Lexmark MS710 Series Manual de usuario

Moving Guide

Before moving the printer

CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer

damage:

•Turn off the printer, and then unplug the power cord from the electrical outlet.

•Disconnect all cords and cables from the printer.

•If two or more optional finishers are installed, then remove the finishers individually from the printer.

Notes:

–Make sure to remove the topmost finisher first.

–To remove the finisher, hold the finisher on both sides, and then lift the latches to unlock the finisher.

•If the printer does not have a caster base but is configured with optional trays, then remove the trays.

Note: Slide the latch on the right side of the optional tray toward the front of the tray until it clicks into place.

Moving Guide

Page 1 of 3

•Use the handholds located on both sides of the printer to lift it.

•Make sure your fingers are not under the printer when you set it down.

•Make sure there is adequate clearance around the printer.

•Use only the power cord provided with this product or the manufacturer's authorized replacement.

Warning—Potential Damage: Damage to the printer caused by improper moving is not covered by the printer warranty.

Selecting a location for the printer

CAUTION—POTENTIAL INJURY: The printer weight is greater than 18 kg (40 lb) and requires two or more trained

personnel to lift it safely.

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any options,

then leave enough room for them also. It is important to:

•Set up the printer near a properly grounded and easily accessible electrical outlet.

•Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156

standard.

•Provide a flat, sturdy, and stable surface.

•Keep the printer:

–Clean, dry, and free of dust.

–Away from stray staples and paper clips.

–Away from the direct airflow of air conditioners, heaters, or ventilators.

–Free from direct sunlight and humidity extremes.

•Observe the recommended temperatures and avoid fluctuations:

Ambient temperature 15.6°C – 32.2°C

Storage temperature 10°C – 43.3°C

Moving Guide

Page 2 of 3

•Allow the following recommended amount of space around the printer for proper ventilation:

1Right side 305 mm (12 in.)

2Front 508 mm (20 in.)

3Left side 305 mm (12 in.)

4Rear 305 mm (12 in.)

5Top 115 mm (4.5 in.)

Moving the printer to another location

The printer and its hardware options can be safely moved to another location by following these precautions:

•Any cart used to move the printer must have a surface able to support the full footprint of the printer.

•Any cart used to move the hardware options must have a surface able to support the dimensions of the hardware options.

•Keep the printer in an upright position.

•Avoid severe jarring movements.

Shipping the printer

When shipping the printer, use the original packaging or call the place of purchase for a relocation kit.

Moving Guide

Page 3 of 3

Otros manuales para MS710 Series

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora de Lexmark

Lexmark

Lexmark MS810 Series Instrucciones de instalación

Lexmark

Lexmark C530 series, C532 series, C534 series Guía de referencia rápida

Lexmark

Lexmark Multifunction Laser Instrucciones de instalación y mantenimiento

Lexmark

Lexmark W812 Hoja de información del producto

Lexmark

Lexmark E 330 Manual de usuario

Lexmark

Lexmark C 762 Manual de usuario

Lexmark

Lexmark C748 Guía de configuración

Lexmark

Lexmark MX611 Series Instrucciones de instalación

Lexmark

Lexmark 22W0020 Manual de usuario

Lexmark

Lexmark B2236 Manual de usuario

Lexmark

Lexmark E460DN - Taa Govt Compliant Guía de configuración

Lexmark

Lexmark X950 Series Manual de usuario

Lexmark

Lexmark 650dn Manual de usuario

Lexmark

Lexmark Color Jetprinter Z13 Manual de usuario

Lexmark

Lexmark W840 Manual

Lexmark

Lexmark T642 - Monochrome Laser Printer Manual de uso y cuidado

Lexmark

Lexmark E350d Manual de usuario

Lexmark

Lexmark MS810 Series Manual de usuario

Lexmark

Lexmark MS810de Manual técnico

Lexmark

Lexmark C782n Manual de usuario

Lexmark

Lexmark XM3150 Instrucciones de instalación

Lexmark

Lexmark printer Manual de servicio

Lexmark

Lexmark Multifunction Laser Instrucciones de instalación y mantenimiento

Lexmark

Lexmark Color Jetprinter Z42 Manual de usuario

Manuales populares de Impresora de otras marcas

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario

IRA3D

IRA3D POETRY4 Manual de usuario