of cleaner.

GEFI

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Aspiradora de LG

LG KOMPRESSOR Follow ME VK88501HF Manual de usuario

LG VN-20200CBK Manual de usuario

LG VC391 H Series Manual de usuario

LG VB-20420HBK Manual de usuario

LG VC5404PF Manual de usuario

LG VR594 L Series Manual de usuario

LG VK9830UHA Manual de usuario

LG VWP2 18NT Series Manual de usuario

LG V-CQ3 H Series Manual de usuario

LG VC54 Series Manual de usuario

LG V-CD201H Series Manual de usuario

LG VC2013P Manual de usuario

LG VK9820SCAY Manual de usuario

LG VB98 H Series Manual de usuario

LG CordZero A9 Manual de usuario

LG VR657 Series Manual de usuario

LG VC74070NCAQ Manual de usuario

LG V-KC902HTY Guía de instalación

LG VR62 Series Manual de usuario

LG VC4916 Series Manual de usuario

LG VK7314 Manual de usuario

LG V-CA251NT series Manual de usuario

LG NILE VC6816NRTQ.CBLQLAG Manual de usuario

LG VB7820CEU Manual de usuario

Manuales populares de Aspiradora de otras marcas

Bissell

Bissell LittleGreen Proheat 1425 Series Manual de usuario

Panasonic

Panasonic MC-YL637S147-AE Manual de usuario

NEFF

NEFF N17XH10 0 Series Manual de usuario

Oreck

Oreck Cordless Captura BK51700 Series Manual de usuario

Kogan

Kogan KAVACROBVWA Manual de usuario

Kränzle

Kränzle VENTOS 50 ID Guía del usuario

EVVO

EVVO Ai35 Manual de usuario

DeWalt

DeWalt DWH200D Manual de usuario

Pontec

Pontec Pondomatic Vacuum Cleaner Manual de usuario

Cleanmaxx

Cleanmaxx PC-P007E Manual de usuario

Exido

Exido 240-114 Manual de usuario

RIDGID

RIDGID WD1685AU0 Manual de usuario

Ezviz

Ezviz RE4P Manual de usuario

STG global

STG global TANVAC HDV3000 Manual de usuario

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manual de usuario

Factory

Factory M3340 Manual de usuario

Shop-Vac

Shop-Vac VN92 SERIES Manual de usuario

Nobles

Nobles 608669 Manual del producto