LG ToneFree Manual de usuario
ENGLISH
Simple Owner’s Manual
Bluetooth
® LG Stereo Headset
NOTE: For the best performance and to prevent any damage
to, or misuse of the headset, please read all of the information
carefully prior to using the headset.
Any modifications or changes to this manual due to typographical
errors or inaccuracies of stated information shall only be made by
LG Electronics Inc.
Rev 1.0
GBR
TONE-UT90Q
www.lg.com
Copyright © 2022 LG Electronics Inc. All Rights Reserved.
ENGLISH
2
Product Components
LG TONE Free®
Earbuds (medium eargels
installed)
UV Charging Case
Extra Ear Gels
(small & large)
USB-C™ to AUX cable
(LC0065/LC0067)
Simple Owner’s Manual
USB Type-C™
Charging and
Data cable
(LC0064/LC0066)
NOTE: Actual product design may differ from images shown in manual.
Make sure authentic LG Electronics components are used. Using a non-authentic
component may damage the product. The LG limited warranty does not cover
damage caused by the use of non-authentic components. Use the USB Type-C™
Charging and Data cable/USB-C™ to AUX cable provided with the product.
CAUTION
Download Manual
ENGLISH
3
Overview
[Charging Case]
Mood light
(When you open the
charging case, the
mood light turns on
and off.)
UVnano LED
Earbuds
charging
terminals
dCase
charging port
UVnano LED
cPlug and Wireless Mode Switch
Battery Status
Indicator (up)
UVnano Indicator
(down)
a
ENGLISH
4
[Earbuds]
Microphone
Microphone
Speaker
mesh
(Microphone)
Speaker
mesh
(Microphone)
bTouchpad Touchpad b
Earbuds
charging
terminals
Earbuds
charging
terminals
*Make sure that the Earbuds charging
terminal is not soiled with foreign substance.
*Theappearanceandspecicationsofthe
actual product may differ depending on
the model.
*To replace the ear gel, align the hole shape
of the ear gel with the protrusion of the
earbuds and fasten it.
ENGLISH
5
Using the Earbuds
aConnect the Earbuds to a mobile phone via Bluetooth
1 Tap the Setting [ / ] app on your mobile phone. Select and then
turn on the Bluetooth function. ( Off > On)
2 Open the cover of the charging case with the earbuds mounted on the case.
The battery status indicator on the front will blink blue.
If the battery status light does not blink blue, or if you want to connect a
device other than the one already connected, press and hold the touchpad
of the left or right earbud for 3 to 5 seconds.
~1m
3 When the Fast Pair connection pop-up appears on the bottom of the
mobile phone screen, tap it to connect.
4 If the pop-up does not appear, select [TONE-T90Q] from the Bluetooth
menu on the mobile phone and connect it.
•In the list of Bluetooth connected devices, TONE-T90Q_LE is not the
correct model name for connection.
Check the model name in use and connect with the model name without
“LE”.
Bluetooth name of the product is “TONE-T90Q”.
ENGLISH
6
bUsing the Earbuds with touch
Touch the earbuds to play or pause music, answer or reject calls.
You can change how the function works in the touchpad settings of the
“LG TONE Free” app.
Description
Mobile
Calling
Functions
Playing
Music
Plug and
Wireless Mode
Listen to
the Ambient
Sound (LAS) /
Active Noise
Cancellation
(ANC)
Touch once
Answering
Calls
Play /
Pause
Mute or
Unmute -
Touch twice
Ending
Calls
Decrease volume
(Touch the left)
Increase volume
(Touch the right)
-
Touch
three times
-Play
Next
Play Next song
(Connecting
with USB audio
device)
-
Touch and
hold
Rejecting
Calls - - Change the
functions
•When the charging case is connected to an analog device, touching it three
times triggers no response.
ENGLISH
7
•Connect the charging case to a USB audio device and then touch once to
play/pause music.
cConnecting to an External Device(Plug and Wireless
Mode)
You can connect the charging case to an analog device (airplane seat audio,
treadmill, cassette, radio, TV, etc.) or a USB audio device (PC) to listen to the
sound with the earbuds.
[How to connect analog devices]
1 Connect the USB-C™ side of the included USB-C™ to AUX cable to the
charging case.
2 Connect the AUX side to a device you want to use.
3 Wear the earbuds.
4 Push the Plug and Wireless Mode switch to the right to turn on the mode.
Theindicatoronthechargingcaseashesingreen.
5 Once the charging case is connected to the earbuds, the indicator turns
off.
•To disconnect an external device, push the Plug and Wireless Mode switch
to the left.
Theindicatoronthechargingcaseashesinblueandtheearbuds
reconnect to the device that was previously connected.
•If the device is not found, the earbuds enter the Connection Ready mode.
•Call function is not supported when connected to an analog device.
ENGLISH
8
[How to connect USB audio device]
1 Connect the USB-C™ side of the included USB Type-C™ Charging and
Data cable to the charging case.
2 Connect the USB-A side to a device you want to use.
3 Wear the earbuds.
4 Push the Plug and Wireless Mode switch to the right to turn on the
mode.
Theindicatoronthechargingcaseashesingreen.
5 Once the charging case is connected to the earbuds, the green indicator
turns off and the case charging status is displayed.
•To disconnect an external device, push the Plug and Wireless Mode switch
to the left .
Theindicatoronthechargingcaseashesinblueandtheearbuds
reconnect to the device that was previously connected.
•If the device is not found, the earbuds enter the Connection Ready mode.
dCharging
[Wired Charging] With the earbuds mounted to the charging case, connect
the charging cable to the charging case to charge. The earbuds and the
charging case are charged at the same time.
•The UVnano LED operates for 10 minutes when mounted in the charging
case while it is being charged.
[Wireless Charging] Align the bottom center of the charging case with the
center of the wireless charger.
ENGLISH
9
•When wirelessly charging, the UVnano LED sanitize the earbuds’ ear gels
for 10 minutes before charging.
CAUTION: Be aware that the temperature of the earbuds may rise while
the UVnano LED is on.
eConnecting the LG TONE Free app
1 Search for “LG TONE Free” in the Google Play Store or App Store on your
mobile phone or scan the QR code below to install the LG TONE Free app.
2 Run the app to use various functions. (Check Earbud Battery, Voice Alert,
Change Equalizer Mode, Check Last Connected Location Information, and
Find My Earbuds function, etc.)
<Android> <iOS>
ENGLISH
10
Dolby, Dolby Atmos, and the
double-D symbol are registered
trademarks of Dolby Laboratories
Licensing Corporation.
Manufactured under license from
DolbyLaboratories.Condential
unpublished works.
Copyright © 2012–2020 Dolby
Laboratories. All rights reserved.
Snapdragon Sound is a product of
Qualcomm Technologies, Inc. and/
or its subsidiaries.
Snapdragon and Snapdragon
Sound are trademarks or
registered trademarks of
Qualcomm Incorporated.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Auriculares de LG
LG
LG HBS-500 Manual de usuario
LG
LG TONE-TF8Q.AUSACBI Manual de usuario
LG
LG Tone Free TONE-T60Q Manual de usuario
LG
LG HBM-730 Manual de usuario
LG
LG HBS-500 Manual de usuario
LG
LG Tone PRO Manual de usuario
LG
LG LG TONE PRO HBS-780 Manual de usuario
LG
LG TONE PRO HBS-770 Manual de usuario
LG
LG TONE-FP8 Manual de usuario
LG
LG HBM-240 Manual de usuario
LG
LG Tone Infinim HBS900 Manual de usuario
LG
LG Tone Free HBS-FL7 Manual de usuario
LG
LG TONE Studio HBS-W120 Manual de usuario
LG
LG Tone Infinim HBS900 Manual de usuario
LG
LG TONE Free TONE-UFP9 Manual de usuario
LG
LG TONE Free TONE-UFP5 Manual de usuario
LG
LG HBM-230 Manual de usuario
LG
LG HBS-730 Manual de usuario
LG
LG TONE-FP7C Manual de usuario
LG
LG TONE Active HBS-850 Manual de usuario
