Lexmark Z82 Manual de usuario
Edition: October 2000
The following paragraph does not apply to any country where such provisions are incon-
sistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION ìAS
ISî WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in
certain transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodi-
cally made to the information herein; these changes will be incorporated in later editions.
Improvements or changes in the products or the programs described may be made at any time.
Comments about this publication may be addressed to Lexmark International, Inc., Department
F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom
and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe
House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information
you supply in any way it believes appropriate without incurring any obligation to you. You can pur-
chase additional copies of publications related to this product by calling 1-800-553-9727. In the
United Kingdom and Eire, call 0628-481500. In other countries, contact your point of purchase.
References in this publication to products, programs, or services do not imply that the manufactur-
er intends to make these available in all countries in which it operates. Any reference to a product,
program, or service is not intended to state or imply that only that product, program, or service
may be used. Any functionally equivalent product, program, or service that does not infringe any
existing intellectual property right may be used instead. Evaluation and verification of operation in
conjunction with other products, programs, or services, except those expressly designated by the
manufacturer, are the userís responsibility.
Lexmark and Lexmark with diamond design are trademarks of Lexmark International., Inc., regis-
tered in the United States and/or other countries.
© Copyright 2000 Lexmark International, Inc.
All rights reserved.
UNITED STATES GOVERNMENT RESTRICTED RIGHTS
This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or
disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the
Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 and in applica-
ble FAR provisions: Lexmark International, Inc., Lexington, KY 40550.
i
Some functions that are shown in this publication may not be on your
Lexmark Z82 printer.
Statement of Limited Warranty
Lexmark International, Inc., Lexington, KY
This warranty applies to the United States and Canada. For customers outside the U.S.
and Canada, refer to the country-specific warranty information that came with your
printer.
Lexmark Z82 Scan/ Print/ Co y
This Statement of Limited Warranty applies to this product if it was originally purchased
for your use, and not for resale, from Lexmark or a Lexmark remarketer, referred to in this
statement as “Remarketer”.
Warranty
Lexmark warrants that this product:
• Is manufactured from new parts, or new and serviceable used parts,
which perform like new parts,
• Is free from defects in material and workmanship,
• Conforms to Lexmark’s official published specifications, and
• Is in good working order.
If this product does not function as warranted during the warranty period, contact a
Remarketer or Lexmark for repair without charge.
If this product is a feature or option, this statement applies only when that feature or
option is used with the product for which it was designed. To obtain warranty service, you
may be required to present the feature or option with the product.
If you transfer this product to another user, warranty service under the terms of this
statement is available to that user for the remainder of the warranty period. You should
transfer proof of original purchase and this statement to that user.
Su lemental Information
ii
Warranty Service
The warranty period is twelve months and starts on the date of original purchase as shown on the
purchase receipt.
To obtain warranty service you may be required to present proof of original purchase. Warranty
service will be provided at a Remarketer or a Lexmark designated location. You may be required to
deliver your product to the Remarketer or Lexmark, or ship it prepaid and suitably packaged to a
Lexmark designated location. You are responsible for loss of, or damage to, a product in transit to
the Remarketer or the designated location.
When warranty service involves the exchange of a product or part, the item replaced becomes the
property of the Remarketer or Lexmark. The replacement may be a new or repaired item. The
replacement item assumes the remaining warranty period of the original product.
Replacement is not available to you if the product you present for exchange is defaced, altered, in
need of a repair not included in warranty service, or damaged beyond repair. Also, such product
must be free of any legal obligation or restrictions that prevent its exchange.
Before you present this product for warranty service, remove all programs, data, and removable
storage media.
For further explanation of your warranty alternatives and the nearest Lexmark authorized servicer in
your area, please contact Lexmark at 1-800-539-6275, or on the World Wide Web at
http://www.lexmark.com.
Free remote customer support is provided for this product throughout its warranty period. Lexmark
offers a variety of extended warranty programs that include an extension of customer support. For
products no longer covered by a Lexmark warranty, customer support may only be available for a
fee.
Extent of Warranty
We do not warrant uninterrupted or error-free operation of a product.
Warranty service does not include repair of failures caused by:
•
Modification or attachments
•
Accidents or misuse
•
Unsuitable physical or operating environment
•
Maintenance by anyone other than Lexmark or a Lexmark authorized servicer
•
Operation of a product beyond the limit of its duty cycle
•
Failure to have installed a maintenance kit as specified (if applicable)
•
Use of printing media outside of Lexmark specifications
•
Use of other than Lexmark supplies (such as toner cartridges, inkjet cartridges, and ribbons)
•
Use of other than Lexmark product or component
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN
DURATION TO THE WARRANTY PERIOD. NO WARRANTIES, EXPRESS OR IMPLIED, WILL
APPLY AFTER THIS PERIOD.
iii
Limitation of Liability
Your sole remedy under this Statement of Limited Warranty is set forth in this section. For any claim
concerning performance or nonperformance of Lexmark or a Remarketer for this product under this
Statement of Limited Warranty, you may recover actual damages up to the limit set forth in the
following paragraph.
Lexmark's liability for actual damages from any cause whatsoever will be limited to the greater of 1)
$5,000 or 2) the amount you paid for the product that caused the damages. This limitation of liability
will not apply to claims by you for bodily injury or damage to real property or tangible personal
property for which Lexmark is legally liable. In no event will Lexmark be liable for any lost profits, lost
savings, incidental damage, or other economic consequential damages. This is true even if you
advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any
claim by you based on a third party claim.
This limitation of remedies also applies to any developer of materials supplied to Lexmark.
Lexmark’s and the developer’s limitations of remedies are not cumulative. Such developer is an
intended beneficiary of this limitation.
Additional Rights
Some states do not allow limitations on how long an implied warranty lasts, or do not allow the
exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or
exclusions contained in this statement may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to
state.
Electronic Emission Notices
Federal Communications Commission (FCC) Com liance Information
Statement
The Lexmark Z82 Scanner, Printer and Copier has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The FCC Class B limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult your point of purchase or service representative for additional suggestions.
iv
The manufacturer is not responsible for any radio or television interference caused by using other
than recommended cables or by unauthorized changes or modifications to this equipment.
Unauthorized changes or modifications could void the user's authority to operate this equipment.
NOTE: To assure compliance with FCC regulations on electromagnetic interference for a Class B
computing device, use a properly shielded and grounded cable such as the Lexmark part number
1329605 for a parallel attach or 43H5856 for a USB attach. Use of a substitute cable not properly
shielded and grounded may result in a violation of FCC regulations.
This product is designed, tested and approved to meet strict global safety standards with the use of
specific Lexmark components. The safety features of some parts may not always be obvious.
Lexmark is not responsible for the use of other replacement parts.
Any questions regarding this compliance information statement should be directed to:
Director of Lab Operations
Lexmark International, Inc.
740 West New Circle Road
Lexington, KY 40550
(859) 232-3000
Industry Canada Com liance Statement
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Safety Information
•
If your product is NOT marked with this symbol, , it MUST be connected to an electrical
outlet that is properly grounded.
•
The power cord must be connected to an electrical outlet that is near the product and easily
accessible.
•
Refer service or repairs, other than those described in the operating instructions, to a
professional service person.
•
This product is designed, tested and approved to meet strict global safety standards with the
use of specific Lexmark components. The safety features of some parts may not always be
obvious. Lexmark is not responsible for the use of other replacement parts.
v
Contacting Lexmark
Lexmark Customer Su ort
North America
United States http://support.lexmark.com
1 800 539 6275
Canada 1 800 539 6275
Introduction
vi vi
Introduction
Overview .............................................................. 1-1
About This Guide .................................................. 1-2
Main Features ...................................................... 1-3
Printer Components .............................................. 1-4
1
Chapter
Setting up Your Printer
Overview ............................................................... 2-1
Unpacking Your Printer ......................................... 2-2
Connecting the Printer Cable ................................ 2-4
Connecting the Power Cord .................................. 2-7
Loading Paper into the Input Tray ........................ 2-8
Installing the Print Cartridges .............................. 2-10
Testing the Printer ............................................... 2-16
Installing the Printer Software ............................. 2-17
Uninstalling the Lexmark Software ..................... 2-25
2
Chapter
Introduction
viivii
Using the Control Panel
Overview ............................................................... 3-1
Control Panel Buttons ........................................... 3-2
Control Panel Display ........................................... 3-4
3
Chapter
Print Media
Overview ............................................................... 4-1
Media Size ............................................................ 4-2
Print Media Characteristics ................................... 4-3
Paper Guideline .................................................... 4-4
Using the Manual Feed Slot ................................. 4-5
4
Chapter
Printing Tasks
Overview ............................................................... 5-1
Selecting the Printer ............................................. 5-2
Printing a Document ............................................. 5-3
Using Features in the Printer Driver ..................... 5-7
5
Chapter
Introduction
viii viii
Making a Copy
Overview ............................................................... 6-1
Making a Single Copy ........................................... 6-2
Making Multiple Copies ......................................... 6-3
Changing Copy Setup ........................................... 6-4
Collated Copying ................................................... 6-6
Making a Clone Copy ........................................... 6-7
Printing Posters ..................................................... 6-9
6
Chapter
Changing Printer Setting
Overview ............................................................... 7-1
Selecting the Paper Size ...................................... 7-2
Selecting the Paper Type .......................................7-3
7
Chapter
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Impresora todo en uno de Lexmark
Lexmark
Lexmark X1100 Series Manual de usuario
Lexmark
Lexmark X925de Manual de usuario
Lexmark
Lexmark CX510de Manual de usuario
Lexmark
Lexmark MX610 Series Instrucciones de instalación y mantenimiento
Lexmark
Lexmark C91x Manual de usuario
Lexmark
Lexmark X850e Manual de usuario
Lexmark
Lexmark XM7155 Manual de usuario
Lexmark
Lexmark MS00308 Manual de usuario
Lexmark
Lexmark W810n - Optra B/W Laser Printer Manual de servicio
Lexmark
Lexmark MX510 Series Manual de usuario
Lexmark
Lexmark X204N series Manual de usuario
Lexmark
Lexmark X84 Manual de usuario
Lexmark
Lexmark X215 Manual
Lexmark
Lexmark MB2442 Manual de usuario
Lexmark
Lexmark X1100 Series Manual de usuario
Lexmark
Lexmark X95x Manual de usuario
Lexmark
Lexmark 90P4000 Manual de usuario
Lexmark
Lexmark 6500E Manual de usuario
Lexmark
Lexmark X6100 Manual de usuario
Lexmark
Lexmark X644E - With Modem Taa/gov Manual de usuario
Manuales populares de Impresora todo en uno de otras marcas
Triumph Adler
Triumph Adler DC 2016 Manual
Epson
Epson WorkForce WF-2510 Guía del usuario
Epson
Epson Stylus Scan 2000 Manual de instalación y operación
Epson
Epson PictureMate Snap PM 240 Manual de instrucciones
Konica Minolta
Konica Minolta bizhub C35 Manual de usuario
Brother
Brother MFC-J430w Manual de usuario
