LG RESU FLEX Manual de usuario
Full Installation Manual for RESU FLEX
LG Energy Solution strongly advises users to exercise due care in following LG Energy
Solution’s product installation manual. Warranty claims are invalid if damage is caused
by human error in a manner inconsistent with the installation manual’s instructions.
Version 1.0
2
About this manual
This manual describes how to install LG Energy Solution’s RESU FLEX battery
pack. Read this manual before you attempt to install the product, and follow the
instructions throughout the installation process. If you are uncertain about any
of the requirements, recommendations, or safety procedures described in this
manual, contact LG Energy Solution immediately for advice and clarication.
The information included in this manual is accurate at the time of publication.
However, the product specications are subject to change without prior notice.
In addition, the illustrations in this manual are meant to help explain system
conguration concepts and installation instructions. The illustrated items may
differ from the actual items at the installation location.
1. Safety ············································································································· 5
1.1 Symbols ·······················································································································5
1.2 Safety Instructions ··································································································5
1.2.1 General Safety Precautions ········································································5
1.2.2 Battery Handling Guide ············································································· 6
1.2.3 Response to Emergency Situations ······················································ 8
1.3 Warning Label ········································································································· 9
1.3.1 BPU ····················································································································· 9
1.3.2 BMA ··················································································································10
2. Product Introduction ················································································· 11
2.1 Technical Data ········································································································· 11
2.1.1 Dimensions and Weight ·············································································· 11
2.1.2 Performance ·································································································· 12
2.1.3 Arc Flash Protection Calculations ························································ 13
2.2 Features ··················································································································· 15
2.3 Maintenance ··········································································································· 15
2.4 Packaging Specications ·················································································· 15
Contents
ENGLISH
3
3. Installation ································································································· 16
3.1 Package Contents ·································································································16
3.1.1 BPU Package ································································································16
3.1.2 BPU Bundle Package ················································································16
3.1.3 BMA Package ································································································ 17
3.1.4 Option Item Package (Optional Standing type) ····························· 17
3.1.5 Option Item Package (Wall Mounting type) ···································· 18
3.2 Installation Location ···························································································· 18
3.3 Lifting Guide ··········································································································19
3.3.1 Only BMA ·······································································································19
3.3.2 BMA With Basic Standing Bracket ······················································19
3.3.3 BMA With Optional Standing Bracket ··············································20
3.3.4 BMA With Pack Mounting Bracket ·····················································20
3.4 Tools ························································································································ 21
3.5 Safety Gear ············································································································ 22
3.6 Standing Installation (Basic Standing / Optional Standing) ·····················22
3.6.1 Items for Stand type (Basic Standing / Optional Standing) ····· 22
3.6.2 Clearance ······································································································ 22
3.6.3 Install Battery Pack for Stand type ··················································· 23
3.6.4 Finalizing Installation ···············································································29
3.7 Wall-mounting Installation ··············································································· 31
3.7.1 Items for Wall Mount Type ····································································· 32
3.7.2 Clearance ······································································································ 32
3.7.3 Mounting Brackets Installation ···························································· 32
3.7.4
Installation and Cable Connection of BMA and BPU for Wall type
··34
3.7.5 Finalizing Installation ·············································································· 40
4. Connection to the Inverter ······································································ 42
4.1 Prepare for connection ······················································································42
4.2 Communication Line Connection ·································································43
4.3 Power (Charging/Discharging) Line Connection ···································45
4.4 End of Connection ·····························································································46
4
5 Commissioning ··························································································· 48
5.1 Pre-preparation ····································································································48
5.1.1 Account ···········································································································48
5.1.2 App ··················································································································48
5.2 Battery Setting . ····················································································································49
5.3 LED Indicator ········································································································49
5.3.1 LED State for Battery Setting ·······························································50
5.3.2 LED state for operation ··········································································50
5.3.3 Powering On the Battery Pack ····························································· 51
5.3.4 Shutting Off the Battery Pack ······························································· 51
6. Troubleshooting ························································································ 52
6.1 Troubleshooting Overview ··············································································· 52
6.1.1 Post-Installation Checklist ······································································· 53
6.12 Troubleshooting Guidelines ····································································54
6.1.3 Contact Information ··················································································56
ENGLISH
5
1. Safety
1.1 Symbols
Caution, risk of electric shock
Do not place or install near ammable or explosive materials
Install the product out of reach of children
Read the instruction manual, in its entirety, before starting installation and
operation
Heavy weight may cause serious back injuries
Do not dispose of the product with household waste
Recyclable
Disconnect the equipment before carrying out maintenance or repair
Observe precautions for handling electrostatic-sensitive devices
Protective Class 1
Caution, risk of electric shock, energy storage timed discharge.
1.2 Safety Instructions
For safety reasons, installers are responsible for familiarizing themselves
with the contents of this document and all warnings before performing
installation and service.
1.2.1 General Safety Precautions
Over-voltages or wrong wiring can damage the battery pack and cause
combustion, which can be extremely dangerous.
Any type of product breakdown may lead to a leakage of electrolytes or
ammable gas.
Avoid installing the battery pack where ammable materials are stored. Do
not install in places where explosive gas or chemicals are present.
During installation of the battery, the utility grid and solar input must be
6
disconnected from the Battery Pack wiring. Wiring must be carried out by
qualied personnel.
Battery pack should only be serviced by qualied personnel.
The electronics inside the battery pack are vulnerable to electrostatic
discharge.
Be sure to be grounded before handling the battery pack.
Read the label with Warning Symbols and Precautions, which are visible
under the Battery Cover (see Section 1.3 Warning Label).
1.2.2 Battery Handling Guide
• Do not expose the battery to an open ame.
• Do not place the product near to highly ammable materials.
• Do not expose or place near water sources such as downspouts or
sprinklers.
• Do not store or install the product in direct sunlight.
• Do not install the product in an airtight enclosure or in an area without
ventilation.
• Do not install the product in living area of dwelling units or in sleeping
units other than within utility closets and storage or utility spaces.
• Store in a cool and dry place. (Do not store in greenhouses or storage
areas for hay, straw, chaff, animal feed, fertilizer, vegetables, or fruit
products.)
• Store the product on a at, level surface.
• Store the product out of reach of children and animals.
• Store the product in clean environment, free of dust, dirt and debris.
• Do not disconnect, disassemble or repair the product unqualied
personnel. Only qualied personal are to handle, install and service the
Product.
• Do not damage the Product by dropping, deforming, impacting, cutting
or penetrating with a sharp object. Doing so may cause a re or leakage
of electrolytes.
ENGLISH
7
• Do not touch the product if liquid spills on it. There is a risk of electric
shock. Handle the battery wearing insulated gloves.
• Do not step on the product or the product՚s packaging since the
product may be damaged.
• Do not place any foreign objects on top of the Battery Pack and on the
cooling n.
• Do not put the battery pack upside down on the ground.
• Do not connect the power cables at terminal the block in the opposite
direction.
• Do not charge or discharge a damaged battery.
• If the Product is installed in a garage or carport, ensure there is
adequate clearance from vehicles.
• The battery pack has been certied IP55 and can be installed indoors
as well as outdoors. However, if installed outdoors, do not allow the
battery pack to be exposed to direct sunlight or water sources, as they
may cause:
- Power limitation phenomena in the battery (with a resulting decrease
in energy production by the system).
- Premature wear of the electrical/electromechanical and mechanical
components.
- Reduction in performance, performance warranty and possible
damage of the battery
• Only use the product with a LGES-authorized inverter.
For a list of compatible inverters, go to :
https://www.lgessbattery.com/us (in case of North America)
https://www.lgessbattery.com/au (in case of Australia)
https://www.lgessbattery.com/eu (in case of all EU-countries in general)
https://www.lgessbattery.com/de (in case of Germany)
https://www.lgessbattery.com/it (in case of Italy)
https://www.lgessbattery.com/es (in case of Spain)
• Do not connect any AC conductors or photovoltaic conductors directly
to the battery pack. These are only to be connected to the inverter.
8
1.2.3 Response to Emergency Situations
The Product includes internal fault mechanisms designed to prevent
failures and subsequent risk hazards. However, LG ES cannot guarantee
safety performance of the Product is ever exposed to abuse, damage or
negligence.
• If a user happens to be exposed to the internal materials of the battery
cell due to damage on the outer casing, the following actions are
recommended.
In case of inhalation: Leave the contaminated area immediately and
seek medical attention.
In case of contact with eyes: Rinse eyes with running water for 15
minutes and seek medical attention.
In case of contact with skin: Wash the contacted area with soap
thoroughly and seek medical attention.
In case of ingestion: Induce vomiting and seek medical attention.
If a re breaks out at the location where the battery pack is installed,
perform the following countermeasures.
• Utilize re-extinguishing media
A respirator is not required during normal operation.
Use an FM-200 or CO2 extinguisher for battery res.
Use an ABC re extinguisher if the re is not from the battery and has
not yet spread to it.
• Follow proper re-ghting instructions
1) If a re occurs when charging batteries, provided it is safe to do so,
disconnect the battery pack circuit breaker to shut off the power
charge.
2) If the battery pack is not on re yet, extinguish the re before the
battery pack catches re preferably with water.
3) If the battery pack is on re, do not try to extinguish it, and evacuate
people from the premises immediately.
ENGLISH
9
1.3 Warning Label
Product/warning label and Battery Control Unit’s traceable label are
behind the front cover. The Design cover opens. Battery Modules’
traceable labels are attached to the side of the Battery Modules.
1.3.1 BPU
1. Product/Warning label 2. Traceable label
10
1.3.2 BMA
1. Warning label
4.3 kWh
RESU FLEX
EH117037P9S1
48.0kg(105.8lb)
117.44V
INP5/101/150[5P32S]E/-10+50/95
37.0 Ah
2. BMA label
①
②
①
PJT Name Criteria
EH117037P9S1 B
Country of production
Line
M A
②
Year Month Day
21 07 16
Production number
3 digits (0001 – 9999)
Otros manuales para RESU FLEX
1
Tabla de contenidos
Otros manuales de Paquete de baterías de LG
LG
LG BP4 Manual de usuario
LG
LG ESS Home 8 Manual de usuario
LG
LG ESS Home 10 Manual de usuario
LG
LG BLGRESU10HP Manual de usuario
LG
LG BLGRESU7H Manual de usuario
LG
LG ESS Home 8 Manual de usuario
LG
LG RESU3.3 Manual de usuario
LG
LG RESU16H Prime Manual de usuario
LG
LG RESU 10H DLT Manual de usuario
LG
LG D005KD1N111 Manual de usuario
Manuales populares de Paquete de baterías de otras marcas
IOGear
IOGear GBP24V Series Manual de usuario
Inventus Power
Inventus Power PROTRXion S-12V100-TRX-HD Manual de usuario
Clas Ohlson
Clas Ohlson PW-290A Manual de usuario
EINHELL
EINHELL MULTI-Ah Power X-Change Plus Manual de usuario
Samsung
Samsung EB-U3300 Manual de usuario
ECTIVE
ECTIVE LC Series Manual de usuario