LG 100C Manual de usuario

Part 15.21 statement

" Change or Modifications that are not expressly approved by the manufacturer could void

the user's authority to operate the equipment. “

Part 15.105 statement

This equipment has been tested and found to comply with the limits for a class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Part 15 Class B Compliance

This device and its accessories comply with part15 of FCC rules.

Operation is subject to the following two conditions:

(1) This device & its accessories may not cause harmful interference.

(2) This device & its accessories must accept any interference received,

including interference that may cause undesired operation.

Body-worn Operation

This device has been tested for typical body-worn operations

with the distance of 0.79inches (2.0cm) from the user’s body.

To comply with FCC RF exposure requirements, a minimum separation distance

of 0.79inches(2.0cm) must be maintained from the user's body.

Additionally, Belt clips, holsters & other body-worn accessories may not contain

metallic components.

WELCOME

Thank you for choosing the advanced and compact LG100C cellular phone, designed to

operate with the latest digital mobile communication technology, Code Division Multiple Access

(CDMA). Along with the many advanced features of the CDMA system, such as significantly

enhanced voice clarity, this phone offers:

Earpiece

Navigation

Keys

END/PWR

Key

SEND Key

Left Soft Key

LCD

Screen

Headset Jack

Manner

Mode Key

Right Soft

Key

Alphanumeric

Keypad

Microphone

●

Large, easy-to-read, 7-line backlight

LCD with status icons.

●

Paging, messaging, voice mail, and

caller ID.

●

22-key keypad.

●

Speaker phone feature.

●

Menu-driven interface with prompts

for easy operation and configuration.

●

Any key answer, auto answer, auto

retry, one-touch and speed dialing

with 99 memory locations.

●

Bilingual (English and Spanish)

capabilities.

●

Internal Antenna, described as

'antenna' throughout this user guide.

OK Key

GETTING STARTED WITH YOUR PHONE

Installing the Battery

To install the battery, insert the battery into

the opening on the back of the phone. Put

the battery cover on the battery and push it

slightly upwards.

Removing the Battery

Turn the power off. Slide the cover

downwards, then lift the cover off the phone.

Using your fingernail, grab the top of the

battery and lift away from the phone.

Charging the Battery

To use the charger provided with your

phone:

1. Plug the end of the adapter into the

phone’s charger port and the other end

into an electrical outlet.

2. The charge time varies depending upon

the battery level.

Turning the Phone On

1. Install a charged battery or connect the

phone to an external power source such as

a cigarette lighter charger or hands-free

car kit.

2. Press until the LCD screen lights up.

Turning the Phone Off

1. Press and hold until the display turns

off.

Making Calls

1. Make sure the phone is turned on. If not,

press for about 3 seconds.

2. Enter the phone number (include the area

code if needed).

3. Press . lf the phone is locked, enter

the lock code.

4. Press to end the call.

Receiving Calls

1. When the phone rings or vibrates press

to answer.

2. Press twice to end the call.

Manner Mode

Use Manner Mode in public places. When

Manner Mode is set, is displayed on

the screen, the key tones are silent, and the

phone is set to vibrate.

Manner Mode Quick Activation

1. From Standby Mode press for 3

seconds.

GETTING STARTED WITH YOUR PHONE

PREPAID

Manner Mode Quick Cancellation

1. From Standby Mode press for 3

seconds.

Menu Access

Press Left Soft Key [Menu] to have

access to six phone menus. There are two

methods to access menus and submenus:

●

Use the navigation key to highlight and

select, or

●

Press the number key that corresponds to

the menu or submenu.

Prepaid

The Prepaid Menu provides shortcuts to

access useful account information.

1. Add Airtime

, ,

Add Airtime allows you to start an over-the-

air request for additional airtime.

2. Buy Airtime

, ,

Buy Airtime allows you to start an over-the-air

request for purchase additional airtime.

3. My Phone Number

, ,

Phone Number displays the phone's

programmed MSID or MDN.

4. Airtime Info

, ,

Airtime Info displays the amount of airtime

by the unit and due date information.

5. Airtime Display

, ,

Airtime Display allows you to disable/enable

the display of idle screen, prepaid-related

information.

6. Serial Number

, ,

Serial Number simply displays the

information of your phone’s MEID.

7. Code Entry Mode

, ,

Code Entry Mode will allow the phone to

accept T

racfone-related codes in order to

add units, modify specific data and

troubleshoot the phone. In using the Code

Entry Mode, you can't receive incoming calls

or use events alert.

CONTACTS

Contacts

The Contacts Menu allows you to store

names, phone numbers and other information

in your phone’s memory.

1. New Contact

, ,

Allows you to add a new contact to your

Contact List:

1.Enter the name, then press .

2. Highlight the field you wish to store the

contact information in.

3. Enter the phone number or e-mail address.

4. Continue adding the desired contact

information to the entry.

5. When you are finished entering the desired

contact information, press Save Key

to save the entry into your Contact List.

2. Contact List

, ,

Allows you to view your Contact List.

1. 2. Choose from the following options:

●

Press to scroll through your

Contacts alphabetically.

●

Press [Options] to select one of

the following: Send Message/ Delete/

Edit/Delete Multiple/ Set(Remove)

Speed Dial

●

Press View to view the contact's

information.

●

Press [New] to store new contact

information.

3. Groups

, ,

Allows you to view your grouped Contacts,

add a new group, change the name of a

group, or delete a whole group.

1. Choose from the following options:

●

Use to highlight a group, then

press [View] to view the contacts in the

selected group.

●

Press [New] to add a new group.

●

Use to highlight a group, then

press [Options] to choose from the

following options: Delete/ Send

Message/Rename Group/Set Ringtone/

Delete All

CONTACTS

4. Speed Dials

, ,

Allows you to view your Speed Dials list,

designate new Speed Dials, or remove Speed

Dial designations entered in your Contacts.

1. Use to highlight the desired Speed

Dial location (or enter the Speed Dial

digit), and press Assign.

2. Use to highlight the Contact then

press .

3. Use to highlight the number (if

applicable), then press . A confirmation

message is displayed.

5. My Name Card

, ,

Allows you to view all of your personal

Contact information including name and

phone numbers.Options from here:

1. Use to highlight the feature you wish

to edit, and press Edit.

2. Edit the information as desired and press

NNoottee

You cannot edit the default (Mobile1)

number, but you can add and edit

additional phone numbers and other

contact info.

MESSAGES

Messages

1. New Message

Allows you to send text messages, pages, and

e-mail transmissions. Each message will be

formatted and sent according to the

destination address.

1. Enter the recipient's address.

2. Press to access the message screen.

3. Type your message (text or e-mail).

4. Press Send.

A confirmation message is displayed.

Select Recipient(s) Using Options

1. Press Options.

2. Use to highlight an option and press

Contacts To select a recipient from

your Contact List.

Recent Calls To select a recipient from

your Recent Calls.

Recent Messages Choose Inbox/ Sent to

select a recipient from

your Recent Messages.

Groups Select a recipient from

your Groups.

General/ Family/ Friends/

Colleagues/ Business/

School

Cancel Cancels editing your

message.

4. Complete your message and press

to send it, or go to Options (while

entering text) to Save it.

Customize Your Text Message Using

Options

While you are composing the text of a

message you can insert customized text.

1. Enter the recipient's address.

2. Use or press to highlight the

Message window.

3. Press Options.

4. Use to highlight an option and

press .

The options available to customize your

text message are:

Add Templates/ Signature

Save As Draft/ Templates

Priority Level Normal/ High

MESSAGES

Callback # On/ Off

Delivery Notice Enhanced/ Normal

Cancel Cancels editing your

message.

6. Complete your message and press

to Send.

3. Inbox

, ,

The phone alerts you in 2 ways when you

receive a new message by:

●

Displaying a notification message on the

screen.

●

Displaying the message icon (It blinks

when the message is urgent).

Received messages are displayed from newest

to oldest.

Viewing Your Inbox

Up to 200 received messages can be stored

in the Inbox.

1. Use to highlight an inbox message.

2. Press Reply to reply, View to

view the message, or Options to

access additional options.

The options are:

Delete/ Forward/ Save Contact/ Lock/

Message Info/ Delete Multiple

When viewing a particular text message, the

Options menu will contain the

following options:

Delete Deletes the selected

message.

Forward Forwards a received

message to other

destination address(es).

Save Contact Stores the callback

number, e-mail address,

and numbers in the

received message into

your Contacts.

Save as Templates Stores the message as a

template for future

messages.

Call Back Calls the number in the

received message.

Go to website Accesses the website by

starting Alltel Web.

3. Sent

, ,

Up to 50 sent messages can be stored in the

Sent folder. Access the Sent message list to

view contents of sent messages and verify

whether the transmission was successful or

not.

1. Use to highlight a sent message.

Press Resend to resend the message

MESSAGES

to the recipient, View to view the

message, or Options to access

additional options (below):

Delete/ Forward/ Save Contact/ Lock/

Message Info/ Delete Multiple

3. While viewing the selected sent message,

press Resend to resend the message

to the recipient, or Options to

access additional options (below):

Delete Deletes the selected

message.

Forward Forwards a received

message to other

destination address(es).

Save Contact Stores the callback number,

e-mail address, and

numbers in the received

message into your

Contacts.

Save as Templates Stores the message as a

template for future

messages.

Lock/Unlock Locks or unlocks the

selected message.

Message Info Shows the message type

priority and status.

4. Drafts

, ,

Displays saved messages and draft messages.

1. Use to highlight a Saved message.

●

Press to Edit.

●

Or press the Options to view the

options available (below):

Delete Deletes the selected

message from the Drafts.

Save Contact Select Save New/ Update

Existing to store the

callback number, e-mail

address,and numbers in the

received message into your

Contacts or update an

existing contact already

stored in memory.

Lock/Unlock Locks a message so that it

is not erased if the Erase

Saved or Erase All feature is

used.

Delete Multiple Select Selective/ All to

delete multiple messages at

one time.

5. Voice Mail

, ,

Allows you to hear new voice messages

recorded in your voice mail box. Your phone

will alert you when you receive a new voice

message.

Otros manuales para 100C

Tabla de contenidos

Manuales populares de Teléfono móvil de otras marcas

Zte

Zte BLADE A520 Manual de usuario

Nokia

Nokia Lumia 620 Manual de usuario

Blackbe;rry

Blackbe;rry KEYone Manual de usuario

Bea-fon

Bea-fon X5 Premium Manual de usuario

Blackbe;rry

Blackbe;rry 8707 Series Manual de usuario

Blackbe;rry

Blackbe;rry Storm Instrucciones de funcionamiento

LifeWatch

LifeWatch V Manual de usuario

Bea-fon

Bea-fon SILVER LINE SL860 Manual de usuario

IKI Mobile

IKI Mobile KF4.5i Manual de usuario

Hitech

Hitech HT-850 Manual de usuario

Yezz

Yezz Fashion F10 Manual de usuario

Point Mobile

Point Mobile PM60 Manual de usuario

Blackbe;rry

Blackbe;rry Q10 Manual de usuario

Blackbe;rry

Blackbe;rry Bold 9900 Manual de usuario

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manual de usuario

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manual de usuario

Blackbe;rry

Blackbe;rry CURVE 8300 - SMARTPHONE Manual de usuario

Blackbe;rry

Blackbe;rry 8707 - VERSION 4.1 Manual de usuario