LG GD330 Manual de usuario

USER GUIDE

ENGLISH

GD330

This document is the user guide for the LG

330 Mobile Phone.

All rights for this document are reserved by LG Electronics.

Copying, modifying and distributing this document without the consent of

LG Electronics are prohibited.

Part 15.21 statement

" Change or Modifications that are not expressly approved by the manufacturer could void

the user's authority to operate the equipment. “

Part 15.105 statement

This equipment has been tested and found to comply with the limits for a class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. if this equipment does cause harmful interference or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Part 15 Class B Compliance

This device and its accessories comply with part15 of FCC rules.

Operation is subject to the following two conditions:

(1) This device & its accessories may not cause harmful interference.

(2) This device & its accessories must accept any interference received,

including interference that may cause undesired operation.

Body-worn Operation

This device has been tested for typical body-worn operations

with the distance of 0.79inches (2.0cm) from the user’s body.

To comply with FCC RF exposure requirements, a minimum separation distance

of 0.79inches(2.0cm) must be maintained from the user's body.

Additionally, Belt clips, holsters & other body-worn accessories may not contain

metallic components.

General Functions

Making and

answering calls

Making a call

1. Make sure your phone is powered

on.

2. Enter a phone number including

the area code.

►Press and hold the key to

erase the entire number.

3. Press the key to make the call.

4. To end the call, press the key.

Making a call from the call

history list

1. In standby mode, press the

key, and the latest incoming,

outgoing and missed phone

numbers will be displayed.

2. Select the desired number by using

the up/down navigation key.

3. Press the key.

Making an international

call

1. Press and hold the key for the

international prefix.

The‘+’character automatically

selects the international access

code.

2. Enter the country code, area code,

and the phone number.

3. Press the key.

Ending a call

When you have finished your call,

press the key.

Making a call from the

Contacts

You can save the names and phone

numbers dialed frequently in the SIM

card as well as the phone memory

known as the contacts list. You can

dial a number by simply looking up

the desired name in the contacts.

Answering a call

When you receive a call, the phone

rings and the flashing phone icon

appears on the screen. To identify

the caller, the caller’s phone number

(or name if saved in the contacts) is

displayed.

1. To answer an incoming call, open

the phone when

Flip open

has

been set as the answer mode. You

can change the answer mode what

you want by using the

Answer

mode

feature.

Note

If the

Any key

has been set as the

answer mode, any key press will

answer a call except for the key

or the right soft key.

►To reject an incoming call, press

and hold one of the side keys on

the left side of the phone without

opening the flip.

►You can answer a call while using

the

Contacts

or other menu

features.

2. To end the call, close the phone or

press the key.

Signal strength

You can check the strength of your

signal by the signal indicator ( )

on the LCD screen of your phone.

Signal strength can vary, particularly

inside buildings. Moving near to a

window may improve reception.

Entering text

You can enter alphanumeric

characters by using the phone’s

keypad.

For example, storing names in the

contacts, writing a message, creating

a personal greeting.The following

text input methods are available in

the phone.

General Functions

T9 (T9 Abc) mode

This mode lets you enter words

with only one keystroke per

letter. Each key on the keypad

has more than one letter. The T9

mode automatically compares

your keystrokes with an internal

dictionary to determine the correct

word, thus requiring far fewer

keystrokes than the traditional ABC

mode. This is sometimes known as

predictive text.

ABC mode

This mode lets you enter letters by

pressing the key labeled with the

required letter once, twice, three

or four times until the letter is

displayed.

123 mode (Number mode)

Type numbers using one keystroke

per number. To change to 123 mode

in a text entry field, press the

key until 123 mode is displayed.

Changing the text

input mode

1. When you are in a field that allows

characters to be entered, you

will notice the text input mode

indicator in the lower right corner of

the LCD screen.

2. Change the text input mode by

pressing the key. You can

check the current text input mode

in the lower right corner of the LCD

screen.

Using the T9 mode

The T9 predictive text input mode

lets you enter words easily with a

minimum number of key presses. As

you press each key, the phone begins

to display the characters that it thinks

you are typing based on the built-in

dictionary. You can also add new

words in the dictionary. As new words

are added, the word changes to

reflect the most likely candidate from

the dictionary.

1. When you are in the T9 predictive

text input mode, start entering a

word by pressing keys to .

Press one key per letter.

►The word changes as letters are

typed. Ignore what’s on the screen

until the word is typed completely.

►If the word is still incorrect after

typing completely, press the

key once or more or press the down

navigation key to cycle through the

other word options.

Example

Press to type

Good

►If the desired word is missing from

the word choice list, add it as a new

T9 word, using the ABC mode.

►You can select the language of the

T9 mode. Press the left soft key

[Option], then select

languages

Select the desired language of T9

mode. You can also turn off the

T9 mode by selecting

off

. The

default setting on the phone is T9

enabled mode.

2. Enter the whole word before

editing or deleting any keystrokes.

3. Complete each word with a space

by pressing the key. To delete

letters, press the key. Press and

hold down the key to erase

entire words.

Note

To exit from the text input mode,

press the key.The phone goes

back to standby mode and the

edited message gets stored in drafts.

Using the ABC mode

Use the to keys to enter

your text.

1. Press the key labeled with the

required letter:

►Once for the first letter

►Twice for the second letter

►And so on

General Functions

2. To insert a space, press the right

navigation key or key once.

To delete letters, press the key.

Press and hold down the key

to clear the whole text.

Note

Refer to the table below for more

information on the characters

available using the alphanumeric

keys.

Key Characters in the order display

Upper case Lower Case

. , / ? ! - :‘“ 1 . , / ? ! - :‘“ 1

A B C 2 À Â Æ Ç a b c 2 à â æ ç

D E F 3 Ê Ë d e f 3 ê ë

G H I 4 Î Ï g h i 4 î ï

J K L 5 j k l 5

M N O 6 Ñ Ô Ö Œ m n o 6 ñ ô ö œ

P Q R S 7 p q r s 7

T U V 8 Û t u v 8 û

W X Y Z 9 Ŵ Ŷ w x y z 9 ŵ ŷ

Space, 0 Space, 0

Note

The characters assigned to the

keys and their order of appearance

depends upon the language

selected using the option Input

method. The table above provides

the characters set for English

language.

Using the 123 (Number) mode

The 123 mode enables you to

enter numbers in a text message (a

telephone number, for example).

Press the keys corresponding to

the required digits before manually

switching back to the appropriate text

entry mode.

Using the symbol mode

The symbol mode enables you to

enter various symbols or special

characters. To enter a symbol, select

Options

→

Insert

→

Symbol

. Use

the navigation and numeric keys to

select the desired symbol and press

the OK key.

In-call menu

Your phone provides a number of

control functions that you can use

during a call. To access these functions

during a call, press the left soft key

[Options].

During a call

The menu displayed on the handset

screen during a call is different than

the default main menu displayed

when in idle screen, and the options

are described below.

Making a Second Call

(Network Dependent)

You can search and dial the number

from

Contacts

to make a second call.

Swapping Between Two Calls

To switch between two calls, press the

key or the left soft key, and then

select

Swap Call

Answering an Incoming Call

To answer an incoming call when the

handset is ringing, simply press the

key. The handset is also able to

warn you of an incoming call while

you are already on a call.

A tone sounds in the earpiece, and

the display will show that a second

call is waiting.

This feature, known as

Call waiting

is only available if your network

supports it. For details of how to

activate and deactivate it see Call

waiting feature.

Call waiting

is on, you can put

the first call on hold and answer the

second, by pressing the left soft key.

Rejecting an Incoming Call

You can reject an incoming call

without answering by simply pressing

the key.

During a call, you can reject an

incoming call by pressing the

key.

In-call menu

Muting the Microphone

You can mute the microphone

during a call by pressing the right

soft key [Mute]. The handset can be

unmuted by pressing the right soft

key [Unmute]. When the handset is

muted, the caller cannot hear you, but

you can still hear them.

DTMF tones while calling

To switch on DTMF tones while

calling (e.g. to use the phone with

an automatic switchboard) press the

left soft key [Options] followed by

Enable DTMF. Select Disable DTMF to

disable DTMF tones. DTMF tones are

normally on.

Conference Calls

The conference service provides

you with the ability to have a

simultaneous conversation with

more than one caller, if your network

service provider supports this feature.

A conference call can only be set up

when you have one active call and

one call on hold, both calls having

been answered.

Once a conference call is set up,

calls may be added, disconnected or

separated (that is, removed from the

conference call but still connected to

you) by the person who set up the

conference call. These options are

all available from the In-Call menu.

The maximum callers in a conference

call are five. Once started, you are

in control of the conference call,

and only you can add calls to the

conference call.

Making a Second Call

You can make a second call while

currently in call. Enter the second

number and press the key.

When the second call is connected,

the first call is automatically placed on

hold. You can swap between calls, by

pressing the key.

In-call menu

Otros manuales para GD330

Tabla de contenidos

Manuales populares de Teléfono móvil de otras marcas

Zte

Zte BLADE A520 Manual de usuario

Nokia

Nokia Lumia 620 Manual de usuario

Blackbe;rry

Blackbe;rry KEYone Manual de usuario

Bea-fon

Bea-fon X5 Premium Manual de usuario

Blackbe;rry

Blackbe;rry 8707 Series Manual de usuario

Blackbe;rry

Blackbe;rry Storm Instrucciones de funcionamiento

LifeWatch

LifeWatch V Manual de usuario

Bea-fon

Bea-fon SILVER LINE SL860 Manual de usuario

IKI Mobile

IKI Mobile KF4.5i Manual de usuario

Hitech

Hitech HT-850 Manual de usuario

Yezz

Yezz Fashion F10 Manual de usuario

Point Mobile

Point Mobile PM60 Manual de usuario

Blackbe;rry

Blackbe;rry Q10 Manual de usuario

Blackbe;rry

Blackbe;rry Bold 9900 Manual de usuario

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manual de usuario

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manual de usuario

Blackbe;rry

Blackbe;rry CURVE 8300 - SMARTPHONE Manual de usuario

Blackbe;rry

Blackbe;rry 8707 - VERSION 4.1 Manual de usuario