LG ST-1630F Manual de usuario

Tabla de contenidos

Manuales populares de Rack y soporte de otras marcas

Salamander

Salamander Acadia AC/W/L400/WH Manual de usuario

Fohhn

Fohhn VAT-09 Guía del usuario

ricoo

ricoo FS0522 Manual de usuario

AMSOIL

AMSOIL BMK-22 Guía rápida

Kargo Master

Kargo Master 48220 Manual de usuario

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manual de usuario

ricoo

ricoo S1222 Manual de usuario

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manual de usuario

VidaBox

VidaBox VB MNT FFS2 Manual de usuario

Welch Allyn

Welch Allyn 48960 Manual de usuario

Arkon

Arkon CM035-ST-2 Manual de usuario

PROEL

PROEL PLWIN60C Manual de usuario

Agilent Technologies

Agilent Technologies E2609B Manual de usuario

Mustang

Mustang MV-ARM4 Manual de usuario

Mounting Solutions

Mounting Solutions WRM-320 Manual de usuario

Pyle

Pyle PMKSPAD1 Manual de usuario

ShelterIt

ShelterIt 21208 Manual de usuario

SPL

SPL RackPack?4 1040 Manual de usuario

OWNER’S MANUAL

Stand For LGLEDScreen

Please read this manual carefully before install & operating your set and retain it for future

reference.

ST-1630F Stand Installation

www.lg.com

Copyright © 2022 LG Electronics Inc. All Rights Reserved

1

Technical Data

Model name

ST-1630F

Material

Aluminum Profile,Steel

Surface Finish

Power Coating (Matte Black)

Recommended Screen Size

163’’

Allowable Loads

300kg (Maximum)

Lift Range

0/200/400mm

Certification

CB,CE-LVD,ETL,RoHS2.0

Stand Dimension (W x D x H)

3097 x 1420 x 2200mm

3097 x 1420 x 2400mm

3097 x 1420 x 2600mm

Stand Base Dimension (W x D x H)

2007 x 1420 x 63mm

Caster Wheel Size (Diameter)

63mm

Wooden Case Dimension (W x D x H)

2088 x 1536 x 620 mm

Weight (Net/Gross)

150kg/230kg

This model (ST-1630F) is a stand for the LAEC018-GN2 AIO model only.

The stand has 3 levels to change the height of the screen and comes assembled as LEVEL 1.

The height can be changed if needed, and it is described on the page of 4.

The distance from the floor to the bottom of the screen is shown in the table.

Determine the height of your SCREEN and proceed first if you need to change the height of

the STAND.

Level

Height

Level 1

≈32cm

Level 2

≈52cm

Level 3

≈72cm

< Height: Level 1 >

< Height: Level 2 >

< Height: Level 3 >

2

Packing List

Item

Description

Photo

Qty.

1

Stand Base

1

2

Right Vertical Support Column

1

3

Left Vertical Support Column

1

4

Mounting Frame Horizontal Left

2

5

Mounting Frame Horizontal Right

2

6

Mounting Frame Horizontal

Reinforcing Rib

2

7

Mounting Frame Horizontal

Support Part

1

8

Mounting Frame Left Part

1

9

Mounting Frame Right Part

1

10

Mounting Frame Middle Left

1

11

Mounting Frame Middle Right

1

12

Screw M8X20mm

30

3

13

Screw M4X15mm

48

14

Screw M6X20mm

76

15

8mm Hex Key

1

16

Anti-Static Gloves

4

17

Screwdriver

1

4

Adjust the stand height (item 2& item 3)

Step1. Loosen the screw as the following position.

Step2. Fixing the screw as following position is Level 2 and Level 3

< Front View >

< Rear View >

< Front View >

< Rear View >

: The position is for Level 3

: The position is for Level 2

5

Step3. Follow the steps below(from page 6) to connect the plate

< Level 1 >

< Level 2 >

< Level 3 >

6

Assemble the stand

Step1. Install the main body (Vertical Support Column) to the stand base.

Note: The front of the vertical support column is where the tapped holes for the screws

are visible.

Use 30pcs M8X20 screws (Item 12) to install the Item 2 and Item 3

on the stand base (Item 1).

7

Step2. Connect the panel mounting plate.

< Side View >

Step3. Make one more in the same way as step 2.

Step4. Install the panel mounting plate to Vertical Support Column.

Use 24pcs M4X15 screws (Item 13) to connect Item 6

to the Item 4 and Item 5.

Use 36pcs M6X20 (Item 14) hexagon socket head cap screws to install Item 7

and assembly parts in step 2 onto Item 2 and Item 3.

< Front View >

8

Step5. Install the panel mounting plate to the main body mounting bracket.

Use 40pcs M6X20 (Item14) hexagon socket head cap screws to install

Item10, Item11, Item8 and Item9 to the main body mounting bracket.

9

Hex screw + Mounting lock

< Rear View >

Screen assembly

The 12 PCS fixed screw behind the cabinet are assembled to the cabinet and locked with

tools.

< Right Cabinet >

< Middle Cabinet >

< Left Cabinet >

Note: Please follow the order of the arrows to install the screen.