LG GSA-5169D Manual de usuario
External
External
Super Multi DVD Rewriter
Super Multi DVD Rewriter
GSA-5169D
English
i
CAUTION :
The laser used in the External Super Multi DVD can damage your eyes.
Do not attempt to open the cover.
To reduce the risk of electric shock, do not remove the cover (or back).
There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
Use of controls or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
WARNING : To reduce the risk of fire or electric shock, do not expose this appliance
to rain or moisture
Industry Canada requirement
This class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur
le matériel brouilleur du Canada.
FCC COMPLIANCE STATEMENT
Note :This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception,
which can be determined by turning the equipment off and
on, the user is encouraged
to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an Authorized Service Center for help.
• FCC WARNING
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
• This External Super Multi DVD is for use only with UL listed personal computers
that have installation instructions detailing user-installation of card cage accessory.
ii
WARNING: Only drives bearing the logo Compact Disc ReWritable Ultra Speed can
write or erase Ultra Speed CD-RW media.
Ultra Speed CD-RW Media may be recognized by the same Compact Disc ReWritable
Ultra Speed logo on the disc label or packaging material.
Attempting to write to Ultra Speed CD-RW media using CD-RW drives NOT bearing the
logo Compact Disc ReWritable Ultra Speed may result in data loss.
DVD+R Double Layer media may have compatibility problem with other drives.
For DVD-R Dual Layer: DVD-R Dual Layer is a write once media format with the
capacity to write up 8.5 GB.
This product is manufactured to comply with the radio interference requirements
of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC.
The appliance is not intended for use by young children or infirm persons without
supervision.
CAUTION - VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO THE BEAM.
VARNING - OSYNLIG LASERSTRÄLNING NÄR DENNA DEL ÄR ÖPPNAD
STRÄLEN ÄR FARLIG.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
CLASE 1 PRODUCTO LÁSER
CLASSE 1 PRODOTTO LASER
Introduction
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Important precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Location and function of controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Installation
Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Removing the USB converter cable . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Operation
Loading and ejecting a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Playing a music CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Playing DVD video and MPEG2 movie video . . . . . . . . . . . . . . . . . . . .10
Appendix
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
■Microsoft®and Windows®are trademarks registered in the United States and
other countries by the Microsoft Corporation.
■DVD Logo is a trademark of DVD Format/Logo Licensing Corp., registered in U.S.,
Japan and other countries.
■The company names and product names written in this manual are trademarks or
registered trademarks of the respective companies.
Contents
1
Thank you for purchasing the LG External Super Multi DVD Rewriter.
Features
• Universal Serial Bus (USB) 2.0 interface for high-speed data transfer.
• Buffer Under Run error protection technology.
• Emergency eject support.
• Combination of CD-R/RW, DVD-R/RW, DVD+R/RW, DVD+R DL,
DVD-R DL and DVD-RAM drive functions into one drive.
• Supports region playback control Phase II.
• A video capture DVD Rewriter with USB 2.0 interface for computers,
S-video and analog audio/video input terminals for video device.
Package contents
Introduction
2
Item Quantity
A. External Super Multi DVD Rewriter 1
B. USB 2.0 converter cable 1
C. AC Power Adapter (with Power supply cable) 1
D. Software CD
(DVD Writer Soultion, One touch DVD) 2
E. Quick Setup Guide 1
3
System meeting the following requirements is needed in order to use USB
2.0 operation with this drive.
•Computer that is equipped with a USB 2.0 – compliant USB connector or
PCI adapter card, and on which the USB 2.0 EHCI (Enhanced Host
Controller Interface) driver software 1) has been installed.
1) The USB 2.0 EHCI driver software is supplied with currently available PCI
adapter cards that conform to USB 2.0. Further, Microsoft has released the USB
2.0 EHCI driver software for Windows XP, therefore it is also possible to use this
driver software with Windows XP.
For more information, please contact your USB 2.0 adapter dealer, your PC
manufacturer, or the Microsoft Corporation Web site.
•To achieve maximum Record & Write speed your system may require
data to be copied first to the computer’s hard drive rather than directly
from another source disc or drive.
System requirements
Computer
This unit can be operated in the system environment explained here.
Cautions
* Compatibility problem in write/read function may occur with some media depending on the
media manufacturing quality.
CPU: Pentium III 800MHz, Memory: 256MB (Recommended for
optimal performance : Pentium IV 2.4GHz, Memory: 512MB or
greater) Pentium IV 1.6GHz or faster is required for AV Capture.
32MB or greater. (Recommended: 64MB)
10GB or more free space. (The free space needed for writing
depends on the quantity of data.) (DVD±DL:16GB)
USB port 2.0
For Software installation
Windows XP(Home Edition/ Professional/SP1,SP2),
Direct X 9.0 or Higher is required.
CD-R : LG, Mitsubishi Kagaku Media, Verbatim, Taiyo Yuden,
TDK, Ritek or HP discs are recommended.
CD-RW : LG, Ricoh, Mitsubishi Kagaku Media, Verbatim discs are
recommended.
DVD-R : Mitsubishi Kagaku Media, Verbatim, Taiyo Yuden are
recommended.
DVD-RW : JVC, Mitsubishi Kagaku Media, TDK, RITEK are
recommended.
DVD+R : Mitsubishi Kagaku Media, Verbatim are recommended.
DVD+RW :
TDK, FujiFilm, Ricoh, CMC, Mitsubishi Kagaku Media
are recommended.
DVD-RAM : Maxell, Panasonic are recommended.
DVD±R DL :
Mitsubishi Kagaku Media, Verbatim are recommended.
System
requirements
VGA Card Memory
Hard disk
Interface
CD-ROM drive
Software Required
OS
CD-R, CD-RW,
DVD-R, DVD-RW,
DVD+R, DVD+RW,
DVD-RAM,
DVD±R DL discs
4
Important precautions
Follow these precautions when handling the drive or discs.
Precautions
Please note that the manufacturer of this equipment does not offer any warranty
against data loss due to inappropriate installation, handling, direct or indirect
damages. Please note that the manufacturer will bear no responsibility for direct
or indirect damages (including lost data)caused by the use of this product or its
malfunction.
Please backup(copy) all important data as protection against data loss.
Installation
Avoid placing the drive in a location subject to:
- high humidity - high temperature - excessive dust
- mechanical vibration - direct sunlight
Operation
Don’t move the drive suddenly from a cold place to warm one.
Condensation may cause abnormal operation.
Make sure to remove the disc before moving the drive to prevent the possible
damage to the disc.
Prevent foreign objects, such as liquids or metal, from entering the drive and in
the case a foreign object enters the drive, please consult the dealer where the
drive was purchased.
Don’t interrupt the electric power while the drive is operating.
While drive is operating, don’t move the drive or give a shock to the drive, since it
can cause damage to the disc.
AC Adapter
Don’t plug in or remove the AC adapter using wet hands.
Don’t damage the AC adapter by scratching, modifying, or bending its prongs.
Use only supplied AC adapter.
Don’t disassemble the AC adapter.
Operation through a USB hub cannot be guaranteed.
When connecting with USB1.1 interface, picture and sound may be disrupted
while watching DVD Video due to lack of data transfer speed.
For smoother playback of DVDs, high-speed USB 2.0 should be used.
5
Location and function of controls
This following is the general figure of the design of the drive. The drive’s
appearance and specifications may change without prior notice.
12 345
1. One touch button/indicator
Select the one touch recording mode.
2. Disc Tray
3. Drive activity indicator
The LED used to indicate the operation of External Super Multi DVD
Rewriter.
4. Emergency Eject Hole
5. Stop/Eject Button
6. Audio In jack (L/R)
Connect the Audio cable(not supplied) when connecting the External
Super Multi DVD Rewriter to a video device such as a Video camera,
VCR or TV.
7. Video In jack
Connect the Video cable(not supplied) when connecting the External
Super Multi DVD Rewriter to a video device such as a Video camera,
VCR or TV.
8. S-Video In jack
Connect the S-Video cable(not supplied) when connecting the External
Super Multi DVD Rewriter to a video device such as a Video camera,
VCR or TV.
9. USB Connector
This connector is used to connect to the USB converter cable.
10. Power Connector
This connector is used to connect to the AC Power adapter cord.
678 910
6
Installation
Hardware Installation
A. Connecting to Computer
1. Connect the USB converter cable to
the External Super Multi DVD
Rewriter.
2. Connect the other end of the USB
converter cable to your computer.
3. Connect the AC adapter plug to the
power connector at the rear of the
drive.
Attach the AC adapter to the AC wall
outlet.
4. When the computer is ready, confirm
that the drive is detected. And then,
insert the supplied software CD into
the External Super Multi DVD Rewriter
and install the software.
B. Connecting to Camcorder or
Video Device
1. Connect the Camcorder or Video
device.
Refer to the manual supplied with the
device to be connected.
•Make sure you have a personal computer with an open USB port before connecting
the drive to your computer.
•Power for all devices should be turned off before attaching the cables.
Connect the drive to the computer and to a camcorder, VCR or video device with
Audio/Video cables or S-video cable(not supplied.) as shown in figure.
OR
If your Video device is equiped with S-Video output, you can connect an RCA cable
from the audio output of the video device to the audio input of the drive, and S-Video
cable from the S-Video output of the video device to the S-Video input of the drive.
NOTE
7
Removing the USB converter cable
The drive supports the plug and play(not swap) function of Windows, and
can be removed and inserted by performing the following operation.
1. Stop the application software being currently used.
2. Click the icon “ ” of the taskbar located on your screen’s bottom right
side.
3. Click “Safely Remove USB Mass Storage Device-Drive[x:]”.
4. Click “Ok” and then remove the USB converter cable.
Don’t remove the USB converter cable when the busy indicator on the drive
blinks, or during computer startup.
NOTE
Otros manuales para GSA-5169D
3
Tabla de contenidos
Otros manuales de Unidad de DVD de LG
LG
LG GSA-4167B Guía
LG
LG DRD-840B Manual de usuario
LG
LG GSA-H55LI Manual de usuario
LG
LG GH22LP20 - Super Multi Manual de usuario
LG
LG GP08LU11 Manual de usuario
LG
LG GP70 Manual de usuario
LG
LG GSA-E10N Manual de usuario
LG
LG GP08 Manual de usuario
LG
LG GSA-H54N Manual de usuario
LG
LG GSA-5160D Manual de usuario
LG
LG GH22NP21 Manual de usuario
LG
LG GSA-4167B Manual de usuario
LG
LG GP08NU6R Manual de usuario
LG
LG GH22LS50 Manual de usuario
LG
LG GE24LU21 Manual de usuario
LG
LG BE06LU11 - Super Multi Guía del usuario
LG
LG GH22NS40 Manual de usuario
LG
LG GGW-H20L Manual de usuario
LG
LG GSA-4163B Manual de usuario
LG
LG GSA-H10A Manual de usuario
