LG TONE-FP6 Manual de usuario
TONE-FP6 / TONE-FP6W
OWNER’S MANUAL
Bluetooth®LG Stereo Headset
English
Français
Deutsch
EspañolItaliano
Nederlands
Polski
Google Play App Store
Rev 2.0 EUF
www.lg.com
LG Electronics Inc. Single point of contact (EU/UK) :
Krijgsman 1, 1186 DM Amstelveen, The Netherlands
Using LG TONE Free™
Utilisation du LG TONE Free™
LG TONE Free™ verwenden
Utilizzo di LG TONE Free™
LG TONE Free™ gebruiken
Używanie LG TONE Free™
Uso de LG TONE Free™
ENGLISH
Using LG TONE Free™
1
Copyright © 2021 LG Electronics Inc. All Rights Reserved
NOTE: For the best performance and to prevent any damage to, or
misuse of the headset, please read all of the information carefully prior
to using the headset.
Any modications or changes to this manual due to typographical errors
or inaccuracies of stated information shall only be made by
LG Electronics Inc.
The LG TONE Free (TONE-FP6) is a lightweight wireless headset that uses
Bluetooth technology.
This product can be used as an audio accessory for devices supporting
either the A2DP or Hands-Free Bluetooth Prole.
Safety Precautions
The following safety precautions are provided to prevent any unexpected
accident or damage. Please familiarise yourself with the safety precautions.
The safety precautions are classied into “WARNING” and “CAUTION”.
!
WARNING: Failing to comply with the instructions may result in
serious injury or death.
!
CAUTION: Failing to comply with the instructions may result in minor
injury or product damage.
2
!
WARNING
Do not drop the product from a high place.
Make sure there is no water, alcohol, or benzene in contact with the
product.
Do not store the product in a wet or dusty place.
Do not place heavy objects on the product.
This product is waterproof to the IPX4 level (daily life waterproof).
(The IPX4 waterproof rating applies to the earbud product only.)
Do not put the product under the water or use it in a humid location
such as a bathroom.
!CAUTION
Do not disassemble, adjust, or repair the product arbitrarily.
Do not place the product near excessive heat or ammable material.
The product may be damaged if an incompatible charger is used.
Make sure that an infant or child does not swallow a magnet or a small
component of the product.
Make sure that foreign objects do not enter the charger’s connectors
(charging port and power plug). Failure to do so may result in re or
electric shock.
If you have a medical device implanted, contact your doctor before
using this device.
This product has a built-in battery, and the battery cannot be removed
or replaced arbitrarily.
3
For your safety, do not remove the battery incorporated in the product.
If you arbitrarily replace the battery or don’t replace it correctly, it may
explode.
The lithium-ion battery is a hazardous component that can cause injury.
Battery replacement by an unqualied professional can cause damage
to your device.
Do not replace the battery by yourself. The battery can be damaged,
which can cause overheat and injury. The battery must be replaced by
authorised service provider. The battery should be recycled or disposed
separately from household wastes.
Do not discard the battery arbitrarily. Follow the local procedure for
discarding batteries.
In order to prevent unnecessary energy consumption, disconnect the
device when fully charged. Always use an easily accessible power outlet
for charging your device.
Risk of re or explosion if the battery is replaced by an incorrect type.
Do not store or transport at pressures lower than 11.6 kPa and at
above 15000 m altitude.
Replacement of a battery with an incorrect type that can defeat a
safeguard (for example, in the case of some lithium battery types).
Disposal of a battery into re or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding
environment that can result in an explosion or the leakage of ammable
liquid or gas.
4
A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of ammable liquid or gas.
Do not carelessly throw away old batteries. It can cause an explosion or
re. The disposal method may vary by country and region. Dispose of it
in an appropriate manner.
NOTE
If the product is exposed to excessive sweat, clean the product.
Keep the earbuds clean.
Wearing earbuds for a long time may cause pain, and if humidity inside
ears continues for a long time, it may cause skin trouble.
HD Speaker
If the communication network of the device you are connecting to
supports HD Voice Calling, you can enjoy making voice calls and
listening to music in high denition.
5
Product Components
LG TONE Free™
Earbuds (medium eargels
installed)
UV Charging Case
Extra Ear Gels
(small & large) USB Type C™
Charging Cable
Reference guide Simple Owner's Manual WEEE Card
(Europe Only)
NOTE: Actual product design may differ from images shown in manual.
Make sure authentic LG Electronics components are used. Using a
non-authentic component may damage the product and thus void the
warranty.
Use the USB Type C™ cable provided with the product.
!
CAUTION
6
Overview
Charging Case
Earbuds
*Make sure that the charging terminal is not soiled with foreign substance.
Charging port
Charging terminals
UVnano LED
UVnano LED
Battery Status Indicator (up)
UVnano Indicator (down)
Mood light
(When you open the
charging case, the mood
light turns on and off.)
Microphone
Microphone
TouchpadTouchpad Charging terminalsCharging terminals
Speaker mesh
(Microphone)
Speaker mesh
(Microphone)
7
*The appearance and specications of the actual product may differ
depending on the model.
Pairing and Connecting
Fast Pair
-(
-(
#MVFUPPUI 0/
~1m
1 Turn on the Bluetooth function on the mobile phone or the device to
be connected.
2 Open the cover of the charging case with the earbuds mounted on the
case. Press and hold the touchpad of the left or right earbud for 3 to 5
seconds until the battery status indicator blinks in blue.
-(
-(
-(
-(50/&'1
-(
-(50/&'1
#MVFUPPUI
8
3 When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires conguring Bluetooth and location information
settings of the mobile device.)
4 If the pop-up does not appear, select [LG-TONE-FP6] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS
or Android 5.0 or lower versions).
!
CAUTION: In the list of Bluetooth connected devices,
LG-TONE-FP6_LE is not the correct model name for connection.
Check the model name in use and connect with the model name
without “LE”.
If the earbud model name is abnormally displayed on the Android
device, change the model name in the Bluetooth menu of
Connected Device Settings.
NOTE: To connect with another device, perform the above procedure
again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of
the charging case. If you close the cover of the charging case with both
earbuds mounted in the charging case, the earbuds are disconnected.
Otros manuales para TONE-FP6
1
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Auriculares de LG
LG
LG Tone Free HBS-FL7 Manual de usuario
LG
LG TONE Free TONE-UFP9 Manual de usuario
LG
LG HBM-550 Manual de usuario
LG
LG TONE Free fit Manual de usuario
LG
LG TONE Free HBS-FN4 Manual de usuario
LG
LG HBM-760 Manual de usuario
LG
LG TONE-UT90Q Manual de usuario
LG
LG HBM-260 Manual de usuario
LG
LG TONE Free fit Manual de usuario
LG
LG HBM-586 Manual de usuario
LG
LG Tone Active+ HBS-A100 Manual de usuario
LG
LG TONE Active HBS-850 Manual de usuario
LG
LG HBS-730 Manual de usuario
LG
LG 285 Manual de usuario
LG
LG FORCE HBS-S80 Manual de usuario
LG
LG FORCE HBS-S80 Manual de usuario
LG
LG Tone Infinim HBS900 Manual de usuario
LG
LG TONE-FP6 Manual de usuario
LG
LG TONE Free fit TONE-UTF8Q Manual de usuario
LG
LG TONE PLATINUM HBS-1100 Manual de usuario
