LG APNQ24GS1A3 Manual de usuario

OWNER’S MANUAL
Floor Standing
APNQ24GS1A3
I.15.LEI3.02843.0717
AIR
CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
www.lg.com
Copyright © 2016 - 2019 LG Electronics Inc. All Rights Reserved.
MFL67724516
Rev.00_032119
ENGLISH
Tiếng Việt
BAHASA INDONESIA

2TIPS FOR SAVING ENERGY
ENGLISH
TIPS FOR SAVING ENERGY
Here are some tips that will help you minimize the power consumption when you use the air
conditioner. You can use your air conditioner more efficiently by referring to the instructions
below:
• Do not cool excessively indoors. This may be harmful for your health and may consume
more electricity.
• Block sunlight with blinds or curtains while you are operating the air conditioner.
• Keep doors and windows closed tightly while you are operating the air conditioner.
• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.
• Speed up the fan to cool indoor air quickly, in a short period of time.
• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may
block the air flow or weaken the cooling / dehumidifying functions.
For your records
Staple your receipt to this page in case you need it to prove the date of purchase or for warranty
purposes. Write the model number and the serial number here:
Model number :
Serial number :
You can find them on a label on the side of each unit.
Dealer’s name :
Date of purchase :

IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product.
WARNING
It can result in serious injury or death when the directions are ignored.
CAUTION
It can result in minor injury or product damage when the directions are ignored.
WARNING
• Install or repair by unqualified persons can result in hazards to you and others.
• Installation MUST comply with local building codes. If there is no local codes, comply with the
Nation Electrical Code NFPA 70/ANSI C1-1003, Canadian Electrical Code Part1 CSA C.22.1. or
current edition.
• The information contained in the manual is intended for use by a qualified service technician
familiar with safety procedures and equipped with the proper tools and test instruments.
• Failure to carefully read and follow all instructions in this manual can result in equipment
malfunction, property damage, personal injury or death.
•
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Installation
• Do not install duct through disassemble or repair the product yourself.
- This product can not install duct.
• Do not use a defective or underrated circuit breaker. Use this appliance on a dedicated circuit.
- There is risk of fire or electric shock.
• For electrical work, contact the dealer, seller, a qualified electrician, or an authorized service center.
- Do not disassemble or repair the product. There is risk of fire or electric shock.
• Always ground the product.
- There is risk of fire or electric shock.
• Install the panel and the cover of control box securely.
- There is risk of fire or electric shock.
• Always install a dedicated circuit and breaker.
- Improper wiring or installation may cause fire or electric shock.
• Use the correctly rated breaker or fuse.
- There is risk of fire or electric shock.
• Do not modify or extend the power cable.
- There is risk of fire or electric shock.
• Do not let the air conditioner run for a long time when the humidity is very high and a door or a
window is left open.
- Moisture may condense and wet or damage furniture.
• Be cautious when unpacking and installing the product.
- Sharp edges could cause injury. Be especially careful of the case edges and the fins on the
condenser and evaporator.
• For installation, always contact the dealer or an authorized service center.
- There is risk of fire, electric shock, explosion, or injury.
!
!
!
3

4IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
• Do not install the product on a defective installation stand.
- It may cause injury, accident, or damage to the product.
• Be sure the installation area does not deteriorate with age.
- If the base collapses, the air conditioner could fall with it, causing property damage, product failure,
and personal injury.
• Use a vacuum pump or Inert (nitrogen) gas when doing leakage test or air purge. Do not compress
air or Oxygen and do not use Flammable gases. Otherwise, it may cause fire or explosion.
- There is the risk of death, injury, fire or explosion.
• Do not turn on the breaker or power under condition that front panel, cabinet, top cover, control box
cover are removed or opened. Otherwise, it may cause fire, electric shock, explosion or death.
Operation
• Take care to ensure that power cable could not be pulled out or damaged during operation.
There is risk of fire or electric shock.
• Do not place anything on the power cable. There is risk of fire or electric shock.
• Do not touch(operate) the product with wet hands. There is risk of fire or electrical shock.
• Do not place a heater or other appliances near the power cable. There is risk of fire and
electric shock.
• Do not allow water to run into electric parts. There is risk of fire, failure of the product, or
electric shock.
• Do not store or use flammable gas or combustibles near the product. There is risk of fire or
failure of product.
• Do not use the product in a tightly closed space for a long time. Oxygen deficiency could
occur.
• When flammable gas leaks, turn off the gas and open a window for ventilation before turn the
product on. Do not use the telephone or turn switches on or off. There is risk of explosion or
fire.
• If strange sound, smell or smoke comes from product, turn the breaker off or disconnect the
power supply cable. There is risk of electric shock or fire.
• Stop operation and close the window in storm or hurricane. If possible, remove the product
from the window before the hurricane arrives. There is risk of property damage, failure of
product or electric shock.
• Do not open the inlet grill of the product during operation.(Do not touch the electrostatic filter,
if the unit is so equipped.) There is risk of physical injury, electric shock, or product failure.
• When the product is soaked (flooded or submerged), contact an authorized service center.
There is risk of fire or electric shock.
• Be cautious that water could not enter the product. There is risk of fire, electric shock, or
product damage.
• Ventilate the product from time to time when operating it together with a stove, etc. There is
risk of fire or electric shock.
• Turn the main power off when cleaning or maintaining the product. There is risk of electric
shock.
• When the product is not be used for a long time or the product use first time after test
running, turn on main power switch before 6hours ago.
• Take care to ensure that nobody could step on or fall onto the outdoor unit. This could result
in personal injury and product damage.
CAUTION
Installation
• Always check for gas (refrigerant) leakage after installation or repair of product. Low refrigerant
levels may cause failure of product.
!

IMPORTANT SAFETY INSTRUCTIONS
ENGLISH
• Install the drain hose to ensure that water is drained away properly. A bad connection may cause
water leakage.
• Keep level even when installing the product. To avoid vibration or water leakage.
• Do not install the product where the noise or hot air from the outdoor unit could damage the
neighborhoods. It may cause a problem for your neighbors.
• Use two or more people to lift and transport the product. Avoid personal injury.
• Do not install the product where it will be exposed to sea wind (salt spray) directly. It may cause
corrosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause
product malfunction or inefficient operation.
• Contact the authorized service technician for repair or maintenance of this unit.
• Contact the installer for installation of this unit.
• When the power cord is to be replaced, replacement work shall be performed by authorized
personnel only using only genuine replacement parts.
• Installation work must be performed in accordance with the National Electric Code by qualified and
authorized personnel only.
• The air conditioner should be used only for the applications for which it has been designed : the
indoor unit is not suitable to be installed in areas used for laundry.
Operation
• Do not expose the skin directly to cool air for long periods of time. (Don't sit in the draft.) This could
harm to your health.
• Do not use the product for special purposes such as preserving foods, works of art, etc. It is a
consumer air conditioner, not a precision refrigeration system. There is risk of damage or loss of
property.
• Do not block the inlet or outlet of air flow. It may cause product failure.
• Use a soft cloth to clean. Do not use harsh detergents, solvents, etc. There is risk of fire, electric
shock, or damage to the plastic parts of the product.
• Do not touch the metal parts of the product when removing the air filter. They are very sharp! There
is risk of personal injury.
• Do not step on or put anything on the product. (outdoor units) There is risk of personal injury and
failure of product.
• Always insert the filter securely. Clean the filter every two weeks or more often if necessary. A dirty
filter reduces the efficiency of the air conditioner and could cause product malfunction or damage.
• Do not insert hands or other objects through the air inlet or outlet while the product is operated.
There are sharp and moving parts that could cause personal injury.
• Do not drink the water drained from the product. It is not sanitary and could cause serious health
issues.
• Use a firm stool or ladder when cleaning or maintaining the product. Be careful and avoid personal
injury.
• Replace the all batteries in the remote control with new ones of the same type. Do not mix old and
new batteries or different types of batteries. There is risk of fire or explosion
• Do not recharge or disassemble the batteries. Do not dispose of batteries in a fire. They may burn or
explode.
• If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not
use the remote if the batteries have leaked. The chemicals in batteries could cause burns or other
health hazards.
• If you eat the liquid from the batteries, brush your teeth and see doctor. Do not use the remote if
the batteries have leaked. The chemicals in batteries could cause burns or other health hazards.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
5

6TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
2TIPS FOR SAVING ENERGY
3IMPORTANT SAFETY INSTRUCTIONS
7BEFORE USE
7Preparing for operation
7Usage
7Cleaning and maintenance
7Service
8PRODUCT INTRODUCTION
8Name of parts
9Indoor unit controls and indicators
10 Wireless remote controller
11 Remote control preparation
12 OPERATING INSTRUCTIONS
12 Cooling Mode
12 Airflow Setting
12 Fan Speed Setting
13 Dehumidification Mode
13 Power Cooling Mode
13 Fan Mode
13 Simple Reservation
14 Child Lock Operation Function
14 Auto Restart Operation
15 MAINTENANCE AND SERVICE
15 Indoor Unit
16 Operation Tips
17 Troubleshooting Tips! Save time and money!
17 Call the service immediately in the following situations

BEFORE USE
ENGLISH
7
Preparing for operation
• Contact an installation specialist for installation.
• Use a dedicated circuit.
Usage
• Being exposed to direct airflow for an extended period of time could be hazardous to your
health. Do not expose occupants, pets, or plants to direct airflow for extended period of time.
• Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves
or other heating devices.
• Do not use this air conditioner for non-specified special purposes (e.g. preserving precision
devices, food, pets, plants, and art objects). Such usage could damage the items.
Cleaning and maintenance
• Do not touch the metal parts of the unit when removing the filter. Injuries can occur when
handling sharp metal edges.
• Do not use water to clean inside the air conditioner. Exposure to water can destroy the
insulation, leading to possible electric shock.
• When cleaning the unit, first make sure that the power and breaker are turned off. The fan
rotates at a very high speed during operation. There is a possibility of injury if the unit’s power
is accidentally triggered on while cleaning inner parts of the unit.
Service
For repair and maintenance, contact your authorized service dealer.
BEFORE USE

8PRODUCT INTRODUCTION
ENGLISH
Name of parts
Indoor unit
1Left/Right Airflow Control Louver
2Up/Down Airflow Control Louver
3Air Outlet
4Display Panel
5Air Inlet
6Air Filter
1
2
3
4
5
6
PRODUCT INTRODUCTION

PRODUCT INTRODUCTION
ENGLISH
9
Indoor unit controls and indicators
1. Room temp. / Set temp. display
2. Auto operation lamp
3. Fan mode operation lamp
4. ON/OFF button
5. Operation mode selection button
6. Room temperature setting button
7. Indoor fan speed button
8. Outdoor Operation lamp
9. Reservation lamp
10. Indoor fan speed lamp
11. Power cool lamp
12. Dehumidification operation lamp
13. Cooling operation lamp
4
5
6
7
1
13
3
2
12
11
10 98

10
ENGLISH
PRODUCT INTRODUCTION
Handling the remote control
- Aim at the signal receptor on the floor standing type air
conditioner when operating.
- Block a strong light over the signal receptor with a
curtain or etc. so as to prevent the abnormal operation.
(ex: electronic quick start, ELBA, inverter type
fluorescent lamp)
- Be sure that there are no obstructions between the
remote control and the signal receptor.
- Do not drop or throw the remote control.
- Do not place the remote control in a location exposed to
direct sunlight, or next to a heating unit, or other heat
source.
31
6
8
11
4
9
10
12
2
5
7
No. Control
panel Description
1
Power ON/OFF button :Operation
willstart when this button is pressed,
andstop when the button is pressed
again.
2Temperature setting button
3Indoor fan speed button : To select the
desired fan speed.
4Cooling button
5Fan mode button
6Air flow direction button(Up/down) :
Adjust air flow direction verti-cally.
7Air flow direction button(Left/right) :
Adjust air flow direction horizontally.
8ON/OFF timer setting button : Set
thetime of starting or stopping
9Artificial intelligence
10 Dehumidification button
11 Power cooling mode button :
Powerfulcooling is performed
12 Auto Air flow operation button : It is
useless in this model
Wireless remote controller
Tabla de contenidos
Otros manuales de Acondicionador de aire de LG

LG
LG AS-H096PBC0 Manual de usuario

LG
LG ARNU60GM3A4 Manual de usuario

LG
LG LSI090CP Manual de usuario

LG
LG LS-Q076ABL Manual de usuario

LG
LG PRARS1 Manual de usuario

LG
LG A122CS NF0 Manual de usuario

LG
LG ARUN040GSS0 Manual de usuario

LG
LG LW2512ER Manual de usuario

LG
LG C09AWM Manual de usuario

LG
LG AK-Q240BC01 Manual de usuario

LG
LG VR182CE NC0 Manual de usuario

LG
LG L8UH100BFA0 Manual de usuario

LG
LG MFL40910613 Manual de usuario

LG
LG S10DMV Manual de usuario

LG
LG D05RX SW0 Manual de usuario

LG
LG LW2415HR Manual de usuario

LG
LG ARTCOOL LA091CNP Manual de usuario

LG
LG ARTCOOL LA121CNM Manual de usuario

LG
LG M092CD Manual de usuario

LG
LG LP-K3063ZA Manual de usuario





















